Shower without pallet: traps for draining water, tiles on the floor, make a siphon in the apartment, install a shower with your hands, warm

Shower enclosure without pallet - economical and practical solution For this kind of shower, different traps are used, which are necessary for draining the water and stopping mud in the bath. When making a bathroom, you need to take into account the direction of the sink. This will determine the accumulation of water in the bath.

How to choose the drainage trays

The drainage trays are necessary for draining water in the shower. When you are washed, water should not accumulate, but should quickly leave, so that there are no floods and the drain pipes are not clogged.

Large selection of drainage trays enables the installation of a shower without a shower tray in any room.

Trappairs come in three varieties:

• Spot. It looks like a small hole. The lattice of such traps is square, sometimes rectangular. Installation can be done anywhere. This trapezik is used most often. For small showers, this is an excellent option;
• Linear trailer. His shape is rectangular and narrow. The installation goes along the wall at some distance. Its main difference is the shape of the receiving chamber;
• Wall-mounted. In form it is similar to a linear ladder, but its feature is that it can be installed both in the wall and in the floor. He looks very nice and elegant in the bath. If you install it on a wall, then there must be sewer pipes behind it. The drain outlet should be exactly near the wall.

For each shower room, there will be suitable traps for draining water. In many houses there are point variants, but you can also see linear views. Wall traps are rarely used, as they are difficult to install. We have to do the sewage in the wall. It's worth it, but the bath with it looks beautiful.

How to install a ladder in a shower under the tile

If you decide to install a ladder in a shower under the tile, then you need to know all the nuances of its installation. This will allow you to properly drain the water without excess pollution under the tile.

Shower with ladder is a good idea, but requires special care in the installation sequence

When installing the ladder, you must raise the floor level and create a slope. As a rule, you need to make a small podium in 15 centimeters, where a siphon with drain pipes is installed.

Sequence of installation:

1. We measure the space from the walls to the ladder to lay a multiple number of tiles;
2. We connect the gangway with sewer pipes;
3. We heat the screed. Plates of foam plastic can be used, which are laid on the rough surface of the floor and then adjusted to the dimensions of the ladder;
4. Fill with concrete mortar;
5. Leave the screed until it is completely solidified;
6. Make the gasket for the flange;
7. Put the upper part of the flange on the gasket and screw it to the lower part;
8. Putting a waterproofing layer;
9. Insert the inner part of the siphon into the ladder body;
10. We exhibit plastic slats;
11. Fill the second layer of screed;
12. We cover the drain with moisture resistant tiles;
13. We rub the seams;
14. We fix the grate to the body of the gangway.

Such arrangement and sequence of actions, will help to make everything neatly, reliably and for centuries.

Installation of a ladder for tiles can be ordered from specialists. They have all the necessary devices for high-quality installation. If you want to save money, you can do it yourself. However, many tenants who tried to make a ladder with their own hands, still recommend turning to professionals.

We make a shower drain in the floor for a tile

A stairway in a standing shower under the tile is installed in a special floor opening and connects directly to the pipe. The device of this shower is 5 elements:

1. Taps. They come with couplers and connect to sewer pipes;
2. Grille. They should be removed. The main purpose of the grid is to stop the debris that goes into the sewage drain;
3. Flange. It seals the membrane, which is waterproof;
4. Siphon. It creates a water seal. There is also installed a hydro-panel;Voronaya for receiving water.
5. .

Stainless steel is used to create the drain. This will help ensure long-term runoff, and the material is durable.

A tiled quality gangway will provide a long and reliable operation of the drain in the shower.

Among the basic nuances of installing a ladder for tiles is the quality of the materials. Coverage should be reliable in any case. Do not save on the ladder, because when it breaks, you have to re-install. In addition, a bad ladder can not cope with clogging and you will have to change pipes.

To install the ladder, raise the floor level. It is necessary to create a tiled slope that will guide the water to the sink. At installation it is necessary to observe that the protective grid is not higher than the level of the floor itself. The height of the thermal insulation layer should be 5 centimeters. For this purpose, you can take expanded polystyrene. Then you need to make a black screed made of concrete the size of 4 centimeters. It is on it you will put a waterproofing membrane. It is needed to create an airtight floor in the bathroom. Next, we put a clean concrete screed. Its purpose is to create a slope to divert water to the ladder. Next, we use the floor method of laying moisture resistant tiles.

If you have experience in laying tiles, then you can put the sink by yourself. If your bathroom is small, then the installation will not take much time. First of all, always consider the quality of the material that you use for installation.

Repair in the bath: how to make a shower without a shower in the apartment

How to make a shower without a pallet in the apartment is an option that will create additional space in your bathroom. Immediately recommend that you give all the repair work to install such a soul specialist.

A shower without a tray will save space in a small bathroom

With a shower cubicle without a pallet, you must design a ladder, provide a step, including a tile, a ladder and pipes, consider the advantages and disadvantages of materials so that the shower after washingdry. For work, you must have an inclination level, a tape measure, a pencil, a trowel, a container for concrete and a tile cutter. Not every home owner has these funds, so specialists will help in this. Refer to them.

Some residents prefer to make shower systems without a pallet in the apartment on their own. However, this can lead to the flooding of neighbors or their room and additional expenditure. Therefore, call specialists. The main thing, buy only quality materials for your room.

Installing a shower ladder with your own hands( video)

A shower without a pallet has clear advantages over its shower counterparts. The stationary shower at certain points loses the soul without the pallet. First, it saves space in the bathroom. Secondly, additional free space is created. And also, it's easy to take care of and clean this shower. Therefore, think about doing it in your bathroom. After all, how nice to take a warm shower!