Mirror stretch ceiling: photos and reviews, material with the effect, installation of the construction with your own hands, installation in the apartment

Mirror suspended ceiling will be a highlight of any room Ceilings with mirror effect look beautiful and help to visually increase the height of the room. To produce a mirror design, plastic panels, slats or glass tiles are used. Installation of the ceiling with a mirror effect begins with the preliminary surface treatment and the construction of the baguette crate. Only after this, the lath is sheathed and installed fixtures.

Ceilings with mirror effect of plastic

mirror suspended ceiling made of plastic is often installed in the bathroom, since ematerial is not afraid of moisture and heat. Plastic panels are installed on a special crate, which, in turn, is assembled from aluminum or polyvinyl chloride panels.

Pull the thread between opposite corners before beginning installation. The line will help you get the level under the installation.

Mirror suspended ceiling made of plastic is often chosen because of its main advantage - resistance to moisture

installation of plastic mirrored ceiling:

1. Set baguette around the perimeter walls. Secure the product with dowels.
2. Attach the cross section to the moldings.
3. After the crate has been assembled, pull the wires.
4. Make holes in the panels for the fixtures.
5. Install the first panel. Begin to mount it from the edge of the room. The panel is fixed in a special groove.
6. Wrap the entire crate with plastic.
7. Install decorative molding and spotlights.
8. Remove the protective film from the panels and wipe the ceiling with a damp sponge.

How to install mirror glass ceilings

The glass mirror ceilings look the most impressive, however, it is very difficult to install such a structure. For the construction of a carcass under mirror ceilings, only steel or aluminum profiles should be used, since glass plates have a high specific gravity.

Before installing the mirror glass ceiling, carefully clean the base surface. You need to clean the whitewash with a spatula, and even remove small irregularities. Slots need to be sealed with putty or acrylic sealant.

With proper self-installing a mirror ceiling, you get a superb and unique design of your bathroom

glass plates to the ceiling mount technology:

• Secure the trim profile and fix it with dowels.
• Install the suspension.
• Fasten the guide profiles to the suspensions.
• Set the transverse profiles and fix them with screws.
• Pull out the wiring. Do not forget to install mortgages under the fixtures.
• Make holes in the glass panels for lighting fixtures and thermo rings.
• Cut the panels of the required length with a grinder.
• Insert the glass panel into the frame, and fix it with screws or dowels.
• Sew the entire frame in the same way.
• Insert the fixtures and install decorative moldings or plugs.

Pinion mirror ceilings

For finishing offices or living sometimes use mirrored slats made from aluminum. They are resistant to high temperatures and moisture. In addition, aluminum slats are mounted much easier than glass slabs.

The rack structure does not require a thorough preparation of the surface. It is enough only to remove large cracks and chips with acrylic sealant. Primer and putty should not be applied.

Mirror rails are slightly easier to install than glass panels

How to install a rack mirror ceiling:

1. Apply markings to the base surface for profiles.
2. Install the wall profiles.
3. Secure the starting profiles and secure them with screws.
4. Install the stringers in the wall profiles. Do not forget to install the suspension over the stringers.
5. Make holes in the roof panels for lighting fixtures.
6. Insert the rack plate into the groove and secure it to the stringer. Similarly, you need to mount the remaining panels.
7. Remove the gap between the tension ceiling and the wall with a cap.
8. Insert the fixtures.

Reviews for specular stretch ceiling

Reviews for specular stretch ceilings vary. Some people argue that the best material is plastic panels, since they are cheaper than aluminum slats and glass slabs.

Mirror stretch ceiling has already received many positive reviews, but for many people this material remains an unaffordable luxury

Vitaliy, 38 years old: "I always wanted to install a mirror ceiling in the bathroom. The budget was limited, so I decided to use plastic panels. Installed the design in just 2 hours. The result was satisfied. Externally, the plastic panels are no different from glass plates or aluminum rails. "

However, there are a lot of negative reviews about plastic panels. Some people argue that such panels are not the best choice, as they are easy to damage, and a lot of dust accumulates on them.

Alexander, 26 years old: "Previously, plastic ceilings with a mirror effect were installed in the bathroom. I did not like them, because they were gathering a lot of dust. In addition, the plastic panels were easily damaged. Recently installed on the ceiling aluminum slats. They liked me more, because they do not accumulate dust, and they look better than plastic.

Two-level mirror stretch ceiling( video)

The mirror ceiling can be constructed from various materials. Each of them has its pros and cons. The best choice is aluminum slats. They are mounted the easiest, and have high strength. Mirror panels made of glass are also good, however, they are difficult to mount. In addition, glass tiles have a high specific gravity. The advantages of plastic panels can be attributed only to low cost.

mirroring stretch ceiling design( photo in the interior)