How to wash an embroidery with a cross: video, how correctly to wash

Before the beginning of washing it is recommended to cut or fix all threads that are located on the wrong side of the embroidery It is recommended to cut or fasten all threads that are located on the underside of the embroidery before you start washing. For sure how to erase the embroidery by a cross, experienced masters know for sure. But, what to do to those who set foot on the path of needlework for the first time and certainly does not want to be mistaken?Whether a simple washing powder is suitable for this, or other means are required, whether machine washing is suitable or only manual. .. there are many questions. The first and most important rule is not to rush. Needlework does not tolerate fuss, because it is aimed at appeasing its admirers.

Contents:
    • How to wash cross stitch initial way
    • Phased implementation works
    • that the Council masters
    • Do
    • alternative How to wash cross stitch( video)

How to wash embroideryCross: the beginning of the path

The primary and primary task is to study in detail the information about the canvas, offered by the manufacturer. As a rule, he gives maximum recommendations to ensure that the product is not damaged during washing. In this case, you can go and a little trick. Getting to work, it is desirable to allocate a small lapel canvas and sew on it the selected thread. In any order, without any drawings. It is this lapel that must be washed first. If nothing critical has happened to him, you can also erase the very embroidery.

In the presence of strong contaminants, it is necessary to soak the embroidery in water with detergent for several hours If strong contaminants are present, it is necessary to soak the embroidery in water with detergent for several hours.

Before starting water procedures, it is advisable to make sure that all threads are securely fastened and do not spread out from slight mechanical stress. If there are untreated edges, it is also better to fix them. Otherwise, they will become even more ruffled and completely fall into disrepair. Of course, you can completely enrich everything, but why, if problems can be successfully avoided.

Nothing complicated or impossible to work with embroidery. The main thing is to understand that it is necessary to wash delicate tissue, which requires special attention. Then all will necessarily turn out, and the updated embroidery will long please the eye of all associates.

The main components of success are:

  • Attention;
  • Diligence;
  • Performance.

This approach is just doomed to success.

Step-by-step execution of work

Of course, embroidery only tolerates hand washing, and at a water temperature of not more than 95 degrees. However, it should be taken into account that some, even the best quality paints have the property to fade at high temperatures. Therefore, in order to avoid misunderstandings, it is better to choose a temperature of not more than 50 degrees. Fortunately, and work with it will be more pleasant than trying to wash in boiling water. Do not squeeze water from the embroidery, it should just drain

The process is then carried out in the following order:

  1. If the edges are fixed with an adhesive plaster, it is better to peel it off. Otherwise, the adhesive layer can easily damage the work.
  2. If the canvas is marked with a special tear-off marker, it must first be rinsed in cold, literally icy water. If the embroidery is immediately immersed in boiling water, it will be practically impossible to wash the ink.
  3. If there is any doubt as to the quality of the threads, it is better to pre-bathe the work in a 7% solution of acetic acid diluted with 2 liters of water. Operates faultlessly.
  4. If the color has become ungodly go to the canvas, you need to act urgently. The fabric should be rinsed under a stream of ice water. This method did not work?Hence, the canvas should simply be soaked in cold water, changing it every 2 hours. In no case should the material dry out.
  5. If no problems arise at the preparatory stages, you can dilute a mild detergent in the water and immerse the canvas in it. Soak it should not more than 5 minutes, and then just rinse under a jet of cold water.

After the embroidery has become clean, it must be carefully spread out to dry on a flat, flat surface. It is strictly prohibited to wring it out or squeeze it out. And, if everything is done right, then in a few hours the work will be absolutely dry.

What the

masters advise Experienced needlewomen who have already completed a dozen works, often neglect the generally accepted rules and develop their own style. So, instead of a mild detergent they use an ordinary soapy solution. This is both economical and effective.

Some come and do the opposite: they erase the canvas before the work starts, and then treat it very carefully. Such a method has the right to exist, but no one will guarantee that the fabric will not get stained in the process of work. Therefore, for newcomers such a method is not suitable.

It is almost impossible to say exactly how to properly erase the canvas, but how not.

Do not use hot water to wash the embroidery, as the threads can shed Do not use hot water to wash the embroidery, as the threads can shim

All depends on the following factors:

  • Fabric quality;
  • Thread type;
  • Degree of contamination of the material;
  • Type of cleaner.

For a long time engaged in needlework, you can choose and your best option, working on the fact that the cross stitch embroidered with new colors.

Is there an alternative to

Any cross-stitch embroidery can be not only washed, but also cleaned by other related means:

  • Dry cleaning;
  • Steam cleaner;
  • Dry cleaning products;
  • Washing vacuum cleaner.

In the external paradox of some techniques, they are very successfully used by needlewomen. Why this or that method was chosen is a question of an individual character, probably having its own logical explanation. However, beginners are strongly encouraged to start with the simplest way - washing. And, if for some reason it does not fit, then even look for an alternative to it.

How to erase an embroidery with a cross( video)

Embroidery washing is definitely a painstaking, but not complicated process. Concentration of attention, frugality and lack of haste will certainly play into the hands of the needlewoman and make her work truly flawless.