Installation of stretch ceilings: video installation of the structure with their own hands, technology and installation methods, order and process, instructions and tools, specifications and rules

Assembly of the tensioning cloth requires neatness and slowness, only this will result in a beautiful and durable ceiling Correct installation is a guarantee of excellent work quality!Installation of stretch ceilings requires patience, composure, and, if you will, diligence. Very simply, in a hurry, irretrievably spoil the tension cloth, which requires a special, careful attitude. But, having established such ceiling, you will longly enjoy its beauty, together with relatives, relatives, colleagues, friends.

Tension ceiling is one of the most successful types of finishing the base ceiling, which, as a rule, are not a model of smoothness, aesthetic and technical beauty. But, as practice shows, to fix this problem it is possible and necessary, having mounted tension ceilings, for example.

Installation of tension ceilings: with ready-made structures - faster

Many companies are engaged in the manufacture of finished structures for various ceilings.

It happens that it is quite problematic, for example, to arrange 2-level ceilings, both with and without light.

In order not to "reinvent the wheel", it is better and easier to purchase a ready-made frame, which many companies are able to produce in 24 hours. Produce frames on the latest technology from strong alumel alloys.

Prefabricated frames for suspended ceilings are modern constructions that allow the fastest and most efficient assembly

Advantages:

• Ready modules are brought to the site, and then installation takes only a few hours, We are talking about installing a two-level ceiling;
• A qualitative skeleton is the guarantee of long operation of the coating itself and of the impeccable appearance of the ceiling coating;
• Typical products are produced quickly, according to the size of the customer, due to automated production;
• The assembly is noticeably accelerated;
• The lack of plastic, timber and plywood instills in the customer some optimism and respect for the manufacturer."Rating" of its own ceiling in the eyes of the consumer, soars to the skies, and not without reason.
• The most daring design solutions are easy to implement.

Different forms of skeletons, with different types of transitions, open up new possibilities, especially for two-level ceilings, where "piece" and very laborious work is to be done.

Assembling the tension ceiling with your own hands: everything is doable

Having made this decision, especially since you have never done this before, you decided on some labor feat. However, there is no feat in this, because the whole thing is solved quite simply. But, one resolve is not enough.

In order to perform the installation of a stretch ceiling, it is necessary to prepare a tool for this work.

Most likely, you certainly have some minimum tool, but to mount tension ceilings, you need to have something else, which, perhaps, is simply not in your tool arsenal.

A number of tools are required for the installation of a stretch ceiling

Tool and hardware:

1. Rotary hammer or impact drill;
2. Level. Levels can be used and bubble, but, of course, best of all - laser level.
3. Dowels of the right size and in the right amount.
4. Painting knife or stationery.
5. Blade( spatula).

In any case, you need a stepladder.

Before you buy a tensioning cloth, you need to make the necessary measurements of the room - in this case, measure the perimeter. However, this is too early to put an end, because, you need to also purchase accessories, in the same building store, where you will buy a stretch.

If the tensioning sheet is made of PVC, then you will also need a gas heat gun, with a gas cylinder, for warming up the room.

The choice of components depends on your choice of the suspension system, but this will be discussed below.

Suspended ceiling installation technology: depends on

as there are several types of suspension systems, mount them in different ways.

First of all, it depends on the type of stretcher, though not only from this, of course.

Cloths are divided into two types.

For the installation of PVC sheets, the use of an air gun

is required. Kinds of cloths:

• Polyvinyl chloride or PVC is simply a vinyl film. It is mounted by the following methods: harpoon, beak or wedge.
• Fabric. They are a special fabric impregnated with polystyrene.

Looking ahead a little, it's worth noting that the fabric is easier to assemble because it is not as easily damaged as a PVC sheet. In addition, the fabric cloth, as already mentioned, is mounted without the use of a heat gun, that is, in a cold way.

Tension ceilings: mounting methods are given below.

There are several ways to install tension ceilings.

The method that is most suitable for the consumer is used.

After reviewing the lesson on this topic, in the form of a video clip, and also having studied the secrets, and the tension ceiling device itself, features and nuances of this work, in order to exclude all possible errors, you can easily undertake self-installation. It is not superfluous to study the opinions of those who did this work independently. Do not regret this time!

Static ceiling tensioning system - the most simple and budgetary

Available methods:

1. Stake system. The principle is simple. Snapper is inserted into the metal profile. The stapik quite firmly fixes the canvas. The method is budgetary. The most important drawback of this method of installation is that frequent dismantling of such a system is simply counter-indicative, which is not always good, especially if you are often flooded with neighbors from above.
2. Wedge system. It has some resemblance to the previous one, but instead of the glazing bead a wedge is used - it is also inserted into the profile, and thus the canvas is held. This method is not used very often, and, basically, it is used in wet rooms. The development is import, and quite expensive, with undoubtedly high quality.
3. "Clothespin". Applicable only for the installation of stretch ceilings, where a seamless fabric is used. There are no staples, no wedges - everything is arranged on the principle of a self-grip lock. A similar system is also not cheap, therefore, the design is also not often applicable. This technology was conceived and developed in order to be able to install the ceiling with their own hands, however, this idea, simply, did not get accustomed.
4. Harp harness. In this method, instead of the beak, a harpoon edging is applied, which is welded to the ceiling sheet. Types of harpoon systems are different, but only basically one of them is applicable. The harpoon system is not simple, however, does not require super qualification of the performer. Nevertheless, everything is based on very accurate measurements.

So, still the most popular ways of installing stretch ceilings are the staple system and harpoon.

Stretch ceiling installation procedure: step by step

The installation procedure for stretch ceilings is a process that does not tolerate rush and fuss. All the work, from beginning to end, you need to do thoughtfully and not hurrying.

The speed of the work depends on how well all the installation rules are observed, and also, if the sequence is followed, and, of course, their good result, in the end.

Proper installation has a clear sequence of all stages, of which the described installation works consist.

All ceiling installation work begins with marking the walls and fastening the frame

Steps:

• Marking. It all starts with the marking of the walls, and it starts from the corners. The markings should be made based on the fact that under the suspended ceiling there must be a fixture of fixtures, or chandeliers. The lowest angle in the room is taken from the base angle. After the angles are marked, they remain connected by a straight line, and then the laser level will come to the rescue. On the received line and will be attached a baguette.
• Profile fixing. The profile is fixed to the walls, using dowels or screws for this purpose, the distance between them should not exceed 8 cm. Correct installation of the profile is 50% of the work, and the guarantee of a successful subsequent stretching of the fabric.
• Installation of the fabric. Cloth is mounted only if the room temperature has reached + 40 ° C.Conditions are comfortable, for the installer you will not name, but, nevertheless, this condition is registered in such document, as the instruction.

Thus, you see that nothing is impossible here, all of the above, it is quite possible even for the average apartment owner.

Stretch ceilings installation process: step by step

Cloth is removed from the package with clean hands. It is laid out on the floor, which must also be clean, where there is no debris, dust and small metal parts, say, dowels.

These so-called "little things" are able to ruin the canvas before installation!

The process of installing the canvas is quite a responsible exercise, therefore, it is very important to observe the strict order of each step in the installation.

The blade is fastened from the angles( diagonally!), From the base angle, and the next corner, as already mentioned, will be opposite, and t. It is necessary to warm up the corners with a gas gun. To better understand the whole process, you need to use the instructions attached to the material.

Fastening of corners is carried out with the help of so-called "crocodiles" - special clips with a gasket, which protects the canvas from possible damages.

Carrying out the further warming up of the film, the "crocodile" should be removed from the first corner, and using a scapula that is wound into the groove of the edging of the canvas, we fill the canvas in a baguette. Moving, therefore, to the next section, the previous section is held by hand, preventing the involuntary return of the film from the seat.

The other corners are fixed in the same way. Since all the difficulties lie closer to the end of the work, therefore, you would not be hindered by an assistant, perhaps not one.

After that, we fix the film on the walls using a straight blade. Places where there are seams are fastened with locks, the number of which varies from 2 to 3.More precisely, you can understand the process by studying photo and video materials.

In addition, step-by-step instructions are best studied using parallel special drawings that complement it well.

Installation instructions for stretch ceilings: read carefully

Proper, quality installation of the system is unlikely without studying the relevant instructions.

In order to prevent a marriage in the work, despite the fact that the deadlines for completing the repair are tight, it is necessary to study the characteristics of the tension web, the component parts. In addition, it is absolutely not worth neglecting safety techniques.

Installation of stretch ceilings is associated with some difficulties, which are due to the specificity of the ceiling material, the accuracy of the measurements, and also due to the use of a gas gun.

Installation of a cap - the last stage of installation of a stretched ceiling

Instruction:

• During the whole work, it is necessary to ensure that there are no wrinkles and wrinkles on the canvas. In time, the noticed oversight is not so terrible, and it is quite, as a rule, reparable. If, after all, it happened that you noticed defects with some delay, then you can and should try to eliminate it with a heat gun, warm up the area, slightly having smoothed it then with your hand.
• In the final stage of installation, when the installation of lighting fixtures remains( they are installed on special racks, which are not difficult to detect under the canvas), carefully make holes in the places where it is needed.
• Installing the ceiling cap is the last step in the work. Blanket is a masking tape of a variety of colors and shades. It is installed in the gap, between the walls and the ceiling, which is formed due to the thickness of the profile. It is installed simply by the effort of the fingers.

Instead of a stub, a wide baguette is often used.

When choosing a fabric ceiling fabric, the installation is practically the same as the installation of a PVC liner, with the difference that there is no need to use a heat gun, just as the joints of the canvas.

Installation of suspended ceilings construction( video)

In conclusion, it is worth taking stock of what has been said. The installation of ceilings, of course, can be done on its own, as the scheme is simple, which is confirmed by numerous reviews of people who have already done it themselves without the help of masters. And yet, installing a stretch ceiling of any design requires special care and diligence, in order not to damage the film of the canvas. As already mentioned, before this you need to review the relevant materials, in order to avoid all kinds of errors. And, of course, it is worth remembering the fire safety technique when working with a heat gun!It happened differently: a fire, and even an explosion. However, this should not happen if all security measures are taken and taken into account. And again: if you invite a team, check with them the OKVED codes that are given to them when registering an emergency, in order to know if they have the right to engage in this activity. Good luck in repair!