Part of the kitchen wall is framed by a moisture-resistant clinker bricks
That is, ceramic tiles can be used for decoration with a wet climate (baths and kitchens), balconies loggiasAnd other premises with complex microclimatic conditions. Also a pretty big popularity of this material due to the possibility of laying it on almost any grounds. tiles It can be mounted on the concrete, gypsum board, or even metal.
Lined with ceramic tiles wall at the head of the bed in the bedroom
Production technology
All positive qualities of this material is provided during manufacture. clay - environmentally friendly natural raw material used for the production of clinker. It is produced in special pits, which are in several countries. tile manufacturing technology is very similar to the brick production equipment. For this purpose, roasting at high temperatures.
Clinker is perfectly combined with natural wood
There are only two methods of production. The first involves the firing of the molded article after the pre-drying. it is not necessary for the second drying. Thus, it can receive the finishing material with low thermal conductivity. The entire burning process takes about 2 days. Temperature conditions of this stage of about 1200 degrees. Because of this clinker bricks obtained strong.
The wall near the wood-burning stove which is lined with ceramic tiles
Paving tiles for interior walls: types
Paving tile manufactured for various purposes. Depending on the finishing options, there are several varieties:
- Technical tiles - used for arrangement of roads and sidewalks;
- water-resistant tiles - is applied at facing home indoor pools, baths and saunas;
- Facing a common - used for finishing the various parts of the buildings;
- special molds for complex architectural plans.
Examples of stylistic solutions and design of clinker
Simple Facing clinker tiles for interior wall decoration introduced to the market a variety of textural solutions and colors. The color of the material is created with natural dyes, so the tile is considered safe. Its release is most often in brown and red and white and yellow shades.
Related article:
Finishes the attic with his own hands, photo and design. How to make a self-decoration and insulation of attic space in various ways.
the tile surface is smooth and uneven. Slightly rough top layer resembles a wild stone and smooth - a noble brick. That is why such material is widely used in interior solutions. They can decorate the floors, stairs, walls, or parts thereof, as well as create a unique indoor decor items.
Working kitchen area is decorated with ceramic tiles cladding
How to choose ceramic tiles?
By purchasing ceramic tiles for interior walls, you need to pre-calculate the area to be relined. For waste need to add about 10% of the total area. Taking the package with ceramic tiles, should carefully examine each. They should not be a product radically different in color and in texture. If the finish is not planned right after the purchase, the tile must be protected from dust.
Interior decoration in the loft is complete without the use of clinker bricks
Adhesive for clinker need to purchase immediately. Typically, adhesive tiles brand recommended by the manufacturer. Information about the rules dilution compositions are usually specified by the manufacturer. It is not necessary to retreat from these figures, then the tile will stay much stronger.
White clinker tiles in the design of one of the walls of the living room
surface preparation
To make a correct laying ceramic tiles for interior walls, it takes into account some of the subtleties. Because of this, even a novice tiler-stacker can easily cope with this task. Basis for the clinker must be smooth, durable, and also pre-purified from the old coating. On the wall to be the finish, there should be no paint pieces, lime and grease. Also, the surface should be checked building level.
A wall lined with clinker bricks, does not require additional decoration
Useful advice!All departed plaster must be carefully removed. If required, it is necessary to put another layer of plaster or remove irregularities in using putty.
Also, before installing the tiles should be primed wall. This will help to stabilize the surface and significantly increase the adhesion of the adhesive and substrate. Before laying, it has to calculate the location of the tiles, because the height of the room is not always possible to glue the whole quantity of products. Trimmed pieces are best placed on the ceiling.
Practical and elegant at the same time a decision - design kitchen apron ceramic tiles
Preparation of adhesive composition
For gluing ceramic tiles for interior walls are usually used dry formulations. Purchased mixture was poured into water and thoroughly stirred. For these purposes it is better to use a drill, wearing her special nozzle - mixer. The resulting solution is allowed to brew for about a quarter of an hour to completely dissolve all the components.
Flammability clinker is indispensable in the decoration of architectural elements like a fireplace
The area of application of the adhesive composition on the substrate should not exceed 1x1 m. Adhesive characteristics in such compositions are stored no more than 25-30 minutes, during which time you need to get prepared okleit section.
Useful advice!For interior walls with clinker bricks is not necessary to use glue with reinforced fixing. Suitable elastic, water-resistant to normal fixation.
Decorative brick walls are not afraid of moisture, making it easier to care for them
Installation of ceramic tiles
Glue is applied to the base using a special trowel. Tile firmly press down to the surface and good rap with a rubber mallet until it becomes on the level. Between adjacent elements necessary to sustain a small gap. It can be provided by means of crosses made of plastic.
Useful advice!If the solution is still dried up on the surface, it must be carefully removed and put a new layer.
Paving tile may have a glossy or matt surface
Grout joints made about a day after the finish. Through this time the clinker is firmly connected to the surface and producing grout, it is impossible to damage the surface finish. For similar works using special trowelling compounds and tools. Suitable rubber spatula or trowel with a rubber band. Remains of grout from the tile surface clean hard abrasive sponges.
Popular form clinker with artificially aged surface
Clinker tiles in the interior
Typically, such a material is used in the interior to simulate a real masonry. This design method is considered the most versatile. Quite often clinker trim fireplaces, Space around the window and door openings. Wide variety of colors allows you to choose the perfect shade that will suit to the color scheme of the room. Most often, an imitation of brickwork used in such styles as the high-tech, minimalism, Provence.
An example of using the glossy ceramic tiles in the interior of the living room
It does not matter, finish the wall is fully clinker or any part of it, you can create the inimitable style of the room. Such elements like brick imitation of the guests and all members of the family.
