Ovens for bathhouse on the wood with water tank: general provisions

furnace apparatus on the wood with a water tank

Note! In some models, you can find the door with the glass. It is of sufficient thickness and has heat-resistant properties.

Most models offer a wide range of functions. Therefore, there exists the possibility to buy consumer inexpensively furnace for the bath with wood possessing enhanced functionality (e.g., manufacturer of bath furnaces TeplodarOr other brand).

This list may include the ability to:

• to carry out work in several modes;
• adjust the operating time;
• control the duration of the warm-bath facilities;
• set parameters regarding steam quality;
• adjust the temperature inside the tank and steam.

Wood oven for bath water tub

The principle of operation of cast-iron wood-burning stoves for baths

Fuel Bookmark in equipment made in several ways. This moment depends on the type of wood-burning furnace for the bath with the water tub. During the combustion of firewood formed ash and soot. These remnants of fuel are poured into the ash box through the grate. Ash box is cleaned of soot and ash manually. Chimney designed to output gaseous products of combustion arising during the combustion of firewood.

As a result, fuel combustion generates heat. The heated air is several times lighter than cold air, so it rises up on the rocks. Stones are heated, giving heat to the sauna room where comfortable temperature conditions are formed.

EXAMPLE device iron furnace of bath water tub

The ability to create optimal temperature conditions have wood stoves for bath water tub with external combustion chamber. In such constructions loading fuel into the chamber is carried out of the room adjacent to the steam room. The exhaust gases transfer heat, water is rapidly heated.

Useful advice! continuous burning furnace can efficiently perform the work for 6-10 hours. To choose the optimal design model, you can forget about the constant control of the furnace - will be sufficient to simply replenish the supply of fuel to the combustion chamber twice a day.

Types of furnaces for iron bath with wood (on the tank placement type), their characteristics

Most of the manufacturers releasing structures made under the strict design. Decorative glass to observe the flame equipped only stovesInstalled in the living room.

Wood-fired furnace design are considered the conventional equipment for this. During the combustion of wood in the room creates a pleasant aroma Russian steam rooms.

The furnace for the bath on the wood with various types of tank

Ready designs can have a different type of placement of the water tank:

• a furnace body (built-in capacity);
• on the tube, the escaping smoke (recommended purchase ready designs of this type, since flues in the bath unit for wood stoves with their hands requires significant knowledge and skills);
• separate from the structure (in these furnaces is integrated heat exchanger which serves as a connecting member between the structure and the tank rendered beyond it);
• Attachment type (attached to the body).

There are a number of popular designs for those who intend to buy a stove for a bath on the wood.

Average prices for furnace models with different designs:

Before buying a wood burning stove it is useful to become familiar with consumer reviews, which are mostly found on the network.

Properties furnaces for long bath with wood burning with integrated or half tank

Placing the water tank is a metal container. The embodiment with hanging on the outside tank or integrated in the furnace body is considered very inconvenient.

Built for the accommodation of the water tank does not allow to control the level of liquid in it. The water in this case under constant boiling, so you will need to organize additional systems for removal of steam.

Mounted tanks are characterized by rapid boiling, which is ahead of the time when the steam room starts normally heat thoroughly. It formed a negative phenomenon called "cold steam". This steam raises the level of humidity in the room, posing a serious obstacle to the formation of acceptable and comfortable conditions in the bath.

Oven with integrated tank for heating water

Tip! We recommend using birch logs, firewood alder. Efficient fuel is coal and peat briquettes. The wood must be dry to ensure rapid heating of the premises. The use of softwood should be abandoned. When it combustion formed a large amount of soot clogging flue.

In adjoined tanks of the heat consumed for heating the water, because of which increases during heating steam. Hot water must coalesce and diluted with cold, which creates additional inconvenience.

Related article:

Top photo finishing baths inside and description of the stages of work. It recommended the use of materials and installation practices. Sequence for finishing bath. Waterproofing and wall insulation.

Properties furnace with external water tank

External water tank is heated in two ways: from the chimney pipe or the chamber. When it comes to heating by the furnace, in metal or brick kilns coil assembly is performed directly in it. Such a coil with a pair of nozzles. They are located outside, where mounted external tank, which must be located far away from the heat source. The maximum allowable distance is 3 meters.

This requirement is because circulation inside the circuit will be in a natural mode. Buck hung on a wall inside or outside the steam room. It necessarily located above the level of the combustion chamber arrangement.

The metal bath furnace with external water tank

This makes it possible:

• temperature control mode;
• liquid level control;
• perform installation of a shower or faucet directly to the tank.

Such furnaces have disadvantages. During the warm-up areas are partially heat from the furnace goes into heating the water. Not do without it, because the system of flooding after the heating steam is prohibited because the boiling liquid, triggered by rapid cooling may occur in the hot pipes. Following this may be followed by a blow, and the destruction of the heat exchanger.

Wood-fired oven with water tank (heating by chimney)

The most advantageous option considered furnace designs in which the water tank is fed from the flue gas energy. The gaseous products of combustion are very hot. Therefore, the efficiency of the furnace is not reduced if some of the heat from the flue will be taken for servicing DHW.

Various embodiments of furnaces with a tank, in which water is heated by flue

Useful advice! The heating process can be organized in several ways. Allowed embedding tank with large volume into a chimney, the liquid therein will be heated by wood combustion products directly. It can be installed on the chimney pot small in size, equipped with two nozzles. They mounted outrigger container with a large volume.

Using heat from the combustion products to heat the water - the best way to organize the system, so Consumers have the opportunity to buy an oven for wood-fired saunas this and other modifications in a large variety.

Prices for popular domestic models:

There is no clear good or bad designs. Optimum furnace is chosen on the basis of the conditions of the room where you plan to install it, and individual customer requirements.

Ovens for bathhouse on the wood: how to choose the optimal design

If you plan to purchase a furnace with wood for the bath, to help facilitate the selection of a number of parameters that are worth paying attention to:

• thermal power level - depends on the size of the steam room (with high power in a small model the room will provoke overheating, and low-power oven in a large bath very quickly break down because of the high Load);
• kind of furnaces, which may be external or integrated. In the first case, the oven is served from the changing room;
• material - most of the models consists of a multilayer metal, thereby avoiding the appearance of burns due to accidental contact with the furnace body;

The water tank suspended from the outer side of bath furnace

• type furnace - bath with frequent use is recommended to install a closed structure which holds the heat for a long time. Upcoming embodiments furnaces installed in cabins, very rarely used;
• volume stones - a large number of stones contributes to longer retention of heat, and thus reduce wood consumption and;
• trademark - products of leading manufacturers is characterized by high efficiency and extensive functionality.

Note! Some models have a lining in the form of ceramic tiles or natural origin of the stone.

The specificity of the Finnish furnace for a bath on the wood of the popular manufacturers

Furnace structure of Finnish production is associated by consumers with the concept of reliability and comfort. The cost of goods is much higher than domestic. But the favorable characteristics of the Finnish production to justify the high price.

Finnish furnace associated with high reliability, comfort and ease of use

Popular brands:

• Kastor - heating carried out by the thermal radiation from the stones and the shell. The basis of the construction steps based on the principle of convection. The most advantageous characteristics of the product is high quality materials used in manufacture of ovens, an attractive exterior design, a special ventilation system and doors made from glass;
• Helo - lineup includes modifications for domestic use in home saunas (small power and price) and structures for public use saunas (wide functionality, high efficiency);
• Harvia - brand products are characterized by long periods of effective service, durability, ecological compatibility and high heat the room rate. Furnace efficiency;
• Narvi - equipment company offers consumers ease of use, simplicity and high heating rate.

The average cost of the Finnish stoves:

Construction wood burning oven for the brick and metal cottages

Brick structure are made with their own hands. For high-quality and rapid construction, you can enlist the help of professionals.

Useful advice!At the initial stage of the work is done the organization of the foundation. In contrast to iron or steel structures heavy brick furnace installation directly to the floor surface is unacceptable.

The stove made of bricks, built with his own hands

• pouring concrete mixture (thickness - 0.1 m);
• drying of over 3 weeks (formwork can be removed prior to final curing);
• installation of waterproofing, thermal insulation layers (sheet steel or asbestos board);
• stacking brick clay with the solution.

Organization of small furnaces for metal baths with their own hands, drawings, photos

Metal constructions less inert than brick. Their cooling is just as fast as heating. Steam rooms suitable for small compact version of the product with a tank placed above the chamber, which stores steam stones.

The compact oven-heater for the bath with the water tub (a - a continuous heater; b - heater batch): 1 - ashpan; 2 - furnace firebox laundresses; 3 - a tank filled with stones; 4 - a bucket with water; 5 - outlet chimney; 6 - buck water; 7 - a barrel filled with stones; 8 - the door for a couple

For self-manufacturing the housing need steel sheet 5.3 mm thick. It is possible to use steel pipe with a large diameter or barrel.

In the upper zone of the body are arranged to rock chamber. At the side of the door is mounted, through which will be watering steam stones.
Next performed lining, folding of the refractory brick of the firebox and the camera with stones.

Small metal stove for a bath with built-in tank

In operation of such a furnace flame and the hot gases will pass through stones and heat them together with water. For the removal of gases should organize the chimney from the middle of the tank. It is recommended to use the sandwich pipe.

Construction of furnace design their own hands a lot of advantages. However, without the appropriate skills and knowledge, it is better to resort to professional help, or buy ready-made design of cast iron or metal.