Kitchen furniture made of plastic: the advantages and disadvantages

When choosing kitchen units are often the question arises about what facades pick up for him. They must not only emphasize the selected style, but also be of high quality material, durable and safe. Currently, the furniture is in high demand with facades made of plastic for food in a contemporary style. The popularity is due to the spectacular and attractive appearance, a variety of colors, textures and finishes, the ability to create interesting combinations. In addition, plastic facades practical and durable, and modern manufacturing techniques make them safe for health.

What is the facade made of plastic?

Plastic facade furniture - a MDF board, pasted over the one hand as a thin plastic sheet. Its surface may be smooth or textured, matte or glossy. The plastic surface is produced by treating special blanks of paper under a high pressure and temperature. During the processing of paper impregnated with special absorbent materials. Absorbing resin, it becomes a durable multi-layer plastic.

MDF seal plate and plastic sheet by using PVA adhesive. To do this uniformly distribute the glue roller or brush over the entire surface and dry parts by molding. Such a method ensures a firm and reliable grip.

Types of plastic edges for facades

To facade looked neat and complete, it should be to frame a special edge, which exists in several forms:

• PVC edge. The most economical form of edging. It's easy to mount on the front due to the high ductility. A significant drawback is the rapid wear and possible deformation of the operation of the facade, which is why the appearance of kitchen furniture can greatly suffer.
• The edge of the acrylic. More durable type of edge, but quite rare and expensive in comparison with PVC tape. But it has a facade with an attractive appearance, particularly if the edge is made of a transparent acrylic.
• Aluminum frame. The most common type of edging kitchen facade. Furniture looks stylish and modern, and thanks to the aluminum frame facade is characterized by reliability and durability. The frame profile has several variants, with different sizes, thickness and appearance. The impression from the kitchen and from its functionality will always be positive. In addition, this facade can be done independently.

Advantages and disadvantages of facades made of plastic

As with any other kind of kitchen fronts, plastic plates have their positive and negative qualities. When choosing their kitchen need to consider all the important points to avoid problems later.

pros

• Visual appeal. Furniture for kitchen with doors made of plastic with aluminum frame or without it looks stylish and impressive.
• The wide color palette and a variety of options for the texture.
• High resistance to temperature regimes cuisine.
• The material does not absorb moisture.
• The furniture is easy to clean and resistant to wear. fabrication technologies allow the facades have the original form even after a long time.
• Do not fade in direct sunlight.
• Safe for health and the environment. Modern production uses in making MDF and acrylic plastic components, has no negative effects on the body.
• Furniture such facades shockproof and is not afraid of aggressive detergents.

In addition to these advantages, Kitchen with facades made of plastic have other advantages, such as wide design possibilities. Since modern production technologies allow you to create not just furniture with straight shapes of doors, but curved, radiused.

Minuses

• The glossy surface is prone to chronic pollution in the form of a fingerprint. This is especially evident on the dark door.
• facade edge over time can become a real problem. Aluminum tends to fade, and the matte surface was covered with scratches. PVC edge in continuous operation deteriorating rapidly, abrasions and exfoliate.
• At the junction of the plastic surface and eventually edge can accumulate dirt, which is difficult to clean.
• There is no possibility to make a milling on the front, as the plastic surface of the inflexible.
• Most often, the reverse side of the door is white, because the manufacturing technology involves applying a plastic surface with only one side - the front.

The positive qualities of plastic are far superior disadvantages, so it is safe to say that kitchen furniture with plastic facades - a good, functional and quality selection.

Creating a facade made of plastic with their hands

Contents facade PVC edge or acrylic can not be at home. It requires special equipment: machines and tools. but to perform door for kitchen furniture made of plastic with an aluminum frame - quite a feasible task. The advantage is also the fact that the independent production will double or even triple reduce acquisition costs headset.

1. First of all, should be prepared under the facade MDF sheet size. To do this, measure the desired length and width, adding to them the allowances to 20 mm.
2. Dust and dirt from the finished board to be removed and carefully wipe the surface.
3. Then, on MDF evenly applied glue or PVA "Kleiberit" if a more rapid drying.
4. Top placed desired size plastic sheet is fixed and rolled with a rubber roller.
5. To the surface firmly grips is required to lay them under the press for some time.
6. After thorough drying the product, you need to trim the edges of 3 mm. Then, the workpiece is milled at the ends to install aluminum frame.
7. Profile is cut on the workpiece size, and then the edges zapilivaem at an angle of 45 degrees.
8. At the groove on the end of the MDF panels filled with PVA glue or liquid nails. Inserted profile of aluminum and rattles rubber mallet. Joints carefully polished with a file.

Kitchen furniture with plastic facades - a good option for a modern interior in hi-tech style. Appearance it will long remain attractive, and ease of care and high quality material will not cause trouble at work in the kitchen. If you choose to self-production of plastic parts headset, you must carefully follow the technology and follow the detailed instructions. In this case, you can get a product indistinguishable in quality and appearance of the factory.

(30 estimates mean: 4,60 of 5)

Loading...