Photo finishing hallway MDF panels: walls in the corridor, design with plastic, wall paper and trim

MDF paneling has been widely used Recently, it has become increasingly common to decorate the room with MDF panels. And they trim not only the walls, but also decorate the arches, doorways and ceiling. This option is popular not without reason, a variety of types of panels makes it possible to perform any design of the hallway. A huge variety of finishes with the use of panels is amazing.

panels on the walls in the hallway

MDF panels are made from environmentally friendly materials, in fact it is the dust produced from sawdust. Despite such a good natural composition, the panels on the walls are used mainly when decorating the corridor.

Panels on the walls in the corridor have a wide variety in color and texture, thanks to well-chosen color solutions, the room looks chic.

MDF panels - and environmentally friendly natural material

Mounting panels can be produced in several embodiments:

• diagonally in a single color or multiple combined;
• Vertically uniform height or in several panels and in different colors;
• Horizontally with a combination of colors.

Another design solution is the combination of mounting types. The corridor with a horizontal and diagonal way of panel mounting looks very impressive. Panels can imitate a tree or tile, thanks to a special texture creates a visual effect. Care for this kind of finish is very simple - if necessary, it is enough to wipe with a damp cloth.

Types of panels in the corridor

As a rule, corridor walls require finishing with such materials that are easily amenable to wet cleaning. The modern construction market offers a variety of materials for finishing with good moisture resistance.

Preference should be given to the finishing MDF panels coated with a moisture-resistant

kinds of panels in the corridor:

• panels PVC - easy to care for, have different colors;
• MDF panels - the ease of care for a straight line depends on the external coating of the panels;
• Sandwich panels - plastic sheets, easy to clean with plain water and a napkin;
• Tamburat-plates - three-layer plates from MDF or chipboard with cellular cardboard inside;
• Fibreboard, chipboard panels - rather short-lived material, requires a solid foundation of the walls.

When choosing MDF panels as a finishing material, it should be noted that the main difference between panels is a variety of coatings. The most impractical and at the same time cheap are the panels with a paper coating and a drawing on it. More practical and at the same time expensive can be considered panels with a laminate coating or covered with wood veneer. The company EuroLite offers panels matte, glossy and glossy metallic 38 and 50 mm thick.

MDF panels: corridor in the apartment

The walls in the hallway are most susceptible to various impurities. To make a corridor in an apartment is best done with MDF panels. They have all the necessary properties for such a small room. Wall panels allow you to quickly finish.

MDF panels are both square and rectangular

main advantages of MDF panels:

• The panels are waterproof, which allows wet cleaning to be carried out without fear of spoiling the surface of the material;
• There are fire resistant panels;
• The surface of the walls is flat after the paneling;
• Panels increase thermal insulation;
• The thickness of the panels is up to 16 mm, they minimize the square meters when finished;
• They are light enough and do not weight the design.

Undoubted plus is also a variety of color shades, allowing maximum to realize in an interior various design ideas.

The MDF board has two locks for fastening the panels to each other. There is a rare option, where locks are provided and on the ends for splicing along the length. The shape of the panels can have a square or rectangular shape resembling a tile.

Design of the hallway with MDF panels

The hallway design of MDF panels can be made by a combination of various options. In addition to color variants, there are different types of plastic panels:

• Wooden paneling is reminiscent of the rack panels, their thickness is from 8 to 12 mm, height is 2.5-3 meters;
• Mosaic compositions can be created using tile panels, their thickness is 7 - 10 mm, and the length varies from variety to 1000 mm, such panels are good for imitating tiles;
• The largest panels are sheet, their height is up to 3 meters, width is up to 1.5 meters and thickness is from 3 mm to 12 mm.

MDF cork panels have a high cost

Besides, it is not possible to cover the whole wall with panels. Originally looks like a corridor in the house, paneled MDF to half the wall. Variants can be varied, for example - from the top to glue the wallpaper, and from below the MDF cover, or the upper part is covered with MDF wall panels, and the bottom PVC.

The wall panel of PVC is slightly different from MDF, and is cheaper, for a dirtier area of ​​the wall near the floor, plastic panels are ideal if the design is selected in a certain tone.

MDF panels come with 3D relief. Very original they look in the finish of the top of the wall. Modern technologies have made it possible to maximize the diversity of MDF panels not only in terms of color and external characteristics.

This decorative material can be divided into:

• MDFF;
• Conventional MDF;
• Laminated;
• Cork;
• Veneered;
• Fire-resistant.

Conventional MDF is not particularly resistant to moisture and damage. These panels are inexpensive and use them better in dry rooms. Laminated panels have recently appeared on the market, but managed to gain popularity due to resistance to damage. MDFV is a moisture resistant MDF with a protective layer of moisture, thanks to which the panels can be washed with water. Cork panels are quite expensive, a thin layer of cork is applied to their surface. Veneered panels refer to clean ecological materials, a cut of natural veneer is applied to their surface.

Combining wallpapers and panels in the corridor

Corridors with high ceilings require special attention in the design. A large volume must be filled in some way and the output will be the combination of wallpaper and panels in the corridor. This is a popular type of decoration, and it can be easily done by yourself, and the ways of combining materials are pleasing with choice.

An interesting design effect is achieved when combining MDF panels and wallpapers

In addition, you can always experiment and come up with something completely new:

• Horizontal strip combining;
• Vertical strip combining;
• Combining the insertion of wallpaper in some sections of the panels;
• Combination of figures;
• Combination top-bottom, with the panels can be both top and bottom, although it is more reasonable to define the panels down.

With the help of a combined finish, you can realize even very bold design ideas. When using a variety of combination methods, you can create a truly unique interior of the hallway. Joints when separating areas of wallpaper and panels should be decorated with moldings, curbs or friezes.

Modern wall decoration in hallway with MDF panels: photo

MDF panels quite often finish not only walls but also ceilings. This material received popularity for its good finishing qualities. Panels are a good substitute for wood and at the same time it is very well imitated.

Often you can see the finish panels, which can not be distinguished from the wooden lining. For the harmonious design of the hallway, the overall interior of the whole apartment should be taken into account.

MDF paneling in the bedroom is extremely rare

Wall paneling is not suitable in all rooms, and is more often used for finishing:

• Corridor of apartments and houses;
• In the kitchen;
• On the loggia or balcony;
• In the hostel when decorating common areas.

Decorative panels can be partially used when decorating walls in living rooms to highlight some of the design ideas. It is worth noting that due to the environmentally friendly, panel material can still be used for complete wall finishing even in bedrooms, but rarely anyone creates in the space intended for sleeping so office style.

The better the finishing of the corridors of PVC or MDF panels

The market for building materials offers a huge selection of wall panels. It is worthwhile to understand, the better it is to trim the corridors of PVC or MDF panels. Sometimes the differences between them do not play a big role, but still it is worth knowing.

The most common combination is corridor walls made from MDF panels and PVC panels on the ceiling

PVC panels:

• Composed of plastic;
• May be harmful by evaporating substances when heated;
• Costs inexpensively;
• Waterproof;
• Ideally smooth;
• Racks for damage;
• Used for walls and ceilings.

PVC panels have many good qualities, they are well suited for mounting in damp areas and corridors thanks to the possibility to wash the panels as needed.

MDF panels:

• Composed of pressed sawdust;
• Do not harm your health;
• Acceptable price of some types;
• Not all types are waterproof;
• The surface can be as smooth or as embossed;
• Not all species are sufficiently resistant to damage;
• Used for wall finishing, rarely ceilings.

As you can see, panels from both materials are quite affordable, the surfaces finished by them are straight. The color palette is also diverse, with a notable difference being the composition of the panels.

For people who prefer naturalness, MDF panels for finishing the corridor are more suitable. MDF panels are less often used for ceilings and it is quite possible to combine MDF walls with PVC ceiling for the corridor.

Finishing the hallway with plastic panels: design and photo

Plastic panels are one of the options for finishing the walls and ceiling of the hallway. They are widely used in office and residential buildings, they have a lot of advantages. With the help of plastic panels, it is possible to give the surfaces as smooth and decorative appearance as possible as quickly as possible. Installation can be done independently, without resorting to the services of specialists.

Plastic panels - comfortable and popular material for the hallway

The hallway with plastic panels can be combined with other materials:

• Perfect combination with MDF panels on walls;
• It is possible to combine a ceiling from plastic, and walls from MDF panels;
• Excellent combination with wallpaper both in halves on the walls, and the ceiling - plastic, walls - wallpaper.

Quality plastic panels are harmless for health, have high moisture resistance, are strong enough and durable. Panels fit well into the overall interior of the apartment and are perfectly combined with interior items.

How to panel paneling

Panel paneling corridor with their own hands will not be difficult. More often the panels are attached to a metal or wooden lathing, but if the surface of the walls of a flat panel can be fastened without a frame by attaching liquid nails to the glue.

Self-installation of MDF panels is not particularly difficult

Smooth walls are rare, and it is worthwhile to get acquainted with the basics of mounting the frame:

• The rails for the frame should be used at least 20 * 40 mm wide;
• All parts of the frame must be installed using the level;
• The distance between the slats should correspond to the dimensions of the panels.

The wall sheathing must be securely fastened, and the panels on the sheathing should be secured with special hooks - clamps.

For framing the joint of panels with the floor surface, it is necessary to make and fix the floor skirting, and on the ceiling joint the ceiling skirtings.

MDF panels - Corridor trim ( video)

Install MDF panels quite easily and installation does not take much time. The finished result will not be different from the work of professionals, if you observe all the technology and do not ignore the rules of fixing the entire structure. Beautiful walls in the corridor will long please with their external qualities, thanks to good care and durable material.

Design and finishing hallway panels MDF( photo examples)