Dimensions dining table for different number of people

Knowledge of the mean values ​​that are optimal for its convenient location makes it possible to calculate the size of dinner desktop that fits in the allotted space for it and provide full comfort during leisurely family meals.

Selection of the optimum size

Comfortable posture in which a man sitting at the table, depends on competent selection in the first place, its height, standardized technical regulations. It is usually in the range of 0.7-0.75 m. For most people, this value provides a free space from the knees to the countertop.

For sufficient mobility can use a higher bar counter, performing the role of the section height to 0.9 m.

When choosing the size of the table for a dinette arrangement, it is expedient to take into account a number of factors:

• dining area or dining area kitchen;
• the number of people going for a meal at the same time;
• the preferred form of the table;
• size and location of the rest of the kitchen furniture ..

Roominess is directly proportional to the shape of the countertop, as lack of corners in an oval or a circle lets you use the entire surface, if you set the chairs close to each other. Innovative delights in giving the tables of the most unusual shapes are not always beneficial and cost effective, and sometimes overly cumbersome for visual perception. All kinds of grooves on the tops limit the number of seats in the form of flowers, stars, asymmetric blobs.

standard dimensions

In the production of the tables used by manufacturers established technical standards, so standardized sizes. And at the planning stage of the kitchen of the future solutions of the image can be accurately predict what sizes of dining tables in different shapes are the best option.

Round table

The spacious dining area looks elegant, recalling patriarchal family sketches collection of different generations under the cozy shade for leisurely conversation during dinner. This configuration provides a good overview without highlighting the comfortable seats, creating equal conditions for all. But the large size of the inconvenience that it is difficult to reach the center. If we analyze the standard dimensions expressed by the size of the diameter, the key indicator will be considered as the number of people for whom the product is chosen:

• four (0.9-1.1 m);
• Five-six (1,1-1,35 m);
• seven or eight (1.3-1.8 m).

oval table

Attractive for its unusualness. Rounded lines are not limited to dense placement of the maximum possible number of people, but overly stretched long axis can not put a piece of furniture in small kitchens. Indicators values ​​on average have the following ranges:

• four to six persons: width - 0.9 m, length - 1.4 m;
• seven to eight: width - 0.9 m, length - 1.8 m;
• Nine to ten: width - 0.9 m, length - 2.1 m.

Square table

square form is successful for a small family, has no plans to room at the table for more than four persons for whom such a configuration It is comfortable for communication with the length of each side of 0.9-1.1 m. It should be borne in mind that such a piece of furniture does not fit into the narrow space.

rectangular table

Conservative, familiar desktop configuration to increase its functional role, as in parallel with the customary usage as the main subject dining groupIt can divide the kitchen into two zones. It is easy to pick up options for narrow spaces. Dimensions available to potential consumers, the following figures are presented average length for the same standard width of 0.9 m:

• four: 1.2 m;
• five or six 1.5 m;
• seven or eight: 1.95 m.

Independent calculation of dimensions

Knowledge of an area of ​​standards, attributable to the person sitting at the table makes it possible to independently calculate optimally permissible dimensions tabletops certain form that easily fit in the allotted for it space.

The reference values ​​based on a consumer:

• width: 0.6 m;
• depth: 0.4 m.

In addition, it provides for the presence in the center of the table at least 0.2 m of free space, allowing to place the dishes.

Based on these considerations, the total width of the table is computed:. 0,4 • 2 + 0 2 = 0.8 m Perimeter rectangle will depend on the estimated number of people scheduled for the regular accommodation around the table, for example, if there are six: P = 0.6 • 6 = 3.6 m.

Side of square section is 3.6: 4. = 0.9 m length calculation rectangular analogue, given ideal, calculated above, a width of 0.8 m, giving the following meanings:. (3,6 - 0,8 • 2) / 2 = 1.0 m recommends to add the calculated value even 0.2 m, so a length of 1.2 m.

For round tabletops diameter D = 0,8 m is calculated circumferential length that is divisible by 0.6 m, the result obtained gives the approximate number of people that can comfortably accommodate her family dinner: 3,14 • 0,8 / 0,6 ≈ 4 person.

According to this technique is easy to calculate the ideal diameter of the table for the planned number of people who can sit for it at the same time.

It suffices to multiply 0.6 (average width desired for comfortable location in meters per person) to the predicted number of people (take for example the number of people equal to eight), and the result is divided by the number π ≈ 3,14. 0,6 • 8 / 3,14 ≈ 1,53 m - optimum value of a dining table for eight diameter.

location

Knowledge of the exact size of the kitchen is not only space, but also the future of the dining table, optimally accommodating the desired number of people for daily meals together, it allows the development of a sketch to scale and choose the most efficient place for lunch corner. All the more attractive it becomes to use the space near the window, but in this case strongly oval elongated configuration is not very convenient.

If you still want to avoid sharp angles, it is advisable to choose a dining table on one leg stable, which allows efficient use of the space under the sink.

More comfortable in these situations will be a round table top - transformer, without any special effort makes it a favorite oval.

When choosing a conservative form as a rectangular table should analyze the change in capacity, depending on the installation. For example, if we take the model with the dimensions calculated above 0.8 • 1.2 m, then placing it at the central fit six people, but if the move up the table perpendicular to the wall, you can get around it five.

In the traditional location close to the wall long side, the capacity is reduced to four persons. Save the full potential of usable space square table makes dining an elegant angular placement group.