popular and in demand today is the pump Kid Many owners of country houses and cottages are facing today, the problem of water supply, because the house in the country, most often, are not connected to the central water supply. Part of this problem can be solved by household pumps that pump water from wells, wells, open reservoirs. One of the high-quality and affordable devices, for today, is a submersible pump of domestic production Baby. About what features the pump has, and how to connect the device - read below.
-
- Purpose and performance pump Kid
- pump Kid: specifications
- pump device Kid
- Submersible pump Kid: installation
- Water Pump Kid: operating rules
- Vibrating pump Kid: Maintenance
- pump Features Kid( video)
Purpose and performance pump Kid
Submersible pumps are used in the private garden ognative areas, small farms and household plots. Positive feedback from the owners of country houses received pumps Rucheyk and Malysh.
The performance of the Toddler is 432 liters per hour on open tanks.
Due to this the scope of its application is much wider than that of the Brook: The baby can be used both for taking water from the well and wells with a diameter of more than 800 mm, and solving economic problems.
Kid pump can easily be used for garden plots
example, by a pump can Kid:
- organize irrigation system in the garden area;
- Fill household tanks with water to meet sanitary and hygienic needs;
- Drain water, in case of flooding, from basement and other premises( drain pump).
At the same time, it should be remembered that it is necessary to use a downhole vibro pump of basic equipment only for pumping and redistribution of clean water with a temperature not exceeding 35 degrees. In another case, various small particles and contaminants will contribute to the rapid wear of all mechanical elements of the device. For pumping dirty water, you can choose a pump with an upper fence: this will reduce the risk of possible breakdowns.
Pump Kid: technical specifications
Today there are several models of the Kid pump. In order to determine the choice, it is necessary to study the technical characteristics of the basic model. Many people are wondering what pressure the vibrating pump creates in the pipeline. Thus, the device gives a pressure of 6-7 atm. At the same time, it is possible to transport water with a pump for a distance of up to 100 meters.
When selecting a pump necessarily need to take into account its technical characteristics
most important technical features of the pump are:
- power consumption of the device( y Little is not more than 300 W);
- Supply mains voltage( 220 V);
- Nominal and maximum head( depth pump can be used to raise water to a height of 40-60 m);
- Hose diameter( is 18-22 mm);
- Cable length( 10-40 m).
When choosing a pump, attention should also be paid to an important characteristic such as the level of electrical protection of the device. Devices with the first level should be equipped with a grounding cable with three wires, devices of the second level should be equipped with reinforced insulation.
pump device Kid
vibration-type pump apparatus is quite simple: the device consists of an aluminum hermetic shell, inside which is located the drive core and two coils, and electrically vibrator. The principle of the pump is based on electromagnetic vibrations, which activate the membrane, forcing it to push water.
Before using the Kid pump, you should familiarize yourself with its device
Included in the pump are:
- Power cord length in the area of 6-40 meters;
- Flexible hose for irrigation;
- Sleeve for pumping water;
- Spare parts for the device( valve, piston);
- Operating Instructions.
The basic model comes complete with a filter for water purification. In some models, when the engine is overheated or the water level in the tank is low, the pump automatics turns off the power of the device. When the water rises, the pump motor switches on autonomously.
Submersible pump Kid: installation
The installation of the pump does not take much time and effort, since the device is small in size: the pump has a height of 24-25 cm and its diameter is 7.6-9.9 cm. The weight of the pump is notExceeds 3.4 kg( depending on the modification and configuration).
In order for the pump to work properly, it must be correctly installed
In order to install a submersible pump it is necessary:
- Provide a lower part of the lifting rope with a rubber spring that will damp the motor vibrations;
- Rewind the pump with a rubberized tow to neutralize harmful vibrations( if the pump walls do not fit tightly against the walls of the tank);
- Lower the pump using a special cord fixed in the grooves of the device.
At the first connection, it is important to allow the pump to run for several hours and then carefully check its housing and parts for any malfunctions and factory defects.
Water pump Kid: operating rules
To ensure that submersible equipment lasts a long time, it is necessary to familiarize yourself with the rules of its operation. This will avoid the rapid repair of the device.
So, when using the pump, the manufacturer recommends:
- Do not use the pumps if there is a high voltage in the mains, damage to the device's cord;
- Do not use the appliance for more than 12 hours a day;
- Do not exceed the continuous operation of the pump in 2 hours;
- With prolonged use, switch off the machine every quarter of an hour;
- Do not block water when the pump is on.
In addition, when pumping dirty water pump with a lower fence, without fail, you must use a filter at the inlet. This will avoid undesirable breakdowns and rapid deterioration of equipment.
It should be remembered that the summer operation scheme of the pump is not suitable for use in winter: the water will freeze in hoses.
To prevent freezing of water in the hoses, you can use the device Burtseva.
Vibrating pump Kid: maintenance
Electric pump Kid is a device that is not maintenance-intensive. The main thing is to follow all recommendations of the manufacturer, and you will be able to enjoy the uninterrupted operation of the device for more than one year.
It is possible to prevent quick decay of the device from the operation by selecting the correct power of the unit and following all the rules for its use from the manufacturer.
To pick up the power of the pump, which is sometimes called Baby and Baby, help consultants specialized stores. Sometimes the pump appears in the Leroy Merlin store catalog, where you can try to seek advice.
If the pump is used carefully, then it will last a long time
Pump repair The kid may be needed when:
- Mechanical damage to the hose;
- Worn or clogged valves;
- Separation of epoxy adhesive from the device body;
- Loose or worn lock nut of adjusting screw;
- Mechanical damage to the rubber swinging cuff;
- Damage to the swing rod.
Most of the failures can be fixed easily with their own hands: most of the accessories can be found in specialized stores, removed from old devices. The pump body is easy to disassemble, almost every part must be replaced and easily dismantled.
Pump characteristics Toddler( video)
Water pump The kid is a domestic-made vibrating device designed to draw water from shallow reservoirs, open water bodies. Pump The kid is characterized by high performance, durability and affordable cost. And with the installation of the pump will cope with any owner of out-of-town apartments. The main thing is to fulfill all the above recommendations. And you can enjoy the uninterrupted supply of water at your site, even without having to connect to the central water supply!
