Fences made of metal sheets: photo and video instruction for installation

Dimensions for corrugated fences

Before proceeding to the installation of a fence of corrugated board with their own hands, should be familiar with the classification of the material, its basic properties, methods of fixing and other nuances. Knowing the basic dimensions of corrugated sheets for the fence can properly design a structure to make accurate calculation of the required elements and to reduce the excess material to a minimum. Such an approach will ultimately have a positive impact on the cost of the entire structure.

Marking steel sheet is carried out on the following parameters: thickness of metal, the wave height (fins) and a step wave. Given these characteristics, there are three groups of material:

• Mark S - used for installation of walls, partitions and fences;
• Brand H - used in the construction of load-bearing elements, as well as to strengthen them;
• Brand NA - versatile material for roofing, finishing floors and walls.

Corrugated sheet made from roll material with a width 0,98-1,85 m. What is profiled on the fences is better? Give preference to the material, which will provide the necessary rigidity of the fence design and at the same time will not be too expensive for the price. Excessive thickness of the sheet will not damage the construction, transportation and installation but will be more difficult. The most suitable for erecting fences steel sheet has a thickness of 0.5-0.8 mm, a rib height from 8 to 20 mm.

Related article:

Fences made of tree: photo designs with a modern edge. Types of wooden fences. Fences made of tree: Photo of beautiful buildings. Wooden fence, the fence of the planks. Metal poles for fences.

Decide how best to choose decking for the fences take into account the wind load in your area and for sound insulation requirements. If the house territory borders the roadway, choose metal material with a thickness of 0.8 mm. For example, the shaped sheet of the brand C20 perfectly cope with shumopgoloscheniem.

Table 1. The dimensions of some grades running sheeting used for fences:

Brand Profile	The main parameters of the sheets of corrugated board
Full width sheet, mm	sheet width Working mm	The thickness of the sheet, mm	The wave height, mm	Step wave mm	Weight 1 PM, kg
C8	1200	1150	0,4–0,8	8	62,5	4,4–8,4
C10	1155	1100	0,4–0,8	10	45	5,6–6,5
C20	1150	1100	0,45–0,7	20	137,5	4,3–7,4

Useful advice!By purchasing corrugated board with color coating, do not forget to buy a can of paint identical to the processing of random scratches and damage during installation.

Price per sheet of corrugated board for the fence

Although the steel sheet has high strength, corrosion resistance, temperature extremes, it is quite affordable building material. Everyone can afford to buy a profiled for the fence. Prices per sheet from different manufacturers may vary, so you should carefully review the products and prices on the relevant sites.

The cost depends on the corrugated sheet thickness profile, the type and size coatings. Rates for taking metal sheets for the sheet can be determined, taking as a basis the value of 1 m² of the material.

Table 2. Prices for corrugated board fences, which uses sheets of 2 m length with a polymeric protective coating:

Mark trapezoidal sheet	Price, rubles
unit of measurement	Sheet thickness, mm
0,4	0,45	0,5	0,7	0,8
C8	m²	190	205	220	280	330
sheet	455	485	526	675	685
C10	m²	200	215	215	298
sheet	454	486	486	673
C21	m²	217	230	249	319	370
sheet	452	484	526	671	784

Table 3. Price corrugated galvanized coating:

Mark trapezoidal sheet	Price, rubles
unit of measurement	Sheet thickness, mm
0,4	0,45	0,5	0,7	0,8
C8	m²	152	163	171	217	247
sheet	363	390	410	520	592
C10	m²	160	172	180	230
sheet	364	390	409	520
C21	m²	174	187	195	248	282
sheet	364	389	408	520	592

Useful advice!Acquiring profiled, require information about the thickness of the sheet, since sellers often silent about this, but this parameter is very important for fence construction.

To determine how many there are fences made of corrugated board, you must know the value of all the design components: racks, horizontal rails, fasteners and other items. To supporting pillars used metal tubes of square or circular cross section with a wall thickness of 4 to 8 mm.

Table 4. Approximate prices pillars for a fence of corrugated board:

Metal Post for fence circular cross-section, mm	The wall thickness, mm	column length, m	Cost, rub.
48	4	2	316
2,5	395
3	474
60	5	2	364
2,5	455
3	546
73	5,5	2	416
2,5	520
3	624
89	6,5	2	772
2,5	965
3	1158

Metal Post for fence 60x60 mm made of a shaped tube with a length of 3 m and a stub welded to the plates fixing will cost 600 rubles., the cost of galvanized column of the same length of rectangular section 62h55 mm reach 730 rubles. a piece. What pipe used for a fence of corrugated board? For racks commonly used pipe 60x60 mm or 40x40 mm, gate supports and the gate - 80x80 mm.

Refer to the manufacturer, order parts and materials for self-assembly. Check the directions on the device design, watching the video installation of the fence of corrugated board with his own hands. You can apply for the installation of fences turnkey. Photos, prices fences of corrugated board with the installation are available in the relevant sections of the company's website. There's also help you to calculate the in-line mode, the approximate cost of construction.

Installation of a fence from metal sheets with their own hands

Available on the network Numerous photos of corrugated fences with their own hands confirm that these protections aesthetically attractive, may have different colors and designs. Sufficiently low cost design is performed in a continuous web of the profiled sheet. fences with brick pillars look solid, but they are more expensive for the price.

Tools and equipment for assembly

That at the crucial moment did not have to suspend work, prepare in advance a set of necessary tools for installation and equipment. For installation fence need:

• roulette, building cable, pins - all these will need to mark up;

From materials other than corrugated board, pipe supports and for lag should prepare sand, gravel, cement for concreting pillars. It is useful to have available primer and paint for the treatment of metal surfaces.

Build fences of corrugated board with his own hands: video materials recommendation

How to make a fence of corrugated? Start with the construction site preparation. perimeter line is cleaned of vegetation and debris. Next, a layout. To do this, the perimeter corners hammered pegs and between the pull cord construction. Next proceed to the selection of the distance between the posts of the fence of corrugated board are usually a step between the supports of 2-2.5 m, and sometimes 3 m.

At this stage, fixed placement the gate and the input gate. What poles needed for fences of corrugated board? Traditionally, pedestals use a metal profile pipes of rectangular or square section. Its size is selected depending on the height of the fence and is 60x60 or 40x60 (mm). Some used round tubes, but harder for them to fix horizontal guides.

Useful advice!Do not use metal pipes with a wall thickness of less than 2 mm for supporting pillars. This will negatively affect the strength of the structure.

How to install poles for fences of corrugated board

Installation of the fence posts to produce corrugated several ways. If you plan to fence of solid trapezoidal sheet for supports dug pits, the bottom of which the roofing material veiled. The depth of the pits is from 0.9 m to 1.2 m. Place the column into a hole, the space around it is filled with gravel, is well tamped, moisturize and concreted.

If the construction of the future presupposes brick pillars, it must be the device strip foundation under the fence of corrugated board with his own hands. For this excavated trench depth of 0.7 m and a width of about 20 cm, is set formwork height of 10-15 cm, prepares a frame made of reinforcement bars. Further, a frame in the trench, in targeted areas set poles and concrete is poured a solution.

Before setting solution check the verticality of the installation of each column. In addition, it is necessary that the height of each tower was divided evenly. This can be achieved by making a mark on each rack corresponding to the ground level. Verify the installation, you can use the construction cord stretched along the top edge of the pillars.

Useful advice!When concreting pillars for a fence of corrugated board is necessary to ensure that they were all in the same plane.

For the setting of the solution is kept for 4-5 days. Then it is necessary to weld the metal rack console (mortgages), which will later be mounted rails. Filling is fixed at a distance of 20 cm from the upper and lower column region. You can then obkladyvat metal brick supports.

If the fence will have a design with brick pillars without the cap, there is no need to arrange the tape base. Here it suffices to apply the local base unit for each brick pillar. Pit dug to a depth of about 1 m with a size slightly larger side brick column.

Video construction of a fence of corrugated board with your hands will help to understand the intricacies of installation.

How to put a fence of corrugated board with his own hands

As soon will be installed all the support legs can be fastened to the cross lag. The use as guide profile pipes with a smaller cross section than the support-poles. Typically used pipe section 20x40 mm or 20x20 mm. For fencing in height and 2.5 m is enough two rows spaced 1.5 m apart.

How to make a fence of corrugated board with your hands? After the construction of the frame is completely assembled, proceed to its trapezoidal sheet cladding. It is fixed by means of special screws, cap which is covered by the polymeric composition of the corresponding color. Such hardware fasteners make the place almost unnoticed. Before plating is recommended to make a hole in the ground anchorage.

Useful advice!Screws must be screwed exactly perpendicular to the places where the edges tightly adjacent to the carcass.

Sheets of corrugated board joined overlapping, wherein a wave plate with a lower edge of the wave should be covered with a larger edge. The distance between the bindings taken to choose two equal waves profiled sheet.

Fences made of corrugated board are strong and durable. Due to the wide range of colors, you can choose any color of the material and shape of the profile. He perfectly combined with stone, brick, metal and can support the style of existing buildings in the yard. Having studied the useful tips and video footages installation of fences made of corrugated board can easily install yourself a modern, reliable and, most importantly, inexpensive fence.