Ways to remove old shpaklevku from walls and ceiling

Not so terrible repair, as preparation for it - this phrase is known to everyone who at least once in my life encountered repair work in the premises. Indeed, it is the preparation for full-scale repair that takes the most time and effort. One of the most unpleasant and dusty preparatory stages is the removal of putty. Today we will tell you about the simplest and most common way to remove old shpaklevku from the walls, as well as what tools are needed for these works.

Do I need to remove the old shpaklevku?

Before proceeding directly to the very dismantling, make sure that the old layer really needs it. Do not always need a complete dismantling. Perhaps you will manage local replacement of problem areas. If the old surface is crumbling before your eyes at the slightest touch, not to mention tapping the hammer, then local works can not be dispensed with. In this case, you need to resort to a larger operation to remove the old paint from the wall.

How to remove the putty

Removal tools

Make sure you have the tools you need before removing the putty from the wall. It is necessary to prepare:

• spatula;
• Chisel;
• Hammer.

If this set does not help, how to remove the old layer, you may need more heavy electrical equipment:

• punch;
• vibrating machine
• Bulgarian.

For the puncher, you will also need special nozzles in the form of a blade or a spade. When working with a Bulgarian special diamond discs are used.

The process of removing the putty from the walls

Before starting to decide how to remove the old putty from the wall, it is necessary to prepare for work. We have already noted that this stage of repair is characterized by a large amount of dirt and dust. Therefore, if there is any home appliances, furniture, etc. in the room.- all this must be taken out, the floor covered with polyethylene or other consumable material. To prevent dust from entering adjacent rooms, all gaps should be covered with damp rags.

Widget from SocialMart

If using a light tool, spatula or scraper, the layer can not be dismantled, it is necessary to treat the surface with a special solution. It is prepared very easily. For 1 liter of water, add 2 tablespoons water.starch. Then the contents are mixed and applied to the old filler with a spray gun. If it is not available, you can use a roller or brush, but it will take more time. After 15-20 minutes, the wall will become loose. Now it needs to be treated with a spatula. If the base is weak, then you will need an article on how to remove plaster from the wall.

When to use heavy equipment to remove the old layer?

If the above method does not help, it means that the old layer of putty is very thick and then you will need to take a punch. When working with this tool, the bumper mode is set, and the previously mentioned peak or blade is taken as the nozzle. The perforator will need to walk through the entire wall, crushing the surface by sectors. You can perform work in stages, knocking the sector behind the sector and gradually cleaning the shattered area.

Professional brigades performing similar works use a Bulgarian with special diamond discs. The process of dismantling in this case is significantly accelerated. But this method has its own drawback - when working with a Bulgarian, the layer of putty is worn gradually, not by layers. Accordingly, the process of grinding is accompanied by a huge amount of dust. When using this equipment use a vacuum cleaner, as well as wear a respirator and safety glasses for safety.

Removing the old layer from the ceiling

How to remove the putty from the ceiling?- a question that also has great popularity when carrying out repairs. In fact, the solution is much more difficult. After all, here you are unlikely to cope with a perforator or a grinding machine - it is very difficult to keep such heavy equipment in a vertical position. If you have such a problem, it is best to resort to a method of wetting. And in order to make your work as simple as possible, use a spray gun or a standard vacuum cleaner, turning it on in the reverse traction mode.