Stretch ceiling is a harmonious combination of durability, operational stability and beautiful design Over time, stretch ceilings have gained immense popularity. Install this design can be even in low rooms, however, in this case, a number of preliminary calculations should be made. Remember that it is not advisable to install a stretch ceiling from gypsum board or PVC panels if your room is less than 2 meters high. In such cases it is recommended to install a fabric cloth, since it falls down to the minimum distance.
-
- Height of the room under the suspended ceiling
- How much the base ceiling falls in the suspended ceilings
- How to reduce the distance between the ceiling and the stretched ceiling
- How many centimeters from the base ceiling are the tension ceilings
- What is the minimum distanceFrom rough ceiling to stretch ceiling
- Stretch ceiling installation( video)
Room height under suspended ceiling
What is the height of the base flowIs most optimal?According to SNIP, the height of the room should be at least 210 centimeters. If the ceilings are lower, then only fabric fabrics can be installed.
If you decide to install a tensioning cloth, then you need to consider a number of factors:
- Height of the bearing frame. Many people prefer to use massive fasteners and profiles. Frameworks made of massive UD-profiles, eat an average of 10-20 centimeters.
- Availability of communications. Before you start the installation of the canvas, you need to communicate. If there is a lot of communication in the ceiling area, then the ceiling height becomes 10-15 centimeters lower.
- Dimensions of lighting fixtures. Normally, spotlights are used to illuminate tensioning fabrics, because they do not take up much space. However, many people prefer chandeliers. Use them undesirable if the distance between the base ceiling and the floor is less than 270 centimeters.
When installing a tensioning sheet in a room with low ceilings, remember that the presence of various communications and lighting devices reduces the height of the room by 20-30 cm
If you plan to install a stretch ceiling in a low room, you can not useBaguettes of PVC, as they have larger dimensions than aluminum. In addition, the latter are more durable and durable.
How much does the base ceiling drop when stretching ceilings
How much does the stretch ceiling take?This will depend directly on the material from which the hanging fabric is made. It can be made of synthetic fabric, gypsum board or film. Also there are lath ceilings.
The height of the room can be reduced by:
- 20 centimeters, if plasterboard sheets are used. In order to lower the height of the lowering, it is necessary to apply a primer to the ceiling. In this case, the ceilings will drop by 15 centimeters.
- 3 centimeters if using a film, provided that the base surface is smooth.
- 5 centimeters if lath ceilings are used. The rack ceiling absorbs little space, because its height is regulated by means of special springs.
- 5-8 centimeters, if fabric fabrics are used. They do not always require the installation of a frame, so the ceiling height will not decrease by more than 8 centimeters.
Low ceiling for installation of wall light sources
The distance to which the room decreases when installing tensioning sheets will also depend on the smoothness of the walls. This is due to the fact that the frame structure under the suspended ceiling is often fixed using anchors on the walls. Experts recommend that before the installation begin to align both the base ceiling and the walls.
How to reduce the distance between the ceiling and the stretched ceiling
If desired, you can significantly reduce the distance between the base surface and the tension ceiling. To do this, you need to pick up suitable building materials and lighting equipment. In addition, you should choose the best method of attaching the blade.
To reduce the distance between the base surface and the tension ceiling, you need:
- Use spotlights that are small in size. For example, an LED spotlight is mounted at a shallower depth than a chandelier. If you do not want to deviate from the base surface for a long distance, then give preference to LED ribbons. They are attached around the perimeter of the tension web.
- Use the wedge mounting method. It will save 5-7 centimeters.
- Choose linen and drywall sheets because they do not require the installation of a massive crate.
The low height of the working profile is the main advantage of the suspended ceiling tensioning system
If you want to save as much space as possible, you can resort to wall lighting. In this case, the distance between the base surface and the tension web is reduced by 2-3 centimeters.
How many centimeters from the base ceiling are eaten by the suspended ceilings
Depending on the material and type of baguette, the stretch cloths can be eaten from 5 to 20 centimeters from the height of the base ceiling.
In many respects, changing the height of the room will depend on the type of baguette that is used in the installation.
For stretch ceilings:
- Wall profiles made of PVC, the height of which is 2.5 centimeters. Use such fasteners are not recommended, as they take 3-7 centimeters from the height of the base surface.
- Wall profiles in aluminum, the height of which is 3.5 centimeters. Such profiles take 4-6 centimeters from the height of the room, however, provide more reliable attachment of the cloth.
- Ceiling aluminum baguette, the height of 2.2 centimeters. This profile takes no more than 2-2.5 centimeters from the height of the room.
- Combined profile, the height of 2.4 centimeters. If you use such a detail, then you need to retreat 8-10 centimeters from the base surface.
The film ceiling helps to hide defects in the base surface and disguise any communications
The best option is aluminum ceiling baguettes. They are durable and compact. If you want to install mirror cloths visually increasing the space, it is recommended to use exclusively ceiling moldings made of aluminum.
What is the minimum distance from the rough ceiling to the stretch ceiling
What is the minimum distance that the belt can be installed?Experts argue that the minimum distance between the rough surface and the hanging sheet is 3 centimeters. This height can only be achieved if the base surface is perfectly flat, and you use a film.
You can use films even in "Khrushchev".Such ceilings do not require special care, and look very presentable. In addition, film ceilings can be installed even if there are uneven surfaces on the base surface.
When installing the film, take into account a number of nuances:
- Use only the stacking mounting technology.
- Use LED spotlights. They do not require the installation of large-sized mortises and thermal rings.
- Install the thread before installing the film. It will help to avoid the appearance of altitude differences.
Assembling tension ceilings( video)
The height adjustment should be carried out prior to installation. Do not forget to level the walls and ceiling. Otherwise, the structure may become deformed. For the manufacture of the crate, use aluminum profiles, since they have smaller dimensions. In case you want to save a large amount of space, use a glazing or wedge mounting technology.
