Sand is calculated in tons or cubic meters
Content
-
1 How to determine how much weight a cube of sand: material characteristics
- 1.1 Why is it important to determine how many cubic meters of sand to 1 ton
- 1.2 The density of the sand
- 1.3 Size fractions of sand
-
2 Varieties of building sand: What is the weight of each cube 1
- 2.1 Sand for construction: how many cubic meters per ton
- 2.2 Occupancy of ZIL and KAMAZ truck how many cubes of sand in the back
How to determine how much weight a cube of sand: material characteristics
Many owners of country houses are trying to figure out which one cubed weight of sand. This figure is particularly relevant for a country construction, affecting such serious arrays works as the construction of a building or arrangement of the yard and the local area. How much is 1 cube of sand delivery - one of the pressing issues of any person who undertakes an independent construction or purchase of material concerned for salaried workers.
Depending on how many kilograms in a cube of sand, will be calculated the basic proportions of the concrete mix. This point is very important because an incorrect calculation result in violation of technology and serious consequences.
Sand is used for a wide range of construction works
Why is it important to determine how many cubic meters of sand to 1 ton
The indicator reflects how much a kilo in 1 cube of sand, with erroneous calculations can cause a lot of difficulties:
- violation formulation of concrete mix;
- wrong consistency of the finished solution;
- loss of adhesive properties;
- low quality of concrete;
- violations in the process of solidification;
- decrease in strength of concrete;
- premature failure of the structure made of cement mortar.
For this reason, it is important to determine not only how much sand in 1 cube, but a weight of the material contained in this volume.
Note! In most cases, used as the standard weight measure 1 cubic meters of sand. It is this unit is regarded as a generally accepted measure for calculations. In spite of this and in reference tables, you can find other options, such as sand in tonnes / cubic meter. m or in grams / cc. cm.
When calculating the necessary amount of sand cubes allow for its specific weight
An indicator of the cube 1 as kg of sand contained in said volume, is called the specific weight or specific gravity. This measure is applicable to bulk materials is in the range 1500-2800 kg / m³. As you can now estimate how many kilograms in a cube of sand.
On the value of the specific weight of the material can affect a variety of factors, including:
- mineral composition;
- grain composition;
- size fractions;
- humidity level;
- the percentage compaction;
- impurities.
Compaction paving tiles with wet sand
The density of the sand
Today, many are concerned about the cost of sand cube, but few know what the final price is affected by the characteristics of the material, one of which is the density. Sand, gravel and the like, refers to discharge of bulk materials. The level of its density depends on the air gaps which are formed between the solid particles.
Related article:
What is the weight of concrete cube? Main characteristics and composition. General information about the concrete mixture, the weight determination. Variations in concrete depending on the material. What affects the weight of the concrete?
sand density is:
- technology;
- real;
- bulk - is the specific weight ratio of sand to the volume occupied by these pictures. In this case, the volume includes not only solid particles of sand, but also all pores and voids, available as part of the mound (taken as a basis for determining how many cubic meters of sand in a bag or bucket);
- true or conditional - the value is considered as a limit of the ratio of the specific weight of the material to the volume occupied by them, net of all available as part of the mound and then voids.
Sand Density ranges 1.3-1.8 t / m³, and is equal to 1.3 t / m³ to river sand, and 1.4 ton / m³ - career.
building sand density is from 1.3 to 1.8 tons per 1 cubic meter
Useful advice! In fact, it is impossible to determine, taking as a measure of a bag or bucket, how many cubic meters of sand in this volume will contain. The indicator of the true density of the material will always be higher than the real, it can be considered only in theory (conditionally). As for the practical application of such measures, such as a bucket or a bag of sand, how many cubes in the container will be valid - depending on the bulk density.
Size fractions of sand
How many cubes in a bag of sand material - can be determined in view of its grain composition. It is sufficient to sift grains using special sieves. As a result, you will be able to determine the level of particles in the gravel material having certain dimensional data. Usually the calculations used fineness modulus material.
Table 1. Fineness modulus of sand:
| Material type | Size fractions, mm |
| Small | 1,5-2 |
| Average | 2-2,5 |
| Large | more than 2.5 |
If before you fractions exceeding 2.5 mm in size, most likely you are dealing with career or river sand, how much weight the cube of the material in this case will depend on the water demand.
In accordance with the particle size of the material is divided into two classes:
- I - 1.5 mm;
- II - any dimensional data.
From the class of the material and the size of its factions depends on how much it costs 1 cube of sand for construction work.
There are three size fractions of sand - small, medium and large
Varieties of building sand: What is the weight of each cube 1
On how much weighs 1 cube of sand affects its variant, a method of storing and humidity levels. According to GOST, standard building sand weight is 1550-1700 kg / m³ (18,5-20,4 kg / bucket). Weight of dry loose sand is 1440 kg / m³, and tamped - 1680 kg / m³. Wet standard sand has a weight of 1920 kg / m³.
There are several types of sand. Classification is carried out on the basis of how and where the material was produced. The sand used in construction, is:
- river - mining area is located on the bottom of rivers. The material is characterized by purity, hue is gray or yellow. Size fractions varies between 0.3-0.5 mm. It is used for the preparation of mixtures, solutions, the organization of the drainage system;
The most popular types of sand in construction - river and career
Note! Despite the demand for river option, buyers interested in a career and sand. How cube weighs the material in this case it depends on the amount of impurities that may be in the form of fine dust particles or pebbles.
- Mining - exploitation is carried out using the open method. Size fractions varies within a broad range - 0,6-3,2 mm. Scope applies to foundation work, construction of sidewalks. Additionally sifted and washed sand quarry used in finishing and plastering, and also in a compounding preparation screed;
- Marine - mining area is the sea bottom. Scope is extensive, but the material is not in high demand because of its high cost.
Table 2. Sea, river and pit sand: how much weighs 1 cc and 1 bucket:
| type of sand | M³ Specific gravity (kg) | Specific bucket weight (kg) |
| River | 1630 | 19,5 |
| Career | 1500 | 18,3 |
| Nautical | 1620 | ∼ 19,4 |
Price sand river with the delivery of the cube is the most accessible of all, if you want to buy the natural origin of the material. However, there are other types of sand - produced by artificial means.
Artificial sand types:
- slag;
- quartz;
- expanded clay.
There are types of artificial sand of expanded clay, slag and quartz impurities
Sand for construction: how many cubic meters per ton
The specific weight of sand per 1 cu. m volume calculated by the formula:
m = V * pwhere
m - mass of matter;
V - volume;
p - the density level.
By using this formula you can find on the table how many cubes in a ton of sand, and what is its weight in terms of the conventional unit volume. For 1 cu. m weight of the material is equal to its density index and bulk density can usually be found in the suppliers involved in the sale and delivery.
To calculate the weight of sand need to know the volume and density
Useful advice! Weighted affects another parameter - level of humidity. Most often it is 6-7%. If the material is wet, this value increases to 20%. Said difference to be added to the weight of sand.
Occupancy of ZIL and KAMAZ truck how many cubes of sand in the back
Despite the large tonnage of KAMAZ as cubes of sand in the back of the car still want to know everything buyers, as this is a common measure of weight value to be used in all calculations.
At KAMAZ usually have 12 cubic meters of sand. How ZIL in his body can hold, it is also a useful value, because many vendors carry out the delivery of building materials and in the smaller sizes. In this case, the capacity is 3 m³. MAZ is used for the delivery of 6 m³.
KAMAZ body can hold up to 18.5 tons of sand
It is very important to find out in advance when ordering sand, how much is the cube of the bulk material, necessary for you, and how much it contained kg.
The average price of river sand is 8000 rubles. / M. cube career -. 500 RUR / m.. cu. How much does the sand delivery - depending on the provider, the volume of sand and distance. Average prices for a service within a single city and the area is 2000-3000 rubles.
