Gas gun for tension ceilings: without gas and thermal, the capacity of the cylinder, which one to choose from a gas silicate unit

Only professionals should work with a gas heat gun. Increasingly, people resort to the use of stretch ceilings. Such designs are very ergonomic and look attractive. To install tension ceilings, you need to use specialized equipment. When installing the construction, builders resort to the use of a special gas gun. It helps to evenly heat the surface of the blade and prevents the formation of harmful condensate on the surface of the supporting tiles during the fastening of the films.

How to install suspended ceilings without gas

Many people are afraid to work with gas equipment, because it is wrongA good work with it can cause an explosion. You can tighten ceilings without the use of a gas gun. It is quite easy to do this if you have the necessary materials.

In order to hang ceilings without the use of a gun you will need:

1. Rotary hammer. If not, use a drill.
2. Screwdriver. Prepare for him a variety of nozzles.
3. Roulette.
4. Simple pencil.
5. Level. Suitable for both water and laser.
6. Paint brush.
7. Building or conventional hair dryer with high power.
8. Screws, screws and other fastening materials.
9. Fabric cloth.
10. Baguettes that are suitable for mounting ceilings without a seam.

Before starting work, it is absolutely necessary to properly prepare the surface for subsequent stretching of the ceilings. It is recommended to remove the old plaster and eliminate cracks and other microroughness of the surface. If you have the opportunity, cover the surface with a special antifungal primer.

For the result to be happy, the work surface

must be carefully prepared. The procedure for installing a stretch ceiling without gas is as follows:

• First, make a careful measurement of the room. Make measuring work around the perimeter of the room.
• Then lay the wiring in the ceiling area. Do not forget to attach special transformers to the surface, which will, if necessary, lower the voltage.
• Using your marks, attach a baguette frame to the surface. Step for fastening choose according to the materials from which your walls are made. For example, if they are made of concrete, then the optimal step is 25 cm. If the surface is wooden or the house is made of a gas silicate block, shorten the step up to 15 cm.
• Then stretch the ceiling liner. Do not forget to attach the edges of the cloth to the framing frame. Using a spatula, insert the edges of the fabric into the baguette.

Assembling a tension ceiling without a gun( video)

Thermal gun for tension ceilings: varieties and power

Heat guns can work on electricity, gas or diesel. Each type has its own characteristics.

The gas gun has a power from 10 to 100 kW, depending on the model. The advantage of such devices is low weight and economy. It is worth noting that harmful chemicals are not emitted into the air during operation of such units. When working with the device you need to monitor the gas pressure indicator. For example, if you work with a 30-kW gas gun, the optimum pressure is 0.7 bar. These devices are not suitable for use in cold rooms.

The gas gun gives almost 100% efficiency, because the heating is the same air in which the fuel burns

The electric heat gun is considered the safest. Such devices are mobile and have small dimensions. In addition, electric guns do not need constant fueling of a certain fuel.

The disadvantage of these guns is a small power. These devices are powered by 220 or 380 V. The power of electric guns averages 5-7 kW.

Thermal guns on diesel work the same as gas. Such devices have some advantages. Guns on the diesel engine run on solar oil, and at one gas station can work for about 10 hours. The power of such units varies from 10 to 100 kW.

Area of ​​application of a diesel thermal gun - repair work and space heating

The disadvantage of guns on a diesel engine is:

1. High weight.
2. Difficulty in transportation. This unit must be transported exclusively together with the cylinder.
3. High cost.
4. The need to maintain additional components of the device due to the impact of solar oil.

Which gun is better to choose for stretch ceilings

During the stretching of the ceiling, the question arises: "Which gun is better to choose?"When choosing a particular device, you need to pay attention to the conditions in which you will conduct the installation and the size of the room.

If you require a high-power device for installation, it is better to give preference to a device that operates on a diesel engine. It is worth noting that you can use these devices only if the room has good ventilation.

Diesel guns are extremely undesirable to use when working in enclosed spaces, since they release harmful toxins during operation.

If you need high mobility and rapid heating of the room, then choose the direct-heating gas gun. While you are installing with this unit, you must adhere to the safety rules. If you install the ceiling in a cold room, it is forbidden to use this device.

When installing suspended ceilings, gas cannons with a power of 10 kW are used.

Electrical units are advisable to use if you do not have the ability to constantly refuel. It should be noted that such guns have a significant disadvantage - when using them, there is a need to use a large power connection.

Recently, infrared gas guns have become very popular. They have a number of design features. The disadvantage of such devices is their high cost and the need to connect to the electrical network.

The advantages of infrared guns include:

• No harmful vapors during operation.
• Noiselessness.
• High power.
• Possibility of heating open spaces.

Infrared heat gun does not heat air, but objects that are in its range

Gas cannon types

Gas guns are classified by the heating method. There are devices with direct and indirect heating. They work on the same fuel, but they have some differences.

The design of direct heating devices does not purify the air flow that exits the gun from various combustion products of the fuel. This means that a small part of the impurities can remain in the room after the end of the installation work. That's why such guns are recommended to be used only in well-ventilated rooms.

In devices with indirect heating method, there is a special ring heat exchanger. It is the most important heating element of the gun.

The heating circuit in this device is as follows:

1. Fuel( gas) burns to the chamber.
2. Products formed after the combustion of fuel, fall into the ring exchanger.
3. After that, the chemicals come out through the chimney, which is previously displayed on the street.

These days these devices protect against overheating. Their cost is much higher. However, if you are a beginner, then give preference to only such guns, because they will protect you from the detonation of the balloon.

Heat gun device: what to look for( video)

The variety of thermal devices for the installation of a stretch ceiling allows you to choose a product taking into account the characteristics of your premises. When working with gas guns, be sure to adhere to the basic safety rules. Do not forget to monitor the pressure of the cylinder. If you are looking for a completely safe device, then give preference to guns that run on electricity.