Panels with simulated beams on the ceiling
Almost suitable for any room interior imitation timber. Photos of rooms, lined on the design project this important acknowledgment. Cons in this material are practically no. They can only be in violation of the manufacturing process by unscrupulous manufacturers. Poor quality bar rather quickly crack. To avoid problems in the future, you need to carefully consider the choice of wood products.
Installation of the simulation beam does not require special skills
Inner trim imitation lumber. photo options
Imitation of beam allows finishing of premises in a short time. Each variant differs panels along the length, width, material of manufacture.
Related article:
Finishing a wooden house inside. Photos of the original interiors.beautiful photo finishes in interior rooms. Subtleties, nuances, and the basic rules of walls, ceiling and floor.
The variety and color of the wood
Selection of colors for the walls is almost the first place among the criteria for choosing the simulation. Each wood species has its unique structure, and tint. For example, plates pine simulation can be sand color, but there are also some delicate shades of pink with a slight admixture of yellowness. These colors are ideal for use in general-purpose rooms: living rooms, dining rooms,
Dimensions of timber imitation panels
Darkest considered cedar imitation. Cedar one of rock, which in addition to the hue and pleasant texture has more beautiful and antibacterial properties. Cedar panels have a gentle pleasant smell, but it is not necessary to use them in the bedrooms, it can lead to frequent headaches. Pretty impressive and richly looks like a variant of internal furnish imitation timber. Photos of interiors show the beauty and nobility of this tree species.
Interior with simulated timber - beautiful and practical
In cold rooms and rooms with high humidity, which often falls condensate, it is best to use Karelian or angora larch. Gentle, pleasant shade from pale beige to light yellow helps make the room lighter and visually more. Larch is resistant to moisture, but it has one small disadvantage: the processing of rocks due to the stiffness is very difficult to produce polishing and eliminate fine burrs. Due to high thermal insulation properties (by approximately 25% compared to other species), the simulation of larch used for finishing baths, saunas or baths.
Beam imitation in the interior looks noble
It looks good long fiber fir imitation. But it also has disadvantages. We ate quite a low resistance to decay, so it is not really suitable for use in rooms that can be expected to be wet and requires frequent antifungal treatment.
Panel with an imitation bar made of valuable wood
Larch rocks to simulate used much less frequently. For this purpose, oak, linden or alder. High quality and durable oak wood although it is expensive, but will last for many years of his master. For a bath can take phony imitation, and in finishing children's rooms worth trying such a breed as alder. She has a soft reddish hue, and handle it quite easily. Despite its softness, this breed is very resistant to external influences, abrasion or cracking.
The ceilings and walls of the bedroom are decorated with the help of the simulation beam
How to calculate the material
For ease of calculation of the amount of material should first prepare a detailed layout of each simulation beam. Interior finishing, a photo which shows lower horizontally produced, so for an accurate calculation required to measure the width of the room and know one panel thickness. The length of one plate should be approximately equal to the width of the room, so that when the finishing remained less waste.
Imitation of beam in the hallway
Simulating beam panels can be different and in width. This number may be up to 100 cm. But even the most narrow plates visually different from the usual lining, creating a unique effect timbered masonry. After selecting the start material for interior decoration imitation lumber. Photo of some stages are given below.
Beam imitation on the walls and ceiling It creates a unique comfort of a wooden house
Useful advice! Often, when a large width of the wall of the vertical line of the joints. To avoid this, the panel should be located in a checkerboard pattern.
Installation of the simulation beam
If you plan to simulate the installation indoors, the laid a layer of insulation not worth it. Insulation must be outdoors. To finish with your hands will need:
- metal profiles or bars the size of 25x25 mm;
- screws or other fasteners;
- vapor barrier film;
- sander with fine nozzle;
- Any means for surface coating.
Ceiling with wooden beams imitation
Useful advice! Before starting the lining material must stand at least 2 days at room temperature. It is necessary that imitation is not warped and cracked after installation.
Wall covering
Before finishing the walls should be cleaned from dust, dirt and debris. If the installation is in wooden house, They should pre-treated with a special antiseptic, to avoid the appearance of insects and harmful fungi and molds. After impregnation must pass 24 hours and you can start the installation of the simulation beam.
kitchen apron Decorated imitation timber
First, attach to the wall vapor barrier, This is done using a special staple gun. The film keeps the smooth side of the wall. In this heat it remains inside the room, and the air circulation is not limited thereto. To a concrete or brick wall insulation film attached with battens.
Imitation of timber in the bedroom
In horizontal lath panels must be secured vertically, starting from the bottom with a pitch of 60-70 cm. The step size can be varied by using different kinds of wood. For light pine species can be increased to 80 cm, and for heavy it must be considerably less. If the attachment is made on a wooden wall, you need to use screws, if on a concrete or brick, then fit dowels. To the wall after the finish was smooth, lathing is performed on the level.
Imitation of timber in the bathroom
In those places, where planned to place furniture or appliances must be provided under the lining bars for easy wall mounting. The finished crate makes installation simulation. You should start from the floor, rising to the ceiling. The first panel is put on a level and secure the special fasteners, called klyaymerami. If not, fit the screws, but zasverlivat them better at an angle of 45º.
Imitation beams on the ceiling in the bedroom
Facing the ceiling
For finishing the ceiling is recommended to equip the crate with a reduced pitch. It should be about 40-60 cm. Lath or profile in a length from the window. Laying simulation also best done from the outer wall, so the seams less conspicuous. For finishing the ceiling is best to use a thin plate and a light to visually increase the height of ceilings.
Harmonious and appropriate timber imitation looks in the attic room
On completion of the cladding, it is necessary to cover the protective compounds intended for interior use. Next, the polishing to clear imitation of unnecessary roughness and burrs. Thereafter, surface ground and covered with paint formulations. For best results, after drying the varnish applied to the second layer.
Useful advice! There imitating timber panels painted advance. The price of such products is slightly higher, but do not have to mess around with paint or varnish.
