Swing, located on the plot, will be a source of good mood for children and adults
Traditional materials for the manufacture of outdoor swing for the garden with his own hands are metal and wood. In order to improve reliability and external characteristics can combine these materials as well as partially decorate metal structure decorative forging.
Car owners may resort to old tires. They will be combined perfectly with beds made of similar material.
There are a large number of original and easy swing that can beautify the landscape of any country site.
Swings can be classified and other grounds. The following types of products by type:
Before we get down to business, it is necessary to prepare the necessary materials and tools.
The first thing to do - is to prepare the pipe. Cutting of material is carried out as follows:
Elements destined for a base should be fixed by welding at an angle of 45 °. Next, welded to the uprights crossbar at 90 °.
For installation design should dig two trenches. The width of these recesses should match of the resulting assembly of a tripod, and depth -. At least 0.8 m between trenches should fit the width of the crossbar.
The deepening will be installed bearings swing. Pre should form on the bottom pad of sand. Thickness -. m 0.1-0.2 Thereafter mound carefully compacted. Above the base structure is installed, the recesses is filled with concrete mortar.
To prepare the mixture, mix sand, gravel and cement in the following proportions: 2: 1: 1 (respectively). To this mixture, add and knead liquid solution. As a result, you should get a homogeneous mass. Take care that it is not too liquid.
Driving device garden swing: 1 - the screws for fixing the backrest and the seat brackets; 2 - strap; 3 - frame corners rocking seats; 4 - a base rod swings farm; 5 - rivets; 6 - connecting strip seat and seat suspension stiffness; 7 - lateral rod swings farm; 8 - compound awning support frame ends; 9 - cord for hanging rocking seats; 10 - carabiner; 11 - ring; 12 - scarf-strut; 13 - the top bar of the swing farm; 14 - connecting bolts with washers and nuts; 15 - a bolt-lock insert; 16 - the insert with the hole and internal thread by the connecting bolt; 17 - Wide Spacer; 18 - support frame for an awning; 19 - washer; 20 - a bolt connecting rod with an upper side; 21 - bolt - 2 pcs. (Steel strip with screws)
On solidification of the concrete takes about a week. Up to this point it is not recommended to mount the seat to the bar, which can be held with ropes or metal bars. Making sure that the solution is dry, attach a method of welding the hooks and set the seat on the ropes. If the metal beams are used, weld it to the seat. When the structure is fully prepared and installed, it can be inked to make the swing beautiful appearance and to protect the metal from corrosion.
This technology is considered the creation of their own hands Children's outdoor swing for the garden of wood, which can simultaneously accommodate multiple kids. The dimensions of the swing can be changed at your discretion.
Children's swing with your hands: 1 - the lateral outer portion of the seat frame - 2 pcs. (90h35h375); 2 - side the inner part of the seat frame - 2 pcs. (70h35h375); 3 - cross member of the seat frame - 2 pcs. (90h35h375); 4 - the vertical part of the armrest - 2 pcs. (45h35h275); 5 - vertical back part - 2 pieces. (90h35h650); 6 - horizontal detail of the armrest - 4 pcs. (45h35h530); 7 - the upper part of the armrest - 2 pcs. (145h20h585); 8 - the upper chain holder - 2 pieces. (45h35h300); 9 - the bottom chain holder - 2 pieces. (70h35h150); 10 - front and rear part of the seat frame - 2 pieces. (90h35h1300); 11 - back crossbar - 1 pc. (90h35h1400); 12 - seat board - 1 piece. (90h20h1170); 13 - seat board - 3 pieces. (90h20h1230); 14 - a back board - 12 pcs. (90h20h850)
The market offers a variety of screws in different colors. Hue fasteners can effectively beat in swing design, so you should pay attention to the color of the screws. Picking up the hardware to match the tree, you can hide the junction of construction details. Screws contrasting colors would create an interesting effect.
If you take up the production of his own swing, simplify your work can be a simple way - make a plan and try to stick with it. It is advised to prepare a draft, make drawings and outline them all the dimensional parameters, space fasteners, analyze future product for reliability.
If you do not have experience in the preparation of drawings, use the finished project. Photo baby swing with your hands, which you can find on the internet will help you to choose the best design. Do not forget, there is a big difference between a swing designed for adults, and children's versions of products.
At predefined parts (a length of 1.5 m each) that perform a cut strictly at right angles. Boards having a thickness of 2 cm, intended to seat the device. In the manufacture of the backrest is better to let the board with a thickness of 1.2-1.3 cm. Seat strap 32 is required, of which 15 have a length of 0.45 m, the remaining 17 - 0.5 m.
Useful advice! To prevent cracking of the wood during the mounting screws, drill design elements, are subject to bonding, the small holes.
If you want to make a more comfortable and convenient design of the seat back, it should give a shaped form. Use board with a large thickness to achieve the desired result (cross-section - 5x15 cm). You need to make 6 pieces. Using marker or pencil markings to apply the appropriate workpiece.
Then you need to determine the angle of the backrest is secured. Fixing bars made with the same pitch. Take care that the straps were installed smoothly. To do this, follow the first fixation on the sides, and then - in the middle.
Increase the comfort of the swing operation will allow the installation of armrests. It is recommended for this purpose to use timber. The width in this case is not important and is chosen according to their own wishes. The armrests on the one hand are fastened to the frame of the backrest, on the other - are attached to the seat.
In the next stage circuit can be mounted on a welded frame. The optimum place - armrest lower zone, that is, where it connects to the seat. Take special connector, which is arranged on the one hand the ring and on the other - is a thread. He is attached to the bar and frame of the seat. Subsequently, through these rings will pass circuit.
Drawing chair with a backrest and side walls to swing (cm): 1 - the horizontal element sidewall - 4 pcs. (5h5h70); 2 - a connecting rod - 3 units. (D = 2,5 cm, length 80 cm); 3 - reinforcing square - 4 pcs. (2,5h10h10); 4, 11 - vertical sidewall elements - 4 pcs. (5h5h37,5); 5 - backrest frame element - 2 pieces. (5h5h37,5); 6 - grating element backs and seats - 13 pcs. (D = 2,5 cm, length 58 cm); 7 - element seat frame - 2 pieces. (5h5h67,5); 8 - guide cord pendant - 2 pieces. (D = 2,5 cm, length 10 cm); 9 - pin - 4 pcs. (D = 1 cm, length 7 cm); 10 - seat retainer (d = 2,5 cm, length 68 cm)
To fix the swing is better to use a rack of A-shaped. As the support members need to take a strong timber. Anyone who knows how to handle the welding machine, can undertake the production of a metal frame.
Many masters, engaged in manufacturing swing for suburban areas, prefer racks A-shaped, since they provide a high level of reliability, durable and withstand high load. At this stage, you will need the same set of tools that you would with a seat. Of course, when it comes to the counter, made of wood. Otherwise, you will need welding machine.
The first thing you have to do is to make a stand. They should be the same and have the same size. Subsequently, you can install them at that distance that you will need. This rate depends on the width of the seating. To connect the supports to be used off.
To schedule a third mounting crossbar struts. It is at this level will be installing. As the locking elements can be applied and corners screws made of metal. Take care that the beam has been installed at the same height. Usually swings have a bar, but if you want to improve the strength of the structure, it is possible to install two.
For the installation of the base dig a hole in the ground. The maximum depth is 0.8 m. The construction is installed on a bed of gravel with a thickness of about 0.2 m. After the pillars have been placed inside their pour concrete mortar.
Considering that the timber is extremely susceptible to rotting should treat lower part racks antiseptic and perform isolation before the concrete foundation. For these purposes should be reserved waterproofing material. Suitable roofing material.
Because in the future design will be operated by children, you need to protect it. Acute angle side is round, bumps and burrs are removed by grinding.
Even if you did not make friends with a plane and the welding machine, it does not mean that a swing at their summer cottage will remain for you the luxury. There are plenty of simple design, with the manufacture of which you will be able to cope. And most of them do not require the purchase of some expensive materials. You can always armed with improvised means.
Pallets - a very popular type of material from which to make furniture for the home and garden. Due to their versatility, they can be used for the organization of the swing on a suburban area. To this end, it should be kept on hand one pallet, rope and wood, where the design will be suspended.
Even the products created on the basis of one pallet can have several versions. The one-piece element can be locked in limbo at the four corners with the help of ropes. That's enough to swing to perform its function. To create a cozy, top of the pallet is sufficient to put a small mattress and lay his blanket or sheet. Several pillows on top will be a kind of solution to the lack of a back.
Constructions of this type can be operated not only for reading books outdoors, but also for elementary rest from the midday heat in the shade. They can even be used for sleeping.
To create his own hands Children's swing with a full backrest need two pallets. As in the case of the wooden structures of the boards and beams, it also should be treated surface sandpaper to get rid of burrs. The product should be well cleaned and colored with the dye timber and intended for outdoor environments. It suffices to use and moisture-resistant lacquer, which does not spoil the beauty of the wood.
The easiest option is considered to be the seat of the swing in the form of a board, suspended with ropes. To prevent rapid chafing ropes on the sides of the board can be nailed two more details. Thereafter, 4-hole, through which ropes are threaded. For fixing the ends tied strong and tight knots. The structure itself can be fixed both on the tree and on the base support in U-shape.
Swing is suspended on a rope, can be made in another way. Instead of apertures formed in the board slots: a pair of end part and a pair of edges in the corner area. Seats (the board) may take the form of a semicircle or leave it straight. By the tension of the rope forces will not jump out of the grooves, despite the fact that they are open.
You can use many different materials up to vehicle tires to create swings to suburban area. It is enough to hang the tire on the branch of a tree with a rope. If you care about nature, it is not necessary to use a circuit - it hurts too much crust.
Some craftsmen attach the swing of the tire intricate carved shape. For the original design is enough to get a sharp cutting tool, and set pieces. Cutting the tire can do with the construction of the knife. Pre-applied to its surface markings for the incisions, using chalk or a dark marker. The finished product can be painted in bright colors or covered with drawings.
Swings of the two logs are small, interconnected rope, are very popular among gardeners. The main thing that the wood has been cleared, leveled and firmly connected.
There are several embodiments of fastening systems which can be used to swing. These options are the most common:
Swing with four fastening points (2 and 2 on the seat at the back) can be suspended in two ways. In the first case you reduce a chain or rope to the total ring which is snap connection. Then one of the ropes or chains fixed to the main crossbeam carabiner. As a result, you get two points of fixation on the crossbeam.
Another embodiment involves mounting a fixing system which is based on the use of 4 carbines, fixing each of the ropes or chains leading from the structure.
Swings in the form of benches may be secured on hooks which are mounted in the side walls of support pillars.
If you do not wish to be limited to the use of scrap materials, and want to create an original and beautiful design, you can use an interesting wood and metals.
Useful advice! Perfect product, adding to its design comfortable backrest or crossbar arranged in front. Thanks to this limiter you can improve the operational safety of the swing.
For mounting the swing is necessary to select a shady place, such as under a tree or a portion of the shed roof terraces. You can even equip the design itself roof or canopy, otherwise the product will have to cover the canvas or film in bad weather.
Any stable swing structure begins with instillation supporting pillars to a depth of 0.8 m. The remaining space in the recess is filled with concrete mortar. Then, the crossbar is connected to the uprights.
Apparatus wooden swing 1 - upper bundle (length 115 cm, width and thickness of the boards 10x5 cm); 2 - plaque-visor covering the bolt head and protects coupler weatherproof (length 145 cm, width and thickness 22,5h5 cm); 3 - two columns (height 275 cm, width and thickness 22,5h5 cm), the distance between the uprights - 105 cm, the ends of the struts are concreted into the ground to a depth of 60 cm; 4 - galvanized chain attachable to the top and bottom of the eyebolts on the turnbuckle; 5 - the seat (length 60 cm, width and thickness 15H5 cm)
What happens next depends on what type of material used to manufacture the product. If the swings are based on metal pipes, connection of all components is carried out only with the use of the welding machine. For supports of timber require pretreatment antiseptic and nuts and bolts as fixing elements.
The seat is made up of two frames. One of them will be back, the second - the seat. Fit the pieces of plywood on them or a tree. After this, you will fix the frame at an angle strictly 120 °.
To attach the seat to the rope or chain that runs special mounting brackets or hooks. This will allow the suspension design to the crossbar.
Note! Swings are hung so that human legs sitting on them could touch the ground.
construction design can be improved, decorating it or set it as the seat of some unusual object.
Attaching the seat to swing the bar is carried out by special clamps or hooks. If the design is held by cables need to purchase more and clamps, which will serve as retainers. Allowed the use of other materials, for example, chain or rope.
It is recommended to take a chain with large links. This will increase the life of the product due to the fact that the material from which they are made, are not afraid of the negative impact of weather conditions and temperature extremes. Moreover, the circuit often used to decorate the landscape. It will complement the design of the yard on a suburban area.
Suspension mounting area requires careful strengthening. In decorative purposes on the wooden seat, you can put a pillow, mattress or pull the top of the tent. These elements will not only beautify the product, but also enhance operating comfort, make it a pleasant vacation.
Since the construction is carried out for the children, it is better to equip seat swing good back support. As for the suspension, it is in this case less important.
Driving devices suspended from a swing car tire on a metal frame 1 - rack; 2 - tire; 3 - Welded calibrated chain; 4 - M12 bolt with an eye; 5 - sill № segment 14 whose length is 200 mm; 6 - 140x200 mm steel plate; 7 - M12
The area where the rest and entertain the children, should be safe. By following these simple rules, this can be easily achieved:
Children swings from a tree by his own hands, in the form of mouse and beetle
We should not forget the aesthetic side of the issue. Make a side part of the swing figured that children were interested. Sides can be made in the form of dinosaurs and cars, ships.