Poured floors are perfect for living rooms and dining rooms
Useful advice!As many owners, everything for rough bases under laminate or linoleum quite suitable self-leveling floor of the cement mixture. He will fulfill his destiny, having a much lower cost.
Each of these types has its pros and cons. Reviews owners self-leveling floors, with all its contradictions, converge to some undisputed facts.
Self-leveling floors with geometric patterns
Pros and cons of self-leveling floors: reviews of the owners
If you compile all comments owners self-leveling floors, then following their benefits are:
- a great wear resistance and low susceptibility to shocks. If he put heavy furniture or drop something massive, nothing happens with the self-leveling floor;
- long service. In addition to the remarkable appearance, decorative floor fillers delight its practicality;
Self-leveling floors in the bathroom
Separately, it may be noted, according to reviews of the owners of bulk floors, the pros and cons of each type of self-leveling compounds.
Thus, the advantage is that metimetakrilatnye mixture rapidly polymerized and may be stacked even at low ambient temperatures. At the same time there is a minus. It takes them a quick and professional installation due to instant hardening, as well as the ventilation of the room because of the noxious fumes.
Self-leveling floor looks good in the interior
Advantages of epoxy compounds in their chemical resistance and the possibility of creating a decorative layer. The disadvantage is poor elasticity, which makes it impossible to use them in places where impact force and other forms of distortion.
Polyurethane compounds have wear resistance, durability and ease - is plus. However, the floor of such blends is difficult to mount, due to the need for careful alignment of the base and the presence of small humidity - write a minus sign.
For self-leveling floors are easy to care and keep it clean
Advantages of cementitious compositions are: good adhesion with a base, imposing coating thickness which can be up to 12 mm. This floor is not slippery. In this case, it is quite time-consuming to install, which can be attributed to the disadvantages.
Useful advice! Experienced builders believe that pouring self-leveling floor Use at least two people. This is necessary not just for the convenience, but also to avoid the drying of the mixture. After all, it takes only 20 minutes.
Cast flooring in the nursery
The process of pouring self-leveling floor consumption per 1 sq. m
To avoid the high cost of 1 sq. m. The inlet floor, must prepare a base. As a general rule, no special action is required to carry out here. It is enough to thoroughly clean the dust and dirt, putty large potholes and cracks. For better adhesion can be coated with a primer layer. If the surface is smooth, the primer added quartz chips or other similar material.
Self-leveling floor with volumetric 3D-picture
Then you need to get acquainted with the instructions for the preparation of the mixture and make a batch right on it. It is important to assess your strength, as the mixture dries quickly. Therefore, its amount should be small. Stirring of the solution is carried out with the help of the construction of the mixer or drill with a paddle in the bucket, as long as it does not become a homogeneous mass, like in consistency and color.
Self-leveling floor - a practical and durable coating
When ready, the mixture was poured into a corner room, with a roller. Under the influence of gravity it spreads a thin layer on the premises. As the alignment of the mixture is added until the whole room is filled layer of desired thickness.
Related article:
Leveling the floor self-leveling compounds: process technology. Types mixtures self-leveling floor tools. Alignment of wooden floors.
The mixture is then rolled with a special roller needles, which allows to remove air from the interior of the inlet floor. After a floor has hardened, apply a finishing layer. He may simply be protective, but it happens and decorative, with different patterns and texture. Many of the compositions do not require applying a protective layer, as these components are already available in the mixture.
The self-leveling floor can add various color dyes
Useful advice!Dilution mixture should be clearly proportioning with water. If it is more than necessary, the floor may crack. Minimal amount of water will not mix freely spread across the surface.
In the opinion of the owners of the pros and cons of self-leveling floors do not prevent them becoming more common. It deals more with decorative coatings. However, they require some care and proper use. This will allow for a long time to enjoy a modern underfloor design solutions.
With leveling floors can create a perfectly flat and smooth surface
- Need 5 days after pouring the floor of the inlet with a decorative coating applied to it a protective film in several layers.
- Wet cleaning must be carried out by any known method.
- During the general cleaning, which should be conducted at least once every six months, clean the cover you need with detergents.
Proper operation of the device and the self-leveling floor create comfort in the living room, and on industrial and commercial sites let you seamlessly enjoy long lasting and durable floor.
