Lighting in the bathroom with a stretch ceiling: photo fixtures, how to choose a ceiling light-emitting diode

Lighting in a bathroom with a stretch ceiling is better to be entrusted to professionals Light in a bathroom performs not only a decorative and aesthetic role, but also has a multifunctional purpose. For this purpose, lighting products of different brightness and design are installed. In this case, the configuration, brightness and type of lighting are organized based on personal preferences, bathroom area and technical features of the room, including the type of ceiling cover.

The correct layout of bathroom lighting

Qualitative lighting is the result of a competent arrangement of lighting equipment and properly selected lamps for the type of room.

The lighting scheme of the bathroom is presented as:

1. Top lighting or ceiling light( spot, plafond);
2. Working or auxiliary-zoned lighting( spots, wall-mounted ceiling lamps);
3. Lower lighting.

If the room undeveloped stretch ceiling, the lighting fixtures are selected and taking into account the technical features of PVC film

Decorative lighting can be performed as floor spotlights around the perimeter. If the bathroom has a decor in the form of steps, niches or a pedestal, the floor lamps will emphasize them originally.

To correctly choose bathroom lighting, it is worth considering the recommended lighting standards. So according to the ISO 8995 standard, the bathroom room needs an illumination of 200 lux( lux).This standard comes from the technical features of the bathroom, taking into account the needs of the individual on which physical and mental health is based. This indicator is taken to calculate the power of the lamps. It is also worth taking into account the light parameter per square meter of the room, measured in lumens.

For a small bathroom, both parameters are equal. To determine the lamp power in watts, which is required per square meter of room, there is a special formula. Alternatively, you can use data from special tables. For example, a halogen bulb of 35 watts corresponds to 670 lumens. Given standard 200lk = 200lm per square meter of a magnitude sufficient to size in the bathroom 3 square meters, but is insufficient if the size of more than three.

When selecting lighting, you need to know the area of ​​the room and the required power of lighting equipment, taking into account the recommended standards.

Selection Rules lamps for suspended ceilings in the bathroom

ceiling light for bathroom with tensioning systems must be planned and mark up before installing the very basis of a tension structure. In this case, it is worth considering what kind of fixtures stand the tension web. Because overheating, which can arise from the lamp, deforms the foundation of the stretch ceiling. The permissible lamp power is 40 watts for a polyvinyl chloride film and only 60 watts for a fabric backbone.

For tensioning systems taking into account the technical features of suspended ceilings and ISO standards set lamps with:

• filament lamp in 25 W, which is approximately equal to 200 lumens;
• Halogen lamps of 42 W are approximately 625 lm;
• Fluorescent lamps at 40 watt - about 2000 liters;
• LED lamps 40-60 watts - about 6000 liters.

Weatherproof lamps have an internal closed structure parts which have water repellency

Bathing space has an increased humidity, which means that any electrical wiring must provide it. For such a room, auxiliary measures have been developed - covering the ceiling and floor with waterproofing and ventilation.

Installation of a tension system made of PVC film is one of the methods of waterproofing, which will protect the room when flooding from above.

However, recessed fixtures that are mounted on the ceiling itself can suffer from the same water "from above".Therefore, ceiling lamps in the bathroom should be waterproof in themselves. The marking of such luminaires is denoted by IP class.

For the bathroom, IP is identified:

1. 0-3 units - protection is not provided;
2. Lamps marked with 4 units have splash protection;
3. 5-6 units - are protected by a jet of water;
4. 7 units - waterproof lamps;
5. 8 units - hermetic leakproofness of lamps.

Waterproof lamps are insulated against short circuit, less susceptible to corrosion damage and do not last longer.

Suitable fixtures for stretch ceilings in the bathroom

In modern designs use spot lighting, including in the bathroom.

According to the installation method, spotlights to tension structures can be:

• Overhead;
• Built-in.

When selecting bathroom fixtures, it is worth considering the shape of the device, the landing flange, which must be at least 1 cm wide, the need for ventilation and insulation.

The installation of the overhead luminaires takes place on the surface of the tension web. With this type of lighting technology, it is possible to use any type of lamp. Installation of the built-in luminaires begins before the tension of the cloth, directly on the ceiling itself, and the final installation of lighting occurs after the tension of the entire ceiling structure.

The advantages of built-in lighting technology include:

1. Sealed fixtures, which is a significant plus for the bathroom;
2. Modern popularity and a large number of design ideas with photo interiors using the built-in type of lighting.

Ideal luminaires for stretch ceilings: LED lighting

Of all the variety of lighting technology suitable for tensioning structures, the most ideal are LED devices. The LED that is inserted into the bulb is a semiconductor, namely an instrument in which an electron-hole transition transforms the electric current into optical radiation.

The advantages of LED lighting are the following parameters:

• High energy saving level( highest of all lamps);
• Long service life;
• Cost-effectiveness of lamps;
• Quality transformers, which protect the lamp from interruptions with power supply;
• Panoramic lighting that is suitable for small bathrooms.

LED lights can be considered as a high cost for the lamps themselves and additional equipment for them - transformers and ventilation systems

LEDs are used for:

1. Spotlights;
2. LED strips( dyroliths).

Decorative additional lighting is created using durolites, which can be built into the tension system itself, for example, around the perimeter of the bathroom or along the perimeter of the bath itself to zonate the room. The LED in this tape is presented in the form of a white color, both basic and in the form of multi-colored colors. The main function of such auxiliary lighting is considered to be exclusively decorating and creating a suitable atmosphere for the bathroom.

Lighting installation in a bathroom with a tension ceiling( video)

It is not difficult to choose lighting for a room with a ceiling tension system if you understand the structure of a stretch ceiling, know the film features, the specifics of the room and the technical characteristics of the lamps themselves with lamps. To give preference to the most proven lighting equipment, you can after analyzing all the parameters.

Examples of lighting in a bathroom with a stretch ceiling( interior photo)