Acoustic ceilings of the new generation can boast of weighing less foam Acoustic ceilings are a soundproofing system of a new generation. In contrast to the same foam or mineral fiber, weighs much less, has a perforated inner part, which contributes to the absorption of sound waves.
-
- What is acoustic ceiling sound insulation
- Ceiling acoustic panels: the advantages of
- Where can I use acoustic ceilings Ecophone
- What are the types of acoustic ceilings
- Built-in acoustics in the ceiling: the benefits of
- AcousticCeilings: reviews after use
- Acoustic wood fiber ceilings( video)
- Acoustic ceilings( photo)
Acoustic acoustic insulation of the ceiling
Acoustic soundproofing works on the system of absorption of air waves( which arise due to sound) and vibrations in heat by dissonance. In this case, the energy received is transformed into thermal energy. No, this will not affect the overall temperature in the room, since it is about heating in a few milligrade.
Acoustic ceilings offer a wide range and affordable prices
The exterior coating of such panels is decorative. It can emulate both ordinary fabric and glossy film, the same polystyrene, whitewash or even ceramics.
Their key advantage:
- easy installation;
- very low weight of the final design( less than for stretch ceilings);
- high efficiency( acoustic panel absorbs sound in the same way as a 10-cm layer of polystyrene);
- final coating of the ceiling is absolutely smooth and stable to static load.
And such systems as Clipso, are also remarkable for the moisture protection function for the rough ceiling. Also it will be important when installing them in multi-apartment buildings.
Acoustic ceiling panels: the advantages of
The so-called acoustic plates are noteworthy in that it is extremely convenient to mount them. They are multi-layered, they consist of a heater, hydro film, soundproofing, as well as a facial decorative panel. The design is not collapsible, which simplifies installation. Such panels, for example, are manufactured by Knauf. They are widely used in the arrangement of acoustic rooms, for example, in cinemas, in sound recording studios. They are attached to a conventional profile frame, as a suspended ceiling( the difference is only in the location of the transverse profiles).
Panels have a good level of sound and heat insulation of the room
Advantages of acoustic panels:
- higher resistance to static load;
- easy installation;
- multi-layer construction, which ensures optimal sound insulation;
- is relatively inexpensive.
Where can I use acoustic ceilings? Ecophone
Acoustic ceiling from Ecophone, according to the manufacturer, is ideally suited for the arrangement of soundproofing in industrial premises, where the coating must provide optimum stability against the aggressive environment.
Acoustic ceilings Ecophone, in terms of design, are the world leader
Usage examples:
- kitchen restaurants;
- factory for the production of household chemicals;
- freezing warehouses( for storage of food products including);
- those rooms where the ceiling also needs to be mounted electric( air conditioning, lighting).
And what is important is that such built-in acoustics are being made, including in the territory of the Russian Federation. Previously, it supplied Vitebsk( Belarus), but high demand among potential consumers led to the construction of a factory in Russia. Thanks to this, the cost of such products is significantly lower than foreign analogues. However, the manufacturer also took care of the visual component of the proposed acoustic panels and coatings. For example, the Hygiene line uses textured surface emulation. This option can be used in the arrangement of living quarters.
What are the types of acoustic ceilings
The principle of operation of almost any acoustic profile can be conditionally called the same - it is a perforated texture surface, like a honeycomb. Naturally, such a material can be mounted on walls. When is it recommended to use it?For example, if the insulation is carried out in a room that already has an external thermal insulation. And instead of reinforcing the foam plates from the inside with a thickness of 10-15 centimeters, it is better to use thinner acoustic panels. It is worth noting that sound insulation based on the same foam plastic "eats" not a small part of the living space, which is highly undesirable in one-room small-sized apartments.
Otherwise, acoustic ceilings are divided into the following types:
- with hinged panels( coatings);
- with built-in rough ceiling panels.
They differ among themselves, in fact, only a place to accommodate sound insulation. The latter are also conventionally called "sound-absorbing screens", they are cheaper, but they have a black front side. That is, they should be used in those cases, if it is planned to fix a suspended ceiling from the same drywall or foam panels.
Built-in acoustics in the ceiling: the advantages of
It is believed that in traditional apartments it is better to mount an embedded acoustics. It is a normal mat with perforated inner side of PVC( less often - from cellulose and other materials).
Such materials are presented in the form of a fabric with imperceptible perforation. For every square meter, about 250 thousand punctures are made on special laser equipment.
Due to this, the sound wave does not repel, as in the case of basalt soundproof panels, namely it is absorbed and transformed into thermal energy.
As a rule, recessed absorbent screens are sold in rolls, the width of each of which is approximately 5.1 meters, length - adjustable. There are mats that are combined with reinforcing materials, which also contribute to strengthening the base of the ceiling and their protection from the corrosive effects of chemicals, the environment. Naturally, such ceilings can be used for laying in the attic floor( for the arrangement of a residential attic).
Acoustic ceilings: feedback after use
The reviews published in the thematic forums firmly confirm the fact that acoustic ceilings and screens are the best way to ensure a sound insulation of the room.
Special feature of acoustic ceilings is the ease of installation and availability of prices
At the same time these materials are presented not only in the form of panels, but also fabrics, mats. But they work on an identical principle - the absorption of sound waves due to the perforated surface.
The main differences of the acoustic ceiling from traditional soundproof panels:
- less weight;
- less material thickness;
- simpler installation scheme;
- can be used on walls;
- low cost.
Wood fiber acoustic ceilings( video)
Combined with other building materials, including plasterboard, siding, whitewash, paint. On sale there are so-called decorative acoustic panels, which have a textured front. With them, in general, everything is simple - they can be mounted directly on the rough( capital) ceiling without the subsequent finishing. This material will not only isolate the room from noise, but also protect the surface of the ceiling from dirt, moisture.
Acoustic ceilings( photo)
