The door to the bath and sauna: choose a beautiful model

Use bath only as a place for hygienic procedures is irrelevant. Rough wooden room with a stove, tubs, water brooms and no one is attracted. He was replaced by interesting projects with a modern design. The door performs differentiation function of thermal insulation and is a part of the interior, so her high demands. What are the design and what to consider when choosing a door for the bath, this article will tell.

Characteristics of the operation conditions of doors in a bath smokers

Modern country land is used in different ways. Some gardeners cultivate the land, growing fruit and vegetables. But most of them turned their holdings to a place of rest and recovery. Recent definitely try to build on a plot of Russian bath or sauna. No significant differences in terms of construction, these two types of structures are not only steam different degree of humidity.

In itself, the structure is quite specific. With a relatively small size of the room temperature difference they observed significant. High humidity levels have a steam room and a shower room. However, the rest of the room: locker room, rest room, dressing room - the moisture content should be possible to isolate. An important role in this respect play a door. It is their quality and proper installation will allow not to lose temperature to feel comfortable at rest, put on dry clothes after visiting the sauna.

Are important dimensions for doorways. for saunas and baths door should provide free passage, but not be large, so that there is no significant moisture and heat exchange at imminent opening-closing. The door to the steam room traditionally has fewer parameters than the front door to the bath, the dimensions of which are determined in proportion to the structure as a whole. The main technical requirements for the data structures are:

• perfect airtightness of the door leaf;
• no gaps between the door and Lutkov in the closed position;
• match the size of the door purpose room.

Experts do not recommend extra insulated, sheathing or paste over the door interior bath. Features of the environment in which they operate, a devastating effect on all types of glued joints. Therefore, you must carefully choose the material for the future design of the door.

Materials used for the manufacture of doors in a bath

Most recently, the doors to the room and the door to the steam room made entirely of wood. With the advent of new technologies to the materials used for the manufacture of structures of such purpose, it has expanded considerably. Selection should be made based on the taste preferences, and qualitative characteristics of the material with respect to the target destination. Today use:

• wood;
• glass;
• metal;
• plastic.

Wooden door for bath: the dignity of the material and recommended types of wood

The wood is very much a priority raw material used for the manufacture of doors. In addition to environmental friendliness, it has a number of characteristics that allow it to occupy a leading position:

1. Compliance processing. Wood product can be of any configuration, and add design elements with the help of thread or burning. Easy to apply any coating giving the desired design color or shade.
2. The ability to retain heat. There are voids, into which warm air penetrates between the fibers of the wood. There he delayed - there is a kind of barrier.
3. Nice smell. The aroma emanating from the door of the boards, in a warm room enhanced by creating the conditions for aromatherapy.

However, to apply for door to the bath is not recommended to all wood. The tree should be as moisture-and heat-resistant, dense. The most common used species - oak, alder, ash and linden. Most of all requirements are met by the oak. It's pretty expensive raw materials, significant costs money and its treatment. Other types of timber have approximately the same quality indicators. They are sufficiently heat resistant, can withstand high humidity, when properly treated long retain these qualities.

Selected tree species depending on where the door is installed. For the front door to the bath, you can use pine. Oak, alder, ash and basswood are suitable for any premises, including a steam room. We do not recommend installation of doors of this material only in the shower - on the condition that it will continue to get water.

Useful advice!When choosing a timber you must not only take into account its quality indicators, but definitely need to make sure that it is dry. Otherwise there is a risk to buy raw wood, the product of which can be deformed and cracked.

Glass doors in the bath: ideal for small spaces

Firmly established in the interior of the bath and glass doors. For rooms critically small size is the only way to get rid of the feeling of tightness causing discomfort. Glass door panels make the ease and lack of structures in their bounding box visually expands the space of the room.

Used transparent glass, frosted, tinted and colored. Ability artistically product by applying sandblasting method figure It makes glass doors present a masterpiece of design, able to embellish even the most modest interior. The main advantages of the glass doors are indisputable:

• unlimited service life;
• simple maintenance;
• no need for protective treatment;
• not deformed by temperature and humidity;
• is an interesting complement to the interior.

Colored or stained glass doors in a steam room and a pleasant softness color tint room. Glass used a strong, thick, tempered. Break it is almost impossible, it can withstand strong mechanical action. Even if the glass is broken, you should know that it shatters into pieces not sharp, so the likelihood of injury from negligible.

This type of door can be installed in any room baths, except for the entrance. More suited glass door to the steam room, where there is maximum exposure to moisture. It is recommended to put a glass door leaf in the showers, especially in the small size of the room when the door contact is inevitable with water. Sometimes they use dual door design. The frame is made of wood, it is inserted into the glass.

Useful advice! When installing a combined doors in a steam room, careful attention must be paid to the tightness of the connection places glass and wood. Without the use of special gaskets to avoid heat loss will not be possible.

Features of the conditions of use in the bath of plastic doors

Install in a bath made of plastic steel doors relatively recently. This is an inexpensive option to order which is quite simple. In addition, the installation of the product specialists requires little extra money. A number of characteristics meet the conditions of application data structures:

• moisture resistance;
• excluded fungus and decay;
• good airtightness;
• do not require treatment.

Lack of resistance to high temperatures restricts the use of such material. Do not install plastic door to the steam room. Even if the temperature reaches 100 ° C and PVC stand, the sealing gum crack from dryness and will cease to perform its function. Such doors are convenient in the shower, where the humidity is high, but the temperature is moderate. They can be installed in the rest room and other facilities available.

Use door PVC and acceptable as input design. It will be good to keep warm, it is not affected by temperature changes. But if the dressing room (or hallway) has no windows, the door glass will provide natural lighting. You can set and panel doors, it fits well into the overall exterior design of the bath.

Methods of decorating material is considerably smaller than wood and glass. The choice of colors and shapes within the available samples reduces the possibility of the implementation of individual design ideas. When installing the doors of PVC to avoid oversaturation of errors. Many plastics, especially white, gives the room an official appearance. It is better to use the material, stained wood.

Metal constructions for doors

Metal door in the bath is set as an input. For other areas it is not suitable due to its heavy weight, visual massiveness and high thermal conductivity, heat conducive to high temperatures. It perfectly fulfills its function, delaying the heat and being a reliable protection against the penetration of the thieves. Metal door with vandal-proof canopies becomes practically inaccessible to tampering.

From inside the door can be clad array or clapboard. This will increase the thermal insulation, creates a protective layer for the metal and make the product more environmentally friendly, "natural" visually. Fabricated metal products have different shades of color, interesting finishes, look stylish and modern.

Related article:

interior doors ekoshpon: types, properties, production and installation stages

Affordability. The unique properties. The pros and cons of the material features of care. Color and size design.

They are fire-resistant, not deformed, ready-made options do not require treatment. To a frosty time of year, returning to the bath after grinding the snow, not to touch ice metal hand door, you need to attach a large and comfortable wooden on the outside handle.

Useful advice!By purchasing the metal door for a bath, you should pay attention not so much on the thickness of the metal, but rather on the quality of anti-corrosion coating.

How to make a door to the bath with his hands: step by step guide

The reasons for deciding to take up the manufacture of doors with their hands, there may be several:

• you can save;
• confidence in the quality performance;
• realization of their own ideas and moral satisfaction.

Regardless of which contributed to the decision to self-manufacture, it is necessary to know how to do the door to the bath with his hands. The most accessible material for the self-production of a tree.

Common models - paneled door, and the product of the array. Making paneled kind requires serious skills and the availability of expensive tools, so the strength is not for everyone. Let the second embodiment.

How to make a wooden door to the steam room: training material and tools

Make a door from the array may well be your own. This is a great option for installation in the steam room. Start manufacturing it is necessary to the drawing where you want to display the options door in relation to the size of the sauna, noting hinge attachment points, handles. Direct manufacturing process required to be carried out in several stages.

The workpiece materials. doors needed for the manufacture of:

• decking width of 35-50 mm;
• key - beams 30x45 mm;
• two wooden handles;
• loop of stainless steel (3 pcs.).

The wood should be dry, preservative-treated, to have knots and cracks. The recommended size of the door to the steam room - 70h170 see.

Preparation tool. Make the door with his own hands, as well as any other wood products, it is impossible without a certain set of tools. Even if the purchased polished materials, they must be sawn need processing sections locations surface leveling boards and collected t. D. This will require tools:

• saw or jigsaw;
• planer (preferably electric);
• sander or sandpaper;
• router manual or machine;
• chisel;
• metal and rubber mallet.

Removing accurate measurements. Despite the drawing better again before use to remove measurements from the inside of the box.

Useful advice!When removing the measurements must be considered that a slight swelling of the wood inevitably high moisture, so it is necessary to place the door leaf abutting box to leave a gap of at least 4 mm.

Wood door with his own hands: processing and connection material

Placing and connection boards. Sawn boards must be put on the bench (or on a table with a flat table top) and collect into a single fabric. To joints were without cracks, it is recommended to tamp planks with a rubber mallet and use a carpenter's glue. How to make the door not only geometric, but also beautiful? To do this, lay boards are not arbitrary, and try to create a certain pattern of the natural wood structure. This will give the product decoration.

Processing wooden shield. The remaining one side protrusion of the tongue is cut, the surface being processed. Then in several places web shrinks and clamps retained until the adhesive dries. Then a plane surface irregularities are removed, the shield polishes. The ends with a router brought to the ideal state.

Dowelling. Key - timber having a shape of a trapezoid. Its length must be equal to the width of the door. The key is applied to the wide side panel, make a mark, which then performed incisions, it is desirable to have a recess 1.5 cm. Then the timber between the parallel cuts must be removed with a chisel. The surface of the sample needs to be done after the maximum level to lay firmly tongue.

Useful advice!Deepening prepared for the key, should be treated with an antiseptic to prevent the appearance of fungus, swelling and other damage at this point.

Then you need to put on the surface of the recess by a carpenter's glue and a rubber mallet to hammer the key. At this stage of the manufacture of doors can be creative imagination, making this item not in the form of a right prism, and narrowed on one side. Insert the key is better than vertical height of the door leaf, and lift up or lower down. This will complicate the process, but add decorative product. Next, you need to embed a loop. Handles recommended that you install after hanging the door.

method described above can be manufactured and input wooden door to the bath. Thickness of boards for such doors should be at least 50 mm.

An ambitious project: an independent production of the glass door for a bath

The glass door to the sauna - it is modern, comfortable and stylish. Can I make it with your own hands? Yes, but the process requires proficiency glass cutting and the presence of certain conditions. Buy a jumbo-size and cut it on their own will not work. Cut tempered glass, and it is used for doors, it can not be, because it would break into pieces. But if there are sheets b / y, after the dismantling of the remaining windows, glass partitions and shower, and other applications for them there, it's worth a try. There are two ways.

Perform antizakalivanie by placing the glass in water and bringing its temperature by a furnace heating to tempering temperature (above 600 ° C). Then it is necessary to cool the glass to room temperature and by diamond stekloreza do the same, that do normal cutting glass: mark marker cut glass cutter, cut put under line round wooden rod small size (6 mm diameter) and press.

To return the strength of glass after cutting it is necessary to harden again, put in water and heating the furnace to the required temperature (repeat process), then immediately cool, the cold method of applying a blowing.

The second method is less laborious. Be transported glass professional who will try to cut it with a laser.

It should be borne in mind that neither the first nor the second method does not guarantee a positive result. The main reason - the peculiarities of the process of the primary hardening. The situation is further complicated by the lack of information about the technical characteristics of the glass. But if the material being cut out, it is necessary to polish the edge of a special stone and buy interesting accessories that will enhance the product. Made with their own hands the door to the bath of glass will be a good complement to the interior.

Features door installation in bath made of various materials

Doors made of different materials, different method of installation. But there are some rules, the implementation of which is a prerequisite for any design:

• matching the size of the door of the box;
• specifications hardware must meet a potential mechanical load on it;
• outdoor way of opening.

The consequence of non-fulfillment of the first two requirements can become skewed structure, which prevents the normal operation of the doors. Neglecting the last rule is a violation of fire safety instructions.

Wooden door installation sequence and possible problems

Set the door to the bath, as practice shows, it is not easy. There are important accuracy and good eye. The acquisition unit (boxes and doors) is the most acceptable option. In such cases, the size of fit and correct them is not necessary. Collect this design is better in horizontal position: less likely to make a mistake when exhibiting canopies. In the box and the end of the door using a chisel recess made on the fired thickness.

The canopy is attached with screws, the design is completely assembled on the floor. In this position, perfectly visible clearance dimensions. Then the door removed from its hinges, the box is inserted in the door and locked. Installing it should be carried out necessarily using a level. Then the door is hung again.

If the box is executed separately and have already installed, hang the door will be problematic. The main difficulty is usually the markup for loops. Perform hanging doors in such circumstances need two. Looped awnings better to choose universal appropriate dimensions, with a good corrosion-resistant coating. For doors of boards 50 mm thickness and dimensions 170h70 is recommended to use three loops.

Useful advice!The gap between the frame and the door must be the same on all sides. This is important not only for aesthetics, but for normal door operation. Even the slightest subsidence it can not enter into Lutkov.

Subtleties install glass doors for saunas

Glass door, which is not used in the bath, often not set in a wooden box, and the aluminum frame. In such a situation to make a mistake (the curvature, inclination) is practically impossible. But metal in the sauna is unacceptable, therefore, to establish the door to the bath as the wooden and glass, can only be in a box made of wood. It should be fixed to the wall with screws and have a perfectly smooth edges and lines.

Since the threshold using the glass door is not mounted, must be left between the door and the floor clearance to 5 mm, so that the door freely opens and closes. Hardware on the door leaf is mounted in specially designated areas. On a bar boxes should make accurate mark to hinged door was flat in the horizontal plane and had sharp angles. In the groove of the box laid the silicone seal that provides sealing and soft closing.

Useful advice!For the manufacture of glass doors with their hands for the bath range of accessories you need to do based on the weight of the door and the surface quality. When fixing between the metal and glass should be placed special gasket.

Performance of plastic door for sauna installation

Widespread plastic doors received including due to simple installation. Door blocks from PVC never has flaws such as skew or curvature. All tailored to the millimeter, so the product is easy to install. The main condition - exactly set the door. But on their own, such blocks are almost no sets. Company selling these doors always offer the installation service, the payment of which does not require large expenditures.

The dimensions of the door to the sauna and shoot specialists, so that errors in this area are virtually eliminated. If, however, the installation is performed independently, it is necessary to adhere the basic sequence of actions characteristic for mounting any door unit. Be sure to monitor the clamping bars door to Lutkov: it must be the same along the entire perimeter. If necessary, should be removed from the trim box and adjust the distance by means of fixing bolts.

It requires certain skills rather than the installation of the door block of PVC, and adjustable accessories. Door handles must be pressed smoothly and effortlessly. If they squeak when driving or canopies make sounds, be sure to call a specialist. Such signs may indicate a hardware defects in manufacture. Adjusting work accessories - warranty service.

Price doors for bath: the cost of the door leaf and pre-engineered

An important consideration when selecting a model of the door to the bath is the price. Among the large number of proposed wooden products can select an option which will satisfy the cost and design.

The door to the bath of lime with a minimum of artistic treatment costs 4,000 rubles on average. If the door leaf is acquired unit with the box, the price increases by 10-15%. Significantly increases the cost of the wooden door of the presence of the thread. And paneled doors made of grooved boards made from one type of timber, will vary in value by about 40%. In this case, the value of feature affects manufacturing technology - paneled design will cost more. Exactly the same model of alder and oak will cost respectively 8000 and 19000 rubles.

Glass doors for saunas and baths can also vary greatly in price. For example, the door of transparent tempered glass 6 mm thick no box is 3500-4000 rubles. The presence of the box increases the product price of about 1000 rubles. If the thickness of the same glass of 8 mm, the cost increases to 1500 rubles. The average price of a glass door to the bath - 5000-7000 rubles.

The cost of construction with a decorative pattern - 8000-10000 rubles. Spraying, toning, and the presence of the figure significantly increase the price. In many ways it depends on the manufacturer. The cost of glass doors 8 mm thick with Turkish art processing production exceeds 20,000 rubles. The price of plastic doors for the bath starts from 4500-5000 rubles.

The door to the bath: creative and design ideas

Solving the problem of how to make the door to the room and the material from which, at the same time will have to decide what would be its appearance. With a large variety of tastes and preferences of the base material walls, and the bath main construction is wood. If you install a wooden door design, the color should not be different from the color of the walls. Permissible difference - by one to two shades lighter or darker. You should not get involved in unnecessary thread that there was no sense of a demonstration of artistic creativity. Bath - a place of mental and physical relaxation, so the interior should be soft, to create comfort.

Organically coexist with tree glass door, especially a tinted and frosted glass. Choose options with a pattern (eg, flowers) is in if the room (for example, recreation room) does not have to design floral arrangements. The bath is unacceptable oversaturation.

Consideration should be given to treat the neighborhood in wood and plastic bath. Better to choose the color of plastic, simulating tree. But there may be a white door. At heart, they should create a composition likely to interior decoration than from the outside. Shower rooms (and hence the door) usually have a remote location and have little effect on the overall visual style. Other doors have a close proximity, so they must be presented in the same style.

Usually in the bath does not make a lot of windows. In some places (in the steam room, shower, locker room), they often do not install. Comfort creates a soft diffluent artificial light. Doors and windows for the bath need not be made of the same material. Traditional white plastic box suitable for any room. And if it turns out to be "a loner", the situation can be corrected by a variety of shades, including the blinds.

If you do not want to make a door with your hands, you can buy ready-made design. Currently, there are many different models developed by professional designers. It remains only to take advantage of offers. And it needs to see the photo door to the bath and choose the desired option, which will make the interior unique.