Glue for non-woven wallpaper quelyd: papering the ceiling and walls and technology consumption

Glue for non-woven wallpaper: the preparation of the walls, mixing and application of the adhesive


Table of contents

  • 1 Quelyd
    • 1.1 Benefits
    • 1.2 Specifications
  • 2 Preparing walls and mixing glue
  • 3 Apply glue to the wall
  • 4 builders Tips
  • 5 A few words on Non-woven
  • 6 Summing up

Purchasing non-woven wallpaper, in a timely manner is very important to take care of the purchase of a suitable adhesive.

What to choose KLEO or Quelyd - glue for non-woven wallpaper - the theme of this article.

for non-woven wallpaper adhesive


It is designed specifically for wallpapering non-woven base, as well as heavy vinyl coating, which will be painted after.


  1. Smooth and fast application by roller or brush at a special decorating the walls with his own hands.
  2. Excellent climbing ability, which allows easy joint.
  3. High speed pasting walls.
  4. After drying, the glue does not react with the paint.
  5. Completely safe for life and health.
  6. It contains antifungal and antimicrobial additives that can prevent the emergence of the fungus.
quelyd glue for non-woven wallpaper

Special machine for spreading adhesive wallpaper


Among the main technical characteristics can be the most important highlight.

  • Transparent mass is formed by adding water to the dry mix. The latter has the form of medium-sized cereal based starch.
  • Cooking time 10-15 minutes a solution, however, ready to use it will be only a day later, then it will be possible to glue non-woven wallpaper.
  • Consumption of non-woven wallpaper glue to small, is approximately 35 m² with one packet.
  • Drying and full grasp of the adhesive depends on the temperature and humidity in the room (Recommended + 5-25 ° C).

The table below shows the features of glue for vinyl wallpaper.

Consumption of glue for vinyl, non-woven and other types of heavy wallpaper X-Glass
The area of ​​the surface pasted 38-42 m2
The amount of water per 1 package 7.5 l
Mixing ratio 1:25
Number of rolls 8-9 pcs.
pre-packing 300 g

Also, for pasting the walls and ceiling, you can use X-Glass adhesive. It is made of particulate powder of synthetic and natural polymers. It can be applied on concrete, plaster, wood and even metal surface.

Preparing walls and mixing glue

Non-woven wallpaper pasting involves clean prepared wall. They should be dry, firm, flat.

If the walls have been painted before, they will have to sand and wash with special detergents. After that, rinse the wall with clean water and allow them to dry as non-woven wallpaper pokleit quality can only be in this case.

If the work is to be highly absorbent surfaces, such as wood plaster, drywall, pre-prime with them.

gluing non-woven wallpaper

Adhesive vinyl and wallpaper on non-woven backing KLEO

To mix, pour into a bucket 5 liters of water (for pokryaty based on non-woven) or 4.5 liters of cold water (for wallpaper, intended for further staining).

While stirring, water (creating swirl) slowly and carefully vsypte flakes adhesive along the edge of the bucket. Wait for 10-15 minutes, then vigorously stir the liquid.

Apply glue to the wall

  1. The technology of non-woven fabrics involves applying adhesive labels only on the wall.
  2. Before proceeding to this stage, from the window or door, draw a vertical line at 50 cm in length. This little trick will allow you to accurately calculate the cut at the level of the door frame.
  3. Apply adhesive necessary with a roller, which has an average pile length, or wallpaper with a brush. Do this along the lines drawn by earlier.
  4. At the same time, remember that you need to lubricate the wall not only to the width of the roll, but a little more on both sides. Promazyvat corners and places along the baseboard should be a small brush.
  5. Root can stand with "roll" or pre-cut strips. "On a roll" is permissible to glue those who perform this type of work is not the first time.
  6. After the web is adhered to the wall, straighten its top to bottom and from the center to the edge, removing the formed air bubbles.
  7. Use scissors to mark the bottom fold along the skirting board and cut it off as soon as it dries. Will make it easy, use a wallpaper knife.

builders Tips

A few tips from professionals:

  • For more efficient cleaning walls, it may be washed with bleach and then rinsed with normal pure water.
  • All tools washed and soak in warm water only, so you will extend their service life.
  • Excess adhesive should be removed with a damp sponge and clean.
  • Completely exclude the admission of fresh air into the room, which is under renovation. Drafts can instantly ruin all your efforts.
non-woven wallpaper pasting walls

Special non-woven adhesive Quelyd

A few words on Non-woven

The use for the production of nonwoven wallpaper has improved not only the performance but also the decorative possibilities. This coating can make your walls more profound. The effect is created by the embossed pattern in its volume.

If in the production of multi-layer fleece was used, while the top is corrugated, allowing the play of light on its surface fine.

If the ceiling is made pasting non-woven wallpaper in your room, look at the cover with a silk effect.

It is considered the most common on the part of the design and the degree of gloss. Such webs are produced on the basis vinilizovannoy dyed paper, which is then subjected to embossing and heating.

Summing up

We hope our article has been helpful to you. In order to more accurately understand the technological and practical issues on our website provides detailed photo and video instruction, in which you will find useful information on the question.