Catalytic gas heater: A Review and Specifications

Question Heating relevant in our region than anywhere else - quite a harsh climate makes to think of home heating system during the cold season. But when it comes to stand-alone systems that do not require expensive and complex installation, a lot of questions. Consider one of the most popular options - catalytic gas heater: advantages, disadvantages, and especially the use.

Catalytic gas heater: the principle of operation of the apparatus

Catalytic heaters appeared on open spaces of our country recently, but that did not stop them from occupying at the moment a worthy position in the market. Their work is fundamentally different from those used in other gas appliances. In the standard procedure fuel entering the burner is subjected to combustion, whereby thermal energy is emitted.

Among the disadvantages of this method of heat production may be mentioned the fact that large amounts of combustion by-products released in the process. This adversely affects both the efficiency of the device, and the ratio of oxygen and carbon dioxide in the room. Catalytic heaters, these disadvantages are unusual, since the principle of their operation is different.

combustion process in the catalytic gas heater does not imply the presence of flame. Instead, the following processes occur:

• when the unit starts to warm up the catalyst surface. Depending on the mode selected temperature may range from 200 to 500 ° C;
• preparing at this time the air-fuel mixture in a special chamber;
• on a heated plate catalyst enters the liquefied gas, which under the influence of factors burns without forming a flame.

Typically, the plate, which is used in catalytic heaters, made from glass fibers with the addition of a platinum powder. This allows the device to be not only safe, but also environmentally friendly. Moreover, thermal efficiency of such a system is much higher than the gas burners standard scheme that explains the popularity of these devices.

Variety of catalytic heaters

Catalytic Heaters may differ from each other depending on the fuel used, as well as some peculiarities. Since the internal heater device directly affects its performance, consider a basic group such devices:

• gas heaters - the most common, but not the only option. It is based laid process burning propane-butane mixture. This option is ideal for heating of country houses or garages. The most powerful devices capable of easily heat the whole building sites or warehouses. Maximum power devices, offered for sale - 4900 watts. Although the process of releasing hazardous impurities apparatus and products of combustion does not occur, with particular attention is to use such devices in premises with an area less than 20 m²;
• Gasoline catalytic heater - a device which has a built in advance for the fuel tank. It is connected to the catalytic cartridge, where petrol vapors are fed to undergo oxidation. Such models are modest in size, to allow for easy use in hiking, fishing and hunting;

Useful advice!For added convenience, some models of portable catalytic heater additionally equipped with hob. This allows you to make cooking in field conditions more comfortable.

• Heaters running on the dry fuel or technical alcohol. This compact model, which, as well as gasoline, intended for use in the field. Their only enough heat to cover the minimum requirements - such as heating the food, water, and drying clothes providing heat inside the tent. Such models are characterized by low weight (about 1-1.5 kg) and small size. Inside the structure there is always a special compartment into which the container with alcohol or, where appropriate, a gas cylinder.

In addition to the basic types, there is another - catalytic multi-fuel heaters. This type of device capable of operating on any available fuel - both liquid and gaseous. The power of such a device is usually from 500 to 1200 watts.

Infrared catalytic gas heater to give

Another parameter on which to distinguish catalytic heaters, - the presence of an infrared emitter. Models with complement are dot impact due ceramic panels and reflectors disposed on the inner surface. Since the thermal energy, transforming into infrared radiation into the environment.

Such devices tend to have extremely high performance and run on gas fuel. Their use is not limited to heat homes. Often you can find these heaters on the street: they can be fitted with a summer areas and verandas. Due to IR-radiation devices do not consume energy for warming ambient air, and the impact on surrounding objects by heating them.

It is difficult to say for sure what kind of gas heater is better: an infrared or catalytic without diffuser. In the second case, the instrument warms up the air, but not objects that are absolutely not appropriate when it comes to the installation of the street. In any case it is necessary to further explore the issue of gas catalytic heaters: reviews of each model can be easily found on the Internet and draw the appropriate conclusions.

Useful advice! If you need to heat a large area, it is best to consider the option of a heater with a fan heater. This addition to quickly raise the temperature of the air in the room.

Advantages and disadvantages of heating a catalytic heater

Before you buy a catalytic heater, you need to understand all the pros and cons of this heating method.

Advantages of the catalytic heater:

• Catalytic heater for cottages or houses do not have a negative impact on the indoor climate. It does not disturb the natural balance of oxygen and carbon dioxide, and no harmful substances are typically formed in the combustion process, thereby maintaining a healthy environment;

• device considerably safer than traditional gas, since there is no risk of poisoning by excessive release of carbon monoxide. In addition, there is no risk of fire. Such a device can be used without fear and in the house, and in a tent, and in the industrial workshop;
• another important advantage - the ability to adjust the power of the device. This allows not only to maintain a comfortable temperature, but also significant savings;
• Mobility - easy enough to move even the big and powerful devices, not to mention the compact heaters. According to the owners of the devices in a review, catalytic heaters often fit easily into a bag or backpack.

Despite the abundance of important advantages, catalytic heaters are not without drawbacks:

• such devices have a limited operational period enough - about 2500 hours. The fact is that in using the catalyst gradually fade over time and needs to be replaced. The amount is about 2/3 of the cost exactly the same new equipment, so it's easier to throw out the old appliance and buy a new one;

• quality and life of the catalytic heater is directly dependent on how well refined fuel you use. Poor quality gasoline or industrial alcohol very quickly lead to the device unusable.

Catalytic heater for the home and garden: the safety of using

If you are thinking about whether to buy a catalytic heater for garden or home, probably the most important selection criterion will be the safety of the product.

There is a misconception that the catalytic gas heaters can be unsafe and can jeopardize the lives and health of users. In fact, it is not. Of course, as with any other device with a catalytic heater is necessary to observe safety rules, which are designed to reduce the potential risks to a minimum.

As for the impact of the heater on the human body, it is safe to say include carbon monoxide as a result of the oxidation process not formed and, respectively, in the room not accumulates. Hence, the risk of poisoning to get there. In the case of the use of infrared radiation applied only long waves, which are not only not harmful, but even useful.

Note! Repeatedly, it was confirmed that the infrared wavelength radiation having a positive impact on both the nervous and the immune system of a person, a beneficial effect on the state of health general.

The most popular brands and models of catalytic gas heaters

Companies that offer really high-quality products in the market of heating equipment is not too much. Therefore, choosing a suitable option for themselves, pay attention to the costs reputable manufacturers. Try to understand the device which companies are the most popular, and also consider the features of some models of these manufacturers.

Gas catalytic heaters Bartolini

Plants for the famous Italian brand Bartolini enjoys great popularity in Russia. Releasing enough powerful devices (from 2900 to 4200 watts), this company has provided a warm set of houses. The main emphasis manufacturer has made the full independence of the device there is any communication. All models run on LPG.

Popular catalytic gas heaters Bartolini:

model name	Characteristics	Dimensions, weight	price, rub.
Bartolini pullover k turbo plus	Power - 2900 W; Available pezorozzhigom; approximate fuel consumption - 0.2 kg / h; volume provided by the cylinder - 27 liters	780h430h420 mm 13.5 kg	15750
Bartolini pullover k	Power - 2900 W; pezorozzhigom absent; approximate fuel consumption - 0.2 kg / h; volume provided by the cylinder - 27 liters	780h430h420 mm 13.5 kg	11480
Bartolini pullover i	Power - 4200 W; It has three modes of power, as well as safety sensors; gas flow rate 0.1 / 0.2 / 0.3 kg / hr W respectively 1400/2800/4200	780h430h420 mm 13.5 kg	13200
Bartolini primavera k	Power - 2900 W; 3 has a power mode; Available pezorozzhigom; approximate fuel consumption - 0.2 kg / h; volume provided by the cylinder - 27 liters	780h430h420 mm 13.5 kg	11480

The most popular among the models uses the gas catalytic heater Bartolini pullover k. Responses about him the most positive, while the value of this device is one of the most accessible. At the same time, if you want to heat the room, the area of ​​which exceeds the standard for these devices is 35 m², can be purchased Vartolini pullover i. It has more power and can easily heat the approximately 50 m².

How to choose a gas catalytic heater: Vartolini pullover k, Vartolini pullover i, or any other of the proposed options to solve worth based on personal preferences and operating conditions of the premises, which It is expected to heat. In any case, there is no doubt in the quality and reliability of the device manufacturer.

Heating equipment company Sampingaz

The second most popular place confidently takes Sampingaz company. For more than 60 years, this French firm produces equipment items, mainly - gas. The emphasis the company is doing to ensure the most comfortable stay in nature at any time of the year. And a great example - gas catalytic heater Sampingaz cr 5000 turbo.

The maximum capacity of this heater - 3000 W, the device is equipped with its regulator and pezopodzhigom. Device sufficiently economical - when used at maximum power consumption is no more than 0.2 kg / h.

Gas catalytic heaters Kovea

The Korean company Kovea closes the top three among foreign manufacturers whose gas heaters are popular today. This company is ready to offer its customers a wide variety of models, as well as amendments thereto, - specially refined fuel.

The table with the characteristics of the three best models of heaters Kovea:

model name	Characteristics	Dimensions, weight	price, rub.
Kovea KH-2006	a small street heater with a capacity of 1040 watts; It consumes 0.75 kg / h	25h24h23 see packaging 1.4 kg	6460
Kovea KH-0203	Power - 1670 W; fuel consumption - 0.12 kg / h	34h28h19 see in the package; 2.1 kg	10130
H-0710 Fire Ball	intended for use in the campaigns; Power - 900W; in available piezo element	190x180x190 mm 565 g	6233

Gas heater catalytic Argo

If you wish to purchase more budget heater, pay attention to the gas catalytic heater Argo domestic production. This device is widely used for heating porches, garages and industrial premises, where sufficiently high level of air circulation. Use this device in small or confined spaces impossible.

In most cases, the heater Argo applied as necessary to maintain a high temperature in the greenhouse or shed, where the animals are. Many farmers use it to grow their products.

The device also runs on liquefied gas, which enters into it from the container through a special hose. The volume of the cylinder plug can be from 5 to 15 liters. At a power of 2900 W apparatus consumes only 0.25 kg / h of gas, burning it in the panel, preheated to 800-900 ° C. The percentage of carbon dioxide does not exceed the target of 0.01%. And yet, as has been said above, use the heater in poorly ventilated areas is not recommended.

The device is small, but significant weight. With dimensions 420h330h210 mm weighs 6.7 kg, which makes difficult the movement of the serious distance. However, for stationary use Argo heater is quite suitable for this. All the more so to purchase such a model can only 2,100 rubles.

How to choose and buy the catalytic gas heater

Buying any device, including a catalytic heater, requires attention. It should be possible to accurately represent where, in what circumstances and how often you plan to use the acquisition. When choosing important to consider both the price of the gas catalytic heater and reviews of real customers of this model.

To determine the required capacity of the unit will help the parameters specified by the manufacturer. On the packaging is usually indicated information about what the maximum area is able to cover the heater.

Gas catalytic heaters from the cylinder appeared recently on the market. However, ease of use and a high level of safety and environmental protection, quickly made them popular not Only among outdoor enthusiasts, but also among those who simply want to qualitatively warm his country house or garage. Such devices have high performance, affordable price, and are ideal for use in virtually any environment.