Cutting board with their own hands

The labor classes in school, boys had the theme: "Cutting board with their own hands." The guys did cookware, as best they could, and gave mothers of March Eighth. Tablets usually obtained koryavenko, but have been lovingly decorated with simple carved or burnt pattern. Now the boys grew, and many already want to do something more decent to surprise and please his wife. How to make really a good cutting boardThat does not rassohnetsya a couple of months of use, read our article.

Basic Rules

The life of your crafts will depend on the quality of the selected timber. From the budget, but too soft pine reject at once - for the board needs a more dense and water-resistant array that is not offended by the constant washing and do not be afraid knife. It is best to cope with this task:

• Oak;
• Beech;
• Acacia;
• Pear;
• Cherry.

board form may be very different, as the size, but in any case, it should be easy to work with certain types of products. Way to store home-made utensils also should consider immediately. And if you, for example, want to hang it on the hook, so you will need to provide anywhere from the edge or on the arm of an opening large enough.

In the manufacture of boards with a handle, make sure that its axis coincides precisely with the central line of the base web. Otherwise, keep on the weight of bulky object will be hard and uncomfortable.

Simple for beginners

To work needed edged board thickness of at least 20 mm. There better not be stingy and choose the best variety of wood - or Extra Class A, that is, without knots and wormholes. The tool - a standard for self-treatment of wood: jigsaw, drill, grinder, chisel, yews, as well as a pencil and tape measure.

The procedure works:

1. Cut out the paper pattern - it is best to draw it on a piece of folded in half in order to achieve an exact symmetry.
2. According to the pattern to make a markup on prepared whole board.
3. Jigsaw to saw the workpiece along the contour. If you have a complicated design, comprising an arc of small radius, these areas are best cut through by setting a saw for metal - it gives a more accurate line.
4. Billet boards should be thoroughly sanded, using circles of varying granularity. Be sure to chamfering and sanded all the angles.
5. Fully finished product process liquid paraffin, giving it a good soak and dry, repeat this step several times. By the way, do not chase superexpensive mineral oil "specifically for the board." This is the same fluid that is sold in any drugstore, just named differently.
6. When the oil starts to appear on the surface, it must be removed with a dry cloth and leave the board for a day to dry completely.

Splicers and the end of the board for the experienced

Chic look of inlaid board glued slats of different color wood - they are distinguished by beautiful and smooth contrasting stripes. To do this, simply alternating light (birch, maple, ash) and dark types of wood (mahogany, beech, stained oak). Even more complex version, when a block is cut crosswise glued and reassembled in a different order. The result is very impressive, "checkerboard".

But to create such a workpiece and the tool needs more serious:

• Planing or thicknesser;
• Circular saw;
• Panelboard carpentry vajmy or powerful clamp.

All Templates for the end of the board must be carefully aligned on a table saw that they were fitted tightly together. Otherwise, there will be gaps between the slats, and then no glue or clamps can not cope with them.

Procedure for the manufacture of multi-colored shield:

1. Light and dark bars pass through a marking gauge to obtain at the output of the preform of the same width.
2. Place the bars in the cassette-pattern, arranging them as much. To turn every one to his side and spread over the entire surface of the adhesive. For the manufacture of kitchen board of any suitable moisture resistant formulation such as wood, Titebond III Ultimate Kleiberit or-303.2.
3. Return the workpiece to the starting position and fit tightly to each other. Vajmah lock in about a day, until the glue hardens. The tool is better to seal the masking tape, so you do not have courage to scrape it firmly adhering composition.
4. Take the plank out of clips and a chisel to clean the surface, removing any excess glue oozed.

Dialing board can get very massive, and that her mistress was convenient to be controlled better on the sides of a router to choose the deaf pen-slots.

In principle, striped shield is ready and it can be cut from the board kitchen technology described above. But those who want to go to the next level and make a chic "checkerboard", continue to work. Here it is necessary to dissolve the workpiece across the new bars 25-30 mm thick. More of them are going to the next panel of the principle already developed. After drying, grinding, and multiple different abrasives will only handle kitchen board with mineral oil.

(30 estimates mean: 4,90 of 5)

Loading...