How to make a tennis table with your own hands: sizes, drawings

Many like to play table tennis, butnot everyone does it. First of all, it's a matter of expensive equipment. After all, tennis tables from world manufacturers are very expensive, and not every ordinary person can afford such a pleasure. But if you really want to chase the ball with a racket, why not think about how to make a tennis table with your own hands? Moreover, the matter is not so terrible.

Simple tips, without which you can not do without

Do not just grab the tools. You should start with very simple things. First of all, look around and select the place where the future design will be placed. Choose it should be based on the type of tennis table, which can be either stationary or lightweight.

The stationary table does not understand, for it it is necessary to build a separate room. Only then it will not deteriorate from the weather and the sun, and playing at such a table will be fun. But not every summer resident can afford to give extra meters to the playing place, so most often, choose lightweight tennis tables.

A comfortable tennis table with your own hands made to stand on a hard surface, have a perfectly flat surface and around it you need to provide free space.who already played table tennis knows that players periodically run away from the table for a short distance.

Tip: The ideal size of the site allocated for the game of table tennis is a plot of 5x8 m. And, there should not be any sunshine, there should not be wind gusts, there should be biting insects( well, it's probably not real at the dacha).

Preparing drawings, tools, material

Unlike some other items, the size of which can be increased or decreased, the tennis table must always meet the standards, otherwise it will be extremely inconvenient to play:

1. The height from the floor to the grid is 760 mm.
2. Table length - 2740 mm
3. Table width - 1525 mm

This is how the drawing of a standard tennis table looks.

Of course, all the parameters of the tennis table made by the hands of the drawings must reflect clearly and clearly. In addition to the standard dimensions of the table itself, the parameters of the grid to be installed in the future, as in this figure, also indicate.

Having defined the dimensions, we will turn our attention to the material and tools that will be needed for successful work. We will proceed from the fact that the above indicated the size of the tennis table with their own hands to do. Thus, we will need:

1. Plywood, preferably polished( 2 sheets, 1525x1525 mm, thickness 12 mm).
2. Cutting beam( 5 pieces, 50х50х3000 mm).
3. Mounting brackets for metal legs - 4 pcs.
4. Self-tapping screws( 5х89 - 38 pieces, 3,5х49 - 45 pieces).
5. 4 bolts for connecting brackets with legs.
6. Antiseptic for the treatment of wooden surfaces.
7. Putty for wood and aerosol paint in green and white colors.
8. Hacksaw.
9. Drill.
10. Welding machine.
11. Tools for applying primer and paint.

The list is made up, tools and material are prepared, now you can proceed directly to how to create a table for tennis with your own hands.

Widget from SocialMart

Step-by-step guide for creating a table for playing table tennis

Preparing blanks

As our table for tennis should be easy to assemble and disassemble, conditions must be created for this, specifically - it is necessary to cut the pieces of metal fasteners thatcan be easily disassembled and assembled.

It is not difficult to prepare plywood for the surface, since the sheets on sale correspond to our size.

Tip: Since plywood is sold in the right size, it will only need to be adjusted to fit the length. For this purpose it is necessary to measure from each sheet 15, 5 cm and saw off excess. This will ensure that the joints of the plywood will be located exactly under the net.

Now it's time to cut the bar, then treat it with an antiseptic. Such processing will increase the service life of the product and a table for table tennis with their own hands created will last a long time. While the bar dries, we weld the mounting brackets and make holes for the screws in them.

Assembly stages of the

1. table. We mark the beam and assemble it using self-tapping screws, a support table for the table. To strengthen the frame we fasten metal brackets to the corners, the task of which is to keep the corners in one condition.
2. Attach the legs to the attachments and, if necessary, remove the excess layer of wood. It is extremely important to achieve the accuracy of matching the leg and the attachment socket. So as not to confuse them in the future, it is better to number the details.
3. Now tighten the beams installed in the sockets to the bracket. For strength we use bolts and do everything very carefully and accurately. Having screwed all four beams, we receive a skeleton which will demand the further work.
4. We do the marking on the countertop, try it on and, with the help of screws, attach it to the finished frame. To do this, drill holes, apply the cover to the frame and carefully twist. Of course, you can screw the screws on the reverse side, you just need to calculate their length correctly. Otherwise, you can not make a folding tennis table with your own hands, but spoil it, since the ends of the screws will stick out on the surface and interfere with the game.
5. The final stage of our work in the process of making a tennis table with our own hands is painting. To begin with, the surface of the countertop must be prepared for painting, for which it must be blown with a strong stream of air. It is easy to do this with the help of a compressor. In its absence, the countertop must be carefully wiped and wiped with a cloth, sufficiently rigid structure. After all the actions, put a layer of putty on the surface and wait until it dries well.

The table top for the street table with your own hands is made in two layers: cover with the first layer - wait for the complete drying. We cover with the second layer and also wait, when it will dry well. Now, with the help of an aerosol can, we put a marking, install a grid and for the game table tennis table with our own hands is made, you can start using.

Tip: When making a table for tennis, calculate the length of the beams that will be laid so that they are shorter than the length of the playing surface.in addition, their cross section should prevent deformation of the countertop.

Using the information, you will quickly make a tennis table for the street with your own hands, than you can make your family happy and save your family budget considerably. Well, if you still have questions about how to make a tennis table with your own hands, the video will give additional explanations.