Many say that repair of the pump by one's own hands is impossible. A broken pump must be carried in repair or discarded. However, if you understand the pumps, then before you carry it in repair or throw it away, it's best to try to repair it yourself. This is provided, if the warranty has expired.
The typhoon pump allows you to collect enough water for the whole
gardeners gardeners also recommend that the pump be prepared in advance. How to do this?
- We take the hose and connect it to the pressure nozzle. We also take the coupling for this. It comes with the pump. At the hose end we fix the coupling half and the rubber ring. Next, insert the hose;
- With a flexible reinforced hose we connect the Typhoon with the water supply system;
- We connect electric cable, kapron cord and hose together;
- We lower the pump into the well or well and start it.
On the Internet, you can find enough positive feedback about the work of Typhoon. Of course, the pump sometimes breaks down and breaks. But the overall picture is positive.
What is the circulation pump Typhoon
The circulation pump includes three components: a vibrating part, a water intake part and an electric drive part. The vibrating part includes shock absorbers, diaphragms, couplings and rods. At one end of the rod is the anchor, and on the second - the piston. Between the shock absorber and the diaphragm, an empty distance is specially made, so that the components direct the rod during the operation of the Typhoon. They ensure its tightness and do not allow water to enter the housing, where the electric drive itself is located - the main pumping part of the Typhoon. This pump can also be lowered into the boiler.
Circulating pump Typhoon is a vibrating pump for high-quality water intake from a well or well. This pump is used to pump 2.5 cubic meters of water per hour. The typhoon does not require any fastening to the walls of the well or well. He works on a suspension cable.
Circulation pump Typhoon is used for water supply of residential buildings, domestic facilities, industrial facilities, for irrigation in the country
The water intake component looks like a cavity. Above it is a glass with holes that draw water, which swings. There is also a sampling valve, which does not allow to merge back in the disconnected state of the pump. The part with the electric drive includes a core, two coils and a branch pipe that sucks water. In addition, they are filled with a compound.
The operation of the circulation pump depends on the alternating current, which creates mechanical vibrations. Shock absorbers convert current from electric to the same mechanical vibrations that are transmitted to the piston and anchors. Through water intake, the water is in the pump and then in the chamber. It contains a piston and several valves.
The pump body is made of cast iron, the shaft is made of ceramics. Connects Typhoon to a single-phase network of 230 volts at 50 Hz. The maximum pressure during operation at the pump is 10 bar. The limiting temperature is up to 100 degrees. Circulating pump Typhoon can be used in water with low stiffness, in clean, low-viscosity and non-aggressive and non-explosive liquids. They should not contain solids, impurities or any oils. The typhoon is an excellent model for recruiting water in the suburban area. But if you want something more, then for you there is a special pumping station.
Typhoon pump overview 2( video)
The circulation pump performs well in its suburban areas. It well pumps water from wells and wells. Literally in a couple of hours, he is able to completely provide water to your entire house and fill additional drums. The Typhoon pump is one of the most popular on the market. Buy it and pump the water to health!
