Entrance door with mirror: decoration or practical solution?

A decision on the question of what will be the decor is often dictated by the dimensions of the premises and their configuration conditions. Many of the interior elements appear due to a combination of convenience and necessity. One such extraordinary solutions has become the front door with a mirror, surprise and please the owners of small hallways. On what are the advantages of such a design, and if he has any obvious defects, read the article.

The benefits of installing the input mirror doors

Steel entrance door has become commonplace in modern apartments. It has many advantages, but its main advantage - is security. Currently, manufacturers are generous on the proposals for the manufacture of different versions of the door leaf, including its decorative finishes, as well as built-in shut-off safety system. Color solutions are also different variety of options, which is confirmed by photos of entrance doors on specialized sites. However demanding customer always wants something more. Therefore, due to the demands of the market relatively recently there was the original design - the front metal door with a mirror.

The mirrors in the interior are purely decorative and practical function. Designers use reception setup in a room mirror for visual expansion space, increase the degree of illumination, and so on. D. Installation of the mirror sheet on the door with the essential requirements for the organization of the hallway and is more functional and decorative load. The main advantages of the mirror to the door of the apartment are the following:

1. It creates a visual increase in small-sized hall space, the higher the dimensions of mirror set, the more effect can be achieved. Ideally, in this case to use the full-length mirror.
2. You can increase the illumination of the space, without the need for enhancing the brightness of lamps.
3. Specular fabric on the door is able to fully replace the traditional adjustable mirror in the hall, thus saving valuable space.
4. Eliminates the mirror door built-in closets.
5. May become bright decorative accent in the hallway.
6. Visually "facilitate" construction, as is easily seen in the photo: the doors "lose" its massiveness and heaviness.

Important!Noise insulation doors in the apartment with the installation of the mirror does not change.

Steel doors in the apartment with a mirror: design flaws

Input iron doors in the apartment are obliged, first of all, to carry out the main its function. Therefore, along with the decorative properties required collectively examine the practicality and safety of embedding mirror constructions generally for all occupants.

No matter how attractive a photo entry door with a mirror inside, the same construction price due to increasing complexity of its production will be higher than the value of its traditional counterparts. Especially noticeable differences when choosing mirrors with special properties: matt or semi-mat coating, Venetian glass, with an engraving, etching, etc... Also, the increase in prices affects the surface area occupied by the mirror. When used in the door structure additional mirror element significantly increases the load on the loop, in connection with which there are new demands on the hardware.

Quality accessories are expensive. Locking devices necessary to maintain security, will be non-standard - the so-called castles of invisibility, in which there is no keyhole to protect the mirror from possible scratches key. Also, there are difficulties regarding the installation eyelet: have to give up his position in the middle of the front door. Photo or diagram of mounting options manufacturers can offer the best, but it is possible that the review at the same time somewhat limited.

The disadvantages are the complexity of the care of the mirror unit and the difficulties associated with its replacement. Care - this is quite a demanding job. Keep clean the door mirror with built-in hard, but the presence of the respective detergents can solve this problem. To replace the glass is made complete dismantling of the door, that is. To. Its dismantling is only possible in a specialist workshop. Therefore, before installing the construction account the possibility of its safe operation.

People with mental or nervous disorders entrance door with a mirror installed in it can trigger depression or pathological conditions. Psychologists advise to give up such a placement of mirrors, if there are tenants in the apartment. household health should take precedence over the desire to improve the decor in the hallway.

Useful advice!If you organize the interior of the house, adhering to the principles of feng shui, the entrance door built-mirror is ideal for this, ie. k. reflect not input in the dwelling, and the inner situation.

How to choose the doors with glass inserts

Despite a number of negative aspects, reviews the front door with a mirror receives positive from the apartment owners, who have decided to take this step. All emphasize the convenience of the design, excellent heat and sound insulation, as well as a fairly quiet closing of the door. In most cases, workshops closers installed to soften the course and keep the mirror from vibration.

Which door is better suited for a particular property, decide only the owners of the apartment. They were always a choice of colors, trim strips, other visual solutions, as well as price segment. The door is installed in its place for a long time, so you should know a few rules that will ensure its trouble-free operation.

The main function of the front door - is the protection. Therefore, in the first place it is important to evaluate not ornamental design properties, and the thickness of the fabric, the presence of stiffeners and principles block mounting frame (with or without pins). Particular attention should be paid to the loops is better to choose the inner or hidden. In this case, the metal doors with a mirror will have a greater weight than similar models without mirror inserts, which requires reinforced hinges, designed for higher load.

It should specify in advance the installation features eye - his location or a complete lack of replacement with a video surveillance system. In addition, it is necessary to solve the question of the number of locks and bolts, as well as the mechanism of their action. The door can be mounted in any lock, but preference is given to a reliable mechanism, t. To. Access is difficult due to the fixed mirror inserts. You can select a hidden lock without keyhole, for which the key is an electronic control or a magnetic card.

Useful advice!It is recommended to equip the steel doors with mirror door closers or opening limiters. This will protect the unit from vibration and extend service life.

Door handle according to the design chosen, but should be based on a selection of quality materials and reliable models of well-known manufacturers. All plastic options are not considered at all, they, as well as lightweight construction, should be excluded.

It would be desirable to maximize the future owner of the mirror area, its size is determined by the dimensions of the door based on the indentation on the perimeter of not less than 20 cm. These conditions are dictated by the mounting features, ease of use of door handles and locks. If enhance safety of the mirror by bonding a transparent protective film, it is necessary to choose a high quality glass, or reflection will be distorted. Protective film mirror is able to prevent from cracking, as well as a strong impact not allow the fragments to scatter.

How to install a mirror on the front door with your hands

Inspired by the beautiful photos of iron doors with mirror, many craftsmen may decide to do the installation yourself. Technically, the process is simple to perform, you need to have a minimum of tools:

• It mirrors itself actually required size and quality;
• mounting adhesive for gluing mirrors, having a composition excluding damage amalgam;
• narrow decorative frame of suitable size, which will simultaneously perform a protective function of mirror edges;
• fasteners for fixing the frame;
• laying a mirror for vibration damping.

In carrying out the large-sized mirror of the installation of the door it is recommended to remove the hinges and place on a flat, hard surface. However, at home often do not remove the master door and pre-applied markings on it and perform the installation directly on the vertical door leaf. The reason is simple: remove and hang back the metal door is not as easy as it might seem at first glance, that is. a. there are difficulties, which are to fit hinges of the door frame and in the safeguarding of all locking mechanisms. However, in this way it is possible to attach only a small mirror cloth, otherwise require dismantling the door.

Completely safe way to organize the mirrored surface on the door - it is not installation of glass and sticking reflective tape. In this case, the mirror simulation performed flawlessly. You should also take an interest in specialized stores by the presence of the mirror sheet of Plexiglas, which is characterized by the undeniable advantages Security question (unbreakable), greatly facilitated weight, easy handling and mounting, as well as excellent moisture resistance performance.

Features installation of mirrors on the front door

Before you go to the store for the purchase of installation accessories, inspect the door and decide whether it is possible to install it on the mirror. There are a number of points, without which there is a risk of subsidence or skew block.

The first thing you should pay attention - this loop. They are the weakest link when the load increases. If the front door is made qualitatively and selected accessories worth it, not the fact that the structure is capable of supporting the added weight of the mirror.

Manufacturers calculate the load of the door leaf only the selected model. Weight Gain inner part (due to the mirror) capable entail early wear or breakage of hinges. Particularly sensitive to overload internal vandal-proof shelters. Perhaps loop degrade its work immediately, but their resources, however, will be reduced by 40-60% with an increase in the mass of the hinged only 10-15% due to the weight of the mirror. Replacing loops belong to the category of expensive repair work, so you should assess the degree of financial risk.

The second moment-is a mirror. Selectable quality tempered glass, the thickness of which should not exceed 3 mm. It's pretty thin surface which shall be securely fixed and not to create obstacles to the opening / closing, when you turn the knobs and keys in the keyhole. The front door to the apartment with a mirror should have free play. If there is a likelihood of hitting the closet, corner or other obstacle in the hallway, then set a safety stop. To strengthen the glass on the reverse side it is recommended to cover or conventional film tape.

You should also take into account the location of the eye. If it is supposed to be placed in the mirror, it is necessary to drill a hole in the glass of the corresponding diameter and perform the installation.

Entrance door mirror inside: fixation methods

Fix the mirror on the door in several ways:

• by a special glue;
• Using frames and mounting accessories;
• by means of powerful magnets.

Useful advice! The more massive adjustable mirror, the more reliable must be mounting.

The most popular type of installation involves the use of glue. However, one should take care purchase quality material having appropriate composition, intended solely for the mirrors and at the same time suitable for the surface of the inlet door. Before mounting the top layer of the door and the reverse side of the mirror degreased allowed to dry, and then the applied adhesive layer.

Now easy to find fasteners is not only durable, but also the corresponding decor. Mounting mirror frame should be executed efficiently. recommended pave seal (the rubber may be) installed between the retaining profile and the mirror. His task - to compensate for the vibration caused by opening and closing doors, and reduce the chance of chipping on the edges of the glass. Usually such assembling operate in conjunction with the use of an adhesive.

If the inner surface of the door is performed without application of MDF or other lining and contains only metal, the possible embodiment of the mirror to the flat powerful magnets. This method is quite affordable in the financial plan. The magnets can be bought without problems, and fix them on the door and the mirror must be a special glue. The only disadvantage of such a structure - is formed a gap that can be filled with padding or close decorative frame.

On the Internet you can find tips on installing mirror paintings on the door using double-sided tape. Experts do not recommend this method because of its extreme unreliability and high probability of falling glass when reusing the door. It is also double sided tape over time loses its retaining properties, particularly at elevated ambient temperature in the hot season.

Related article:

Front doors for private homes and apartments: reliability and design

The difference of structures and methods of operation. Independent production and installation tips. Repair, restoration and design treatment.

Entrance door with mirror: models and design variations

As soon became a fashionable design entrance doors with a mirror, and it increased the demand, manufacturers have launched models with all kinds of inserts in their products. Who in the manufacture of mirrors used different reflectivity, shape and even color. For their decoration using laser engraving, etching, toning, and even aging. The production technology allows embedding a mirror reflecting member in any door: metal, wood, glass and others. Very original mirror with lighting, built-in slopes, framed in a frame, which can also have a variety of texture and color solutions.

Entrance metal door with a mirror inside - is not the only option, where the mirror surface can be used. For example, reflecting the insert can be located outside. In this case, too, there are several options for its installation, which are selected individually, this should weigh up the advantages and disadvantages of the construction.

High full-length mirror can be replaced by the tie of highly polished stainless steel, which will save mirror effect and simultaneously will vandalproof, t. k. a similar surface can neither break nor scratch. It is difficult to imagine the outside of the mirror box to his full height to the front door of the apartment, but such a scenario is quite possible to arrange installation.

Sometimes mirror inserts operate in the door leaf in the form of through windows. However, this solution is applicable to a greater extent for private residences or luxury boutiques, and the element itself is usually protected by an additional glass or decorative wrought-iron grille. Decor looks like a very impressive and extraordinary, but this option will not differ ease of maintenance and cleaning of the front door with a mirror and soundproof.

Useful advice! In order to increase the strength through the insert and the outer mirror can be coated with a special film.

Glass doors are not recommended for installation to replace the mirror sheet. In this case, the applied technology for applying reflective mirror film. This option is suitable for office and other premises of commercial real estate, as it helps avoid aquarium effect and further enhances the strength of the glass front door.

Photo of entrance doors with a mirror in the different versions can be found on the Internet at manufacturers and design projects. The options are actually a lot, they are designed for any inquiries, but there is always a chance to order exclusive model. The price of the front door with a mirror on an individual project will be quite high. However, this plan will make it possible to take into account all the wishes of the customer design and create practical and creative decor.