How to make a ceiling: both with your own hands, photo, time, video, wave on the ceiling

Due to the wide range of tensioning structures, the owner can choose a ceiling made of fabric, PVC, drywall or liquid wallpaper . Since there are many kinds of ceilings, you probably just need to study the problem using articles or video materials in order to understand thatIt will suit you for one hundred percent. Believe me, there is a choice and it is simply huge. Someone likes drywall, someone is inclined to arrange at home ceilings of PVC panels. Some believe that there is nothing better than liquid wallpaper on the ceiling, while others simply ravish aluminum lath ceiling. So, the question of how to make a ceiling remains open, until you make your final choice.

How to make a ceiling yourself: ways a few

How to make a ceiling with your own hands - ask yourself a question,zhde all those people who are supporters of the budget repair. These people, as a rule, are constrained by narrow limits of insufficient funds, which is not surprising in our crisis time.

By making a ceiling with your own hands, you save a very significant amount.

However, it should not be forgotten that the complexity of performing certain types of ceiling is only available to professionals.

Before starting the installation, it is necessary to calculate the required number of materials for work, to make a drawing, to study the technical documentation for the installation of the

. Having no experience with specific materials and tools, the apartment owner, at times, risks:

• It's hopeless to spoil the material;
• Turn the apartment into an eternal building;
• Spoil your nerves and yourself.

The result, in the end, is disappointing: wasted time, money and, as already mentioned, nerves. Hardly anyone will arrange a similar result.

Nevertheless, the output should be sought at least because there is always!

Yield:

1. Find for yourself that type of ceiling, the device of which is technologically simpler, for example, a wet screed where a solution or mixture is used.
2. Carefully study videos and articles;
3. Consult with professional finishers;
4. Observe the professionals of the finishers.

If with the first two points, as if everything is clear, then the 3rd and 4th are very doubtful. Firstly, not every specialist will share with you his professional secrets, and secondly, not everyone likes when someone stands over his soul.

Types of constructions

There are designs of suspended ceilings, the installation of which is quite simple, and almost everyone can do it.

Types of such ceilings:

• PVC panels;
Wallpapers. Ordinary or liquid.
• Slatted ceilings.

There is one more know-how - the Atlas ceiling. This is a kind of stretch ceiling, only with the difference that for its stretching does not need a heat gun. Such a ceiling can also be made with your own hands. The ceiling can be smooth or textured.

The rack ceiling is a suspended structure characterized by durability, durability, a variety of paints, moisture resistance

You will hardly be able to make at home so-called shallow shagreen - textured plaster. Make a solution for this plaster, apply to the ceiling, and also paint is not so easy, because it requires not only special skills, but also special equipment.

So if you decide to take advantage of these tips, and you have a strong self-confidence - go for it!

Time to make ceilings

Ceilings, as, of course, a finishing operation should be done when all the rough work in the house has already been completed.

Dust and dirt do not contribute to the proper process technology, regarding the finish of the ceiling in particular.

The ceiling, whatever it was, is done in the first place, but after the completion of the roughing of the walls.

Before starting work, clean the work surface used to install the suspended ceiling from dust and dirt.

Ceilings make:

1. Before gluing the wallpaper;
2. After you glue the wallpaper.

The first option is more preferable, because during the installation of a tension or any other false ceiling, it is possible to easily damage( and not once!) The walls. Of course, if you are going to do repairs in the bathroom, then you need to glue the tile to the device, say, a stretch ceiling. If the ceiling will be leveled with putty, it is better to finish the walls later, in order not to wash the tile constantly.

Regarding the time of the year, there are no restrictions, and, perhaps, it is worth while to do during vacation. Thus, there is a double saving: save money at work and on money that is not spent on vacation. And this is if you really want to save - now the fashion for inexpensive repairs and savings in general.

How to make a wave on the ceiling: follow the instructions

First of all, you need to think about the curvature of the future wave.

Scheme for marking the ceiling for a wave of gypsum board

Step-by-step instruction:

1. Drawing a contour;
2. We install the UD-25 metal profile by means of dowels. In order to make curvature of any shape, it is necessary to make profile cuts "Bulgarian".
3. Next, mount completely the skeleton of the ceiling, using the 60th profile, which must be measured and cut to the required length. It all depends on what you need to hide under this ceiling: communications, heat insulation.
4. Using self-tapping screws, we attach the profile, making metal structures.
5. If the calculation of the box is made correctly, lay ventilation, insulation, etc. Will perform quite easily.
6. We put under the wire frame for fixtures.
7. We begin assembling the ceiling: we screw the drywall with self-tapping screws, which should not be saved at the expense of the strength of the structure. In order to close the vertical part of the ceiling, you need to cut into small pieces of the desired width, drywall. It is necessary to make incisions( transverse) and break the gypsum, without breaking the cardboard - so it will be easier to make radii. Before closing this plane, it is necessary to drill the holes for the fixtures and take out the wires.
8. Sew this part of the construction with screws.
9. Shpaklyuem ceiling using reinforced mesh.
10. Krasim.

Following this instruction, you can make the design itself any curvature. If desired, instead of gypsum board use fiberboard, particle board, GVP.GWP - gypsum fiber board, use with success and making floors. This material has no cardboard and is much better in all respects, including quality such as strength, and is more expensive than drywall.

The arched ceiling from gypsum board not only visually expands the space, but also emphasizes the interior style

If necessary, in the plasterboard you can provide a revision hatch that greatly simplifies access to the engineering structures under the ceiling.

In addition, the ceilings are still made of polycarbonate.

Using these techniques, you can successfully make the most, that it is, the creative ceiling. For example, the ceiling is an arch( arch type).

The frame can be made from racks if the room is dry.

Polycarbonate ceilings: a lot of advantages

Polycarbonate is, you can say, an innovative material that has a lot of advantages over other materials for the installation of ceilings.

The interior of any room will be original. The material itself is durable and reliable.

The polycarbonate ceiling has high sound and heat insulating qualities, moisture resistance, unique hygienic properties

The advantages of this material are undeniable because they have many properties. Which is not present in drywall, chipboard, or, especially, in fiberboard,

Advantages:

1. Light;
2. Perfectly skips the light, which is successfully used to create original highlights;
3. Flexible. This quality gives a special scope for the designer.
4. Resistant to temperature changes and chemical compounds.
5. Environmentally friendly.
6. Durable.

In addition to all of the above, this material has noise and thermal insulation properties.

Classical wave of gypsum board( video)

In conclusion, it is worthwhile to sum up some results. What kind of ceiling will you have - volume or simply putty, a matter of your taste and material possibilities. In addition, it is very important to know what types of ceilings can be arranged with their own hands. Many still prefer the other types of finishing wet screed, others - make the ceiling a mirror, so that everything in it is displayed upside down. Everyone sees beauty and comfort in their own way, sometimes, bypassing the generally accepted rules. And the main rule is this: you should arrange everything in your house. Good luck in repairing your apartment!

What do the ceiling( photo)