Border wallpaper Tips for selecting and placing edging on the walls

Wallpaper border (or frieze, edge, edging, curb tape) - it is made from a variety of a small width of the strip material, which is glued on top of the wallpaper or in their places of interfacing with other materials. Choose the right fringing is not too difficult. In this article for details about what to consider and what the nuances necessary to pay attention before you buy wallpaper border.

Options for combination of wallpaper and decorative borders

Often, when you buy wallpaper in addition to the main finishing materials it proposed to acquire such an element of decor as curbs. This product allows you to complement the appearance of the premises, highlight important details of design, adjust the visual size of the interior space, hide the error finishes set the boundaries in the field connections with other materials.

Virtually any specialty store selling wallpaper have catalogs curb tape. The buyer can pick it up yourself from the proposed range. However, many manufacturers have greatly simplify the task of choosing, giving complete with a model of wallpaper one or more embodiments of curbs.

As a rule, the firm-manufacturer offers the combination of two options: either the color of the pattern. For example, a green light-colored wallpaper with floral ornaments perfectly with white or dark colors green border with the same design or not. In the case of monotonous coverage should opt for the frieze of similar hue with any print. This addition will enrich the design space and make it more elegant and attractive.

Useful advice!In one collection you can find wallpaper and border strip with a different pattern. Such a combination may not look good in a small room, too saturating exterior walls and attracting too much attention to them.

Another embodiment of the producers are wallpaper borders and with the same image. For example, the first feature large geometric shapes and edging - identical in terms of color and shape, but smaller. It should also be borne in mind that the coating of the walls should be combined not only with a frieze, but also with other design elements.

With regard to the choice of colors is necessary to say a few words, it is very variegated ribbon is appropriate only in areas where the bet is on the wall. However, even cabinets and other elements do not plan to hang the furniture. However, there is one type of rooms, where the use of bright colors is justified - children.

When the child reaches the age of reason, caring parents often want to paste over wallpaper his room of the subjects that interest him at the moment. This is a major mistake, as enthusiasm of the young offspring usually change very quickly. It is much better to choose fillets tape "of interest." Replace it will be much easier, cheaper and faster than a fully-stick coating everything in the nursery.

Themselves walls are executed in a positive neutral color. It is worth to remember that too bright and provocative premise can cause anxiety in children.

The choice of material execution curb tape wallpaper

There are several options for the manufacture of a decorative frieze.

Paper for wallpaper border. This option is exposed to UV rays, pigment fading and mechanical damage during harvest. This framing of repair can be used if the anticipated relatively frequent changes in the interior premises. The main advantage - easy removal and pasting. All of this should be taken into consideration before buying paper for the wallpaper border.

vinyl frame. It is more practical, durable, stable, less prone to fading, easy to clean with a wet cleaning. Vinyl tape is well suited to a hallway, kitchen, bathroom and other places with high pollution.

acrylic edge. It includes all the advantages of vinyl, but has a lower cost due to the use of acrylic emulsion there.

textile edge. It has a two-layer structure of the paper and fabric, thereby achieving higher density and strength of the coating.

How to arrange on the wall for wallpaper border

It should be noted immediately that never edging glued on the center of the wall. Otherwise, the room becomes visually below. Considered an ideal location on the 1/3 of the height from the floor. In this case, the strip becomes the interface between different types of wallpaper. One of the classic examples of a combination of a "striped wallpaper - edge - patterned wallpaper." The selection can be made in favor of plain wallpaper, while the lighter are glued at the top, and dark - at the bottom.

The above described embodiment of a frame arrangement is particularly relevant when pasting dishes. The main factor here is the practicality. Often more expensive cover is glued at the top of the wall, and special washable wallpaper and vinyl or acrylic edging close the workspace.

The most common location for a decorative border of wallpaper on the ceiling. In this case, it is partially replaces the ceiling moldings. It is necessary to take into account that the pasting of the frieze at the top of the wall is recommended to select only large spacious rooms. It enhances the beauty of the ceiling, making the room more comfortable and cozy, it adjusts the size of the visual.

Useful advice! ABOUTfor manipulation of wallpaper can be adhered vertically. It allows you to visually select a specific section of the wall, or functional area. You can okantovyvat doors, mirrors, furniture, etc.

Very rarely curb tape wallpaper is located at the bottom near the floor. This technique can be used if an error was made in the measurement of the height of the wall and the wallpaper after cutting were short. Also, there are cases where low-quality material shrinks upon drying.

Related article:

Wallpapers for walls: actual photo catalog and stylish options

Types of wallpaper. How to choose wallpaper for the rooms of the apartment: living room, bedroom, nursery. Wallpapers for walls: a catalog of photos and the prices of different types of wallpaper.

Also, tape is glued to the ceiling and, as a mirror image, just below them on the walls. This arrangement corrects the visual size of the premises and its appearance.

Tips for preparation and application for wallpaper border

When pasting wallpaper absorb moisture and become more susceptible to mechanical stress and pollution. Therefore, you should let them dry thoroughly and only then proceed to spray wallpaper border. The drier the surface, the better the adhesion of the two materials after application.

Curb glue rather quickly polymerizes (dries). Therefore, the process of pasting on the steps to be divided without much experience. This avoids situations where the plastered edge dried up and became unusable. Also should make sure beforehand that you have all the necessary tools.

On some wallpaper has a pattern with horizontal guide by which to navigate. The lack of parallels between the framing and the walls of the main pattern can be very noticeable and negative effect on the visual perception of design.

Pieces when cutting to do a little bit longer, which will match the image. This is true for borders with the figure.

It is necessary to carefully check the surface of the walls, which will be located on the tape. Any irregularities sooner or later will be shown due to the execution of a thin material. It is necessary to cover all the bumps, cracks, remove any loose paint or glue.

When using the self-adhesive wallpaper border should not rely solely on its quality. Over time, it may start to fall off. It is therefore much more appropriate for the extra to grease the surface with adhesive, than to solve the problems in the future.

Sometimes the border for wallpaper is glued back to back with the primary coating. This is true for species with advanced or high relief (embossed wallpaper bilayer or with an additional layer of foamed vinyl). In this case, the normal wallpaper paste.

The necessary tools for drawing a border wall

For stick frieze need the following tools.

Level. It is very important to follow strictly the horizontal position of the rim, which allows to combine perfectly the curb along the perimeter of the room and did not spoil the appearance of the interior.

Roller for smoothing. Used for pasture bubbles and excess glue. This tool can be replaced with a plastic spatula or a soft sponge. However, the movie has an advantage: the likelihood of bias when ironing curb tape wallpaper minimal.

Knife for cutting. It is recommended to use a writing knife and a ruler that allows you to more accurately cut the ribbon on the planned lines. He also needed when combining the patterns and cutting the excess.

Brush. The surface on which is glued a frieze, must be as clean as possible. Soft brush will help get rid of the dust immediately before pasting.

A sponge or absorbent cloth. It is necessary to remove the excess glue from the wall. The cloth should be lint. It is best to use natural white linen or cotton cloth to dye cloth, not smeared coating when wet.

Roller for glue. It may be replaced with a conventional paint brush. Note, however, that can deliver a lot of inconvenience and slow down when pasting pile. If pasting involved one person - it will be difficult to simultaneously hold plastered frieze and at the same time get rid of the adhered debris.

wallpaper paste. When selecting an adhesive it makes sense to consult further with the seller at the time of purchase, indicating the material execution of the frieze and on what surface it should be applied.

Stepladder or desk. If you plan to place a border on the wall at the top, then the work will require a ladder or sturdy table that can withstand the weight of a person. Must be removed in advance any obstacles moving along the perimeter of the objects of the room. This will also reduce the likelihood of additional injuries after falling from a height.

Desktop. Needs to accommodate the tape at namazyvanii. The working surface must be thoroughly cleaned of dirt and can be laid out with plastic wrap to avoid any contamination during operation.

The process of gluing a decorative border for wallpaper

Before proceeding to the main operations, once again, make sure that you have all the necessary tools and materials. Remove all unnecessary items from the room, or protect them from accidental contamination, which is located a working surface.

glue preparation. It is strongly recommended to carefully examine the manufacturer's instructions, as some adhesive mixtures are bred outside the box. As a general rule, the dry mixture was placed in a container of water and slowly stirred. Subsequent infusion process takes approximately 20 minutes. After this time, the adhesive re-mixed until smooth without lumps.

In the case of the kneaded mass of acrylic adhesives, mixing with water is not required. Such material can be used directly. It should be noted that due to the acrylic basis is ensured the perfect coupling with the surface.

Note!Incorrect preparation of the adhesive in a subsequent impact on the decorative features for wallpaper border. Therefore it is necessary to take this step responsibly. Otherwise, the tape will have to glue.

marking. To Kant was pokleit smoothly, you need to advance a simple pencil mark its location. This greatly speed up and simplify the follow-up and make it a perfect result. Used for marking the level and long range (or other smooth guide for the drawing). The greater the distance between two points during the line, the less likely deviations.

An interesting approach greatly accelerating the process of applying lines is to use the fishing line guide. It is possible to mark a stage arbitrarily long wall. However, this work must be at least three people: two in order to maintain the guide and one - for drawing.

ribbon cutting. This step is very simple, but requires special care. After the surface is marked, made measurements and cut pieces of ribbon curb for wallpaper. If the length is chosen with a small margin - joints alignment process can significantly be simplified. Surpluses can be cut cleanly after placement on the wall.

adhesive Application. Glue fillets on the tape applied with a brush or roller. Oiled edge is left for 5-10 minutes. This time can be used to once again walk on the surface of the wall with a brush and remove the precipitated dust.

Application edging. Border wallpaper neatly located on the wall according to the pre-generated markup. When sticking in the corners, the end of the tape has to grab the next wall. Next strip glued overlapping allowance of 5-10 mm. This avoids gaps. You should not make any sudden movements and strong inflection. Otherwise, the border may tear.

After the application, using a special roller (or net fabric) from the material to expel air bubbles and excess glue. Next, excess glue is removed gently with a cloth or sponge. Once the entire perimeter of the room is processed, sticked on the wall frieze must dry thoroughly. Drying time depends on the selected glue, but often up to 24 hours.

Border wallpaper on the perimeter of the openings

Allocation of the door or window openings decorative ribbon will be spectacular decoration and complement the overall design of the room. The most important difficulty here is that the tape pieces need to be connected at an angle of 45 degrees.

To get a perfect butt, it is necessary to place the vertical and horizontal overlapping bands, one on top of another. Immediately thereafter attach line by line of the future joint (diagonal) and carry a sharp knife, cutting both layers. Next, bend the edges and remove the trim. After this part of the joint back in its original position and carefully smooth, thus removing the excess glue.

The selection and application of the curb on the wall - a simple task that forces even the one who does it the first time. However, we should remember that, in theory, it seems new and original idea - in practice can give far from the expected results. So it makes sense if they do not follow, then at least take into account the well-known rules and recommendations of experts.