Finishing of the ceiling in a wooden house: photo materials, variants with own hands, plywood and laminate, walls are as good as possible, types are better

For a ceiling in a wooden house, you can use almost any type of finish The ceiling is finished in a wooden house only after the walls are finished. The ceiling can be made with a variety of materials. Excellent laminate or plasterboard. You can also use plywood or veneered panels. With a limited budget, paintwork or false beams made of polyurethane are used.

The best way to trim the ceiling in a wooden house

Experts recommendUse a laminate. This material is durable and does not require special care. Also, the advantages of laminate include its low cost and high thermal insulation properties. You can mount the ceiling coating from the laminate with your own hands.

Before installing the structure, make sure that the ceiling surface is perfectly flat. It is recommended to clean the ceiling of dirt and dust. In addition, before installing, determine the type of lighting. If you want to use the built-in lights, you need to lower the ceiling a little.

The ceiling is laminated and looks natural and harmonious.

Algorithm for installing a laminate on the ceiling:

1. Along the perimeter of the room, fasten the wooden slats.
2. Pull the fishing line between the straps.
3. Fix the frame with metal suspensions.
4. Coat the frame with a laminate. Use nails to fix the material.
5. Lay the second row of the laminate.
6. After installation, screw the last bar.

What other materials can I use to finish the ceiling in a wooden house

What else can I trim the ceiling?For finishing the surface, you can use veneered panels. This material is expensive, however, it is durable and beautiful. You can install veneered panels yourself. Fastening of the construction is carried out with the help of the locking joints.

If the budget allows, it is better to install the ceiling from the array. This design looks luxurious. In addition, the panels for the array are manufactured exclusively from high-quality wood. Installation of the ceiling from the array is carried out in the shortest possible time.

The ceiling in a wooden house can be finished with panels made of solid wood

As finishing materials you can use:

• Plastic panels. These finishing materials can harmoniously fit into any interior.
• Falsh-beams made of polyurethane. This material is useful if you do not want to grind wooden beams.
• Lacquer. If you use this material, you need to pre-sand the surface.

Inexpensive ceiling finishes in a wooden house

If you are looking for inexpensive finishes, then you can use the plywood. This material has high strength. Due to its light weight, plywood can be installed in any home.

Algorithm for installing a plywood on a wooden ceiling:

1. First you need to install a bar. It should be fixed with self-tapping screws. Remember that you need to fasten the beam in 40-50 centimeters steps.
2. After that, install large plywood sheets in the center of the ceiling. Remember that the edge of the sheet and the middle of the slats must match.
3. Align the panel with plywood and secure it with screws.

Plywood lining does not require special knowledge and use of expensive building materials

If you want to paint the ceiling from plywood, do not forget to treat it with a water-based solvent. If you use structural types of paints, then use specialized paints. It is recommended to apply the paint in one layer.

You can also finish the surface with plasterboard. This material is practical and moisture resistant. It is best to install gypsum boards on a special crate.

How to install a gypsum board ceiling:

• Secure the UD profiles and CD profiles. Use a screwdriver to fix it.
• Install jumpers for the CD profile. Fix them with the help of "crabs".
• Start the plating of the frame with plasterboard. It is advisable to use self-tapping screws to fix the blade.
• After you have completed the installation, apply plasterboard and paint to the plasterboard.

We install the lining on a wooden ceiling

If you are looking for an extraordinary solution, you can install a lining on the ceiling. Usually it is made of MDF panels or PVC.It's quite easy to mount the ceiling from the lining yourself.

Layout of the ceiling with plastic lining

Before proceeding with installation, make sure that the roof does not leak. Otherwise, the panels may become deformed. To install the lining we recommend the use of a wooden frame.

Installation of the lining is carried out in the following order:

1. First fix the UD and CD profiles around the perimeter of the walls.
2. Fix the jumpers.
3. Cut the material.
4. Place the lining strip on the ceiling. Fix it along the entire length of the guide beams.
5. The ends of the lining are taped with a rubber mallet.
6. The opposite sides of the strips are attached to the guide beams of the frame. To do this, use nails or self-tapping screws.
7. Remove the gaps between the wall and ceiling using decorative skirting boards. If you do not want to use them, you can use ordinary corners. Decorative skirting boards and corners should be fixed with the help of liquid nails.

Finishing the ceiling with a lining( video)

Thanks to the fact that wooden ceilings are high in wooden houses, almost any material can be used for finishing. The choice of a particular method will depend on your individual preferences and budget. It is recommended to give preference to organic materials. Before finishing the ceiling, make sure that the roof does not leak. Remember that moisture can cause deformation of the structure.

finishing the ceiling in a wooden house: popular options( photo)