How to use the dishwasher properly?

Dishwasher (PMM), as well as other household appliances, laudable and approvals. After all, it completely takes over some homework, freeing up our time and energy. But if the operation of machinery raises questions and challenges, the enthusiasm rating may plummet.

In fact, any technique can be sorted out. Especially because of its manufacturers are doing everything to make it easier for us to process complex control devices. So let's deal. To learn how to use the dishwasher, as easily, later in this article.

PMM installation on site is better to trust the qualified technicians. As soon as the machine will be connected, we are sure to hold it a test run without loading dishes. It will identify possible shortcomings of the device installation, and at the same time be washed inside of the machine from dust, oil residues and other dirt.

To have a good wash all surfaces, single start is best done with the help of the most powerful indicators of temperature program. And do not forget to download before starting the machine for washing, as well as salt.

Salt protects the interior and parts of the machine from lime white bloom. Poured into the device, which is located at the bottom of MMP, accommodates about 1 kilogram. This amount will be enough of one to six months, everything depends on the water hardness in your area. Rules of the first filling salts are described in the instructions to the device.

That the appliance can properly consume salt, you are kindly requested to put in his memory rigidity index of your tap water. These data can be found in an organization dedicated to your home water supply. Some PMM models have at their complete special test strips that will help determine the hardness of the water. There are dishwashers units that can independently take readings from the water. They do this automatically at each sink.

After passing the idle start the machine will be completely ready for continuous operation. For information on how to load the machine dinnerware, and here there are rules in this next section.

Loading dishes into the dishwasher

On how you arrange the dishes in the baskets of the machine will depend on the quality of the final result. Firstly, you can not blame the dishes hit and miss and it overload the basket. This will prevent water jets evenly as possible to wash all of the items on either side. Secondly, before loading her dishes to be cleaned from the large food remnants. If there is much dried up and burnt the place, it is best to soak them in advance for at least 10-15 minutes.

In typewriters may be bundled 1, 2 or 3 of the basket. The compact models, the size of a large microwave oven, is traditionally one basket. The remaining (and narrow full length) - 2 or 3. At the bottom of the basket, where the water pressure is stronger, it made downloading largest and most dirty dishes: pots, pans and large plates. At the top are more fragile products: tea cups, saucers, glasses and wine glasses.

Large plates are placed in their designated compartments, the inside of the dishwasher in the center. All deep reservoirs (soup and tea cups, pans and pans) should be placed upside down to maximize bathed interior, the dirtiest part of the cookware.

Ladles, beaters, blades and other similar utensils stacked baskets horizontally in free space.

Cutlery can be arranged in baskets in two ways. Vertically in a special little basket, which is placed on the lower large pan. Or horizontally, sideways to each other in the top tray.

After download verify: dishes should not create an obstacle to the free rotation of the spray arms of the blades and makes it easy to open the receiver means for washing.

Please note that there are exceptions for certain kinds of dishes, they can not be washed in the PMM. These include:

• silverware, pewter, copper, aluminum, products made of brass and bronze;
• plastic dishes, not having appropriate markings;
• glued items and having a crack;
• wooden dishes and utensils;
• porcelain and earthenware cup with a patterned heat sensitive / coated.

Glass is permissible to wash, if MMP is present "delicate" program.

Household chemicals

Key:

1. Salt for water softening.
2. Detergent.
3. Rinse.

Use only specially designed for household chemical PMM.

For each order. About the salt we have already said a few words above. You know about its purpose and place of its dislocation in the dishwashing machine. When the amount of salt is about to end, the need to reload the device, you will inform the corresponding icon of the device display.

Washing agents used in the MMP, are of three types: powdered, gel, in the form of compressed tablets. When you install the washing operation with the process lasting less than 1 hour, it is better to use the first two types. Unlike tablets, these agents dissolve rapidly and completely used during washing.

Tablets are designed for long-term programs, 1 hour or more. This is advantageous from an economic point of view, because the tablet is worth much more expensive, but for the short program has no time to be used before the end.

The receiver, which are loaded detergents, located on the inside of the car door.

Rinse serves excipient which improves the drying result. He causes water to roll off the surface of the dish, not to leave stains on it and gives the dish an extra shine. To rinse the car created a separate compartment with the regulator. Filled compartment once for 5-10 washes. As is the case with salt, that it is time to refill the compartment, will tell you the device display.

The controller helps to establish the correct dosage of the rinse aid. We recommend starting with the setting knob at "4". If you notice that the dishes are water stains, increase the dose setting knob on the number "5". If the visible iridescence is the stickiness of dishes, reduce the amount by turning the knob to the mark "3".

There are "3 in 1" for PMM and colored pills. As you know, in such a tablet is pressed once all the three main substances. If you use this tool, you do not need to load into the car salt and rinse aid. Most importantly, pay attention to the specified on the pill degree of water hardness and use only those that are suitable for your water supply.

Over time, you may need money for preventive cleaning of the machine itself. Those that remove accumulated scum and grease (antinakip, degreaser). They are used as needed or once every six months. Due to the fact that with their help is washed not only the visible inner surface of the unit, but its hoses and nozzles, the life of the dishwasher is significantly extended.

Selection of the work program

Variations in operating modes, dishwashers machines a lot depends on the car model. options:

• normal (standard);
• Eco (economical);
• intense;
• delicate;
• fast;
• preliminary rinsing;
• automatic.

Normal mode is used for moderately soiled dishes. The duration of the washing process will be about 1-2 hours at the working temperature of 60 ± 5 degrees.

Economical program is used for lightly soiled dishes and save you two resources: water and electricity. Only it will be as much as 2 hours at 50 degrees Celsius.

When heavy soiling, adhering and burnt food containing starch and protein, makes an intensive program, where the temperature rises to a level 70-80ºS.

Delicate mode is suitable for dining rooms subjects from thin glass. The parameters of the process: temperature 30-40 degrees gentle and rapid washing for 20-30 minutes.

In some models, there are separate Quick cleaning mode. It can be used for the same objects made of glass, as well as for heat-sensitive plastics. The degree of soiling of the dish should be minimal. This mode is very useful for dishes that had just been used and it is necessary to re-serve your table.

Pre-rinse is suitable in cases when you accumulate the dishes for a long enough time. That leftover food does not dry thorough activate a periodic pre-rinse mode.

Automatic mode is based on a super-powered machines to determine the level of pollution dishes and set on the basis of the data obtained, the volume flow rate, process temperature and duration.

Additional options

Of the additional options will be useful as follows:

1. Option "Half load". If the dishes are not recruited on a full load, this option can help reduce the consumption of water and detergents.
   
2. Option «Intensive zone". Area, where the process will be in a more powerful mode will lower basket, and the top process bude occur in standard mode. Thus, you can simultaneously wash the tray in the bottom of the pan is very dirty, and the top is not particularly dirty cups and plates.
3. Option «Vario Speed». With this option, the program duration is reduced by 20-60% depending on the selected mode. But at the same time to achieve the same results as that without the use of this function, the machine must be increased consumption of water and electricity.
4. Option "Hygienic washing". Ideal for washing baby bottles, where it is necessary to achieve a greater degree of purity. On the last loop, the water temperature will be increased, whereby the dishes come out of the process in a hygienic condition.
   
5. "Timer" option. Most likely, it is very familiar to you the function of other household appliances. It allows you to defer the start of the washing process for a few hours - from 1 to 24 hours, depending on the car model.

Each of these options is not used in all programs. More precisely it can be found in the device manual.

shutdown

As with loading, unloading dishes, too, is subject to a few simple rules. Once the machine has completed the process and reported it on its display, do not rush to open the door to let the dishes to cool for at least 10 minutes.

The first rolling out and remove the dishes from the lower tray. Second unloaded middle tray, if the car 3, and then the top. This is due to the fact that the trays can stay a little moisture that will flow when removing the dishes and splash on the lower level.

further care

After discharging all glassware check basket walls of the chamber, filters, door seals. Clean them from the food pieces, if they are somewhere to stay. Filters should be cleaned periodically with running water to prevent clogging of the drain.

The car door at the end of all action is best left open to ventilate the humidity remains and to eliminate unpleasant odors.

Periodically check the condition of the rocker arm. They must be clean and free from scale, grease and food residues. They can be removed and washed with hot water under the tap, or alternatively, run in a car crash-duty detergent but without dishes.

accident prevention

Dishwasher safe enough unit. But the observance of several conditions will help you to avoid possible unpleasant consequences.

1. Again: Wait until the cooling dishes before you remove it from the machine.
2. When installing the PMM remember mandatory grounding device.
3. In case of malfunction an error check code decoding, which display instrument displays. If it is impossible to eliminate breakage independently disconnect the machine from the power supply, close the valve and the master call from the service center.
4. Do not install dishwasher next to the stove and heating batteries.