Aligning the wall with gypsum board: an uneven bathroom without a profile, than can be done except drywall, as correct

click fraud protection

Drywall is an excellent material for wall leveling due to good performance and low price Drywall is an excellent material for wall leveling due to good performance and a small price. For many years specialists have used such material as gypsum cardboard for leveling walls. He deserved many positive reviews, and for good reason. With its help, ideally smooth surfaces are created and this, with its relatively low cost.

    • How to level the plasterboard walls: Advantages and disadvantages of the
    • method Can I lay plasterboard on uneven walls
    • Work order: how to level the walls with plasterboard
    • Recommendations how to level the wall with plasterboard without a profile
    • TipsSpecialist: how to level the walls in the bathroom with plasterboard
    • Than you can level the walls except the drywall
    • Proper wall alignment with gypsum board( video)

How do youovnyat plasterboard walls: the advantages and disadvantages of the method

Masters who are engaged in repair, knowingly choose to align the walls of plasterboard. And it's not just a shallow disguise of bad plaster, but with the help of a properly installed structure, you can achieve absolutely even walls, if they come with swings.

Aligning the walls with plasterboard, it is possible to additionally insulate them with mineral wool Aligning the walls with gypsum boards, it is possible to additionally insulate them with mineral wool

The drywall, like the finishing material, has many advantages and disadvantages:

  • Does not contain toxins;
  • Flameproof;
  • Environmentally friendly;
  • No synthetic additives;
  • Do not use plaster - only a minimum of putty;
  • Easily masks communications;
  • Allows for thermal insulation and noise reduction;
  • Easy to install;
  • Easily cut and bent;
  • Poorly interacts with water - it deteriorates;
  • It is necessary to strictly observe the installation technology in accordance with GOST;
  • Further finishing is desirable;
  • Can not be stored horizontally.

Despite all the shortcomings, it is gypsum board that is the most suitable material for finishing uneven walls.

Is it possible to lay drywall on uneven walls

Of course, it is possible to make the walls even in other ways, but it is gypsum board that is the most optimal material for this task. The main difference is that assembling the frame from the profile and mounting directly the sheets themselves are so simple that even people who do not have skills will cope with them.

Thanks to a metal or wooden frame, you can hide any unevenness of the walls Thanks to the metal or wooden frame, you can hide any unevenness of the walls

Thanks to modern technology, the previously fragile and perishable drywall was transformed beyond recognition.

Now there are several of its types:

  • GKL( simple);
  • GKLO( with protection against fire);
  • GKLV( with protection against water);
  • GKLVO( with protection against fire and water).

This diversity allows the use of plasterboard structures in all areas. True, the bathroom and kitchen decoration is still not recommended - a prolonged contact with water spoils the sheets, and under the influence of steam drywall crumpled. Drywall, of course, has a soundproofing function, but not to the extent that manufacturers claim. Therefore, it is better to build a noise-suppressing material or a heater in the structure, which also damps the sound quite well.

Work order: how to level the walls with plasterboard

Still, drywall is a naughty material and requires a certain sequence of actions. At the same time, it is so easy to install that it is quite easy to wall-cover the walls with your own hands.

When constructing a frame for gypsum board, you need to allocate space for wiring, switches and sockets When constructing a gypsum board frame, you need to allocate space for wiring, switches and sockets

For the work we will need:

  • Drywall sheets;
  • Profiles for ceiling and walls;
  • Self-tapping screws;
  • Level;
  • Dowels;
  • Roulette;
  • Shears for metal;
  • Sharp knife;
  • Direct rakes;
  • Pencil( pen, marker);
  • Screwdriver;
  • Finishing materials.

First you need to make a markup - select the most protruding point, and already start calculations from it. Guides, that is, those that are on the walls of the profiles, are attached at a distance of one meter from each other with the help of dowels.

A ceiling mount straight suspension. It is necessary to check the strength - the design should be well fixed. In the received metal box hide communications, stack noise isolation and a heater. Drywall is cut according to the dimensions, and then fastened with self-tapping screws. The seams neatly shpaklyuyut. After drying, they are treated with a nest, and then the wall can be subjected to further finishing.

Recommendations how to level the wall with plasterboard without the profile

You can also decorate the walls without costly installation of the profile frame. This procedure is much easier, takes less time and spends less money. But strength will decrease, strong irregularities can not be corrected that way. But if there are no big drawbacks, then such a method will perfectly suit.

For leveling the walls with gypsum board without a profile it is necessary to use glue For leveling of walls with plasterboard without a profile it is necessary to use glue

For work we will need:

  • Drywall;
  • Adhesive, for example, Perlix;
  • Putty;
  • Tapes for seams;
  • Primer;
  • Knife;
  • Pencil;
  • Roulette.

Prepare the glue for no more than ten minutes - it quickly freezes. It is applied to the back of the sheet in the form of small piles or strips, and then the sheet is pressed. Remove excess glue. By the way, the position of the sheet can be corrected until the glue is frozen. Seams shpaklyuyutsya using tape. When everything is dry, you can decorate the walls further.

Advice from a specialist: how to level the walls in a bathroom with plasterboard

Thanks to modern developments, there are special sheets of drywall - moisture resistant. Learn them simply by green color. They can be used in the bathroom, but still it is worth remembering that even such a drywall with hydrophobic additives spoils from long and direct exposure to water.

When working in the bathroom it is worth considering several nuances:

  • If the installation is made with a frame, then you need to add another layer of finish where there is a high probability of mechanical damage;
  • When tiling, a two-layer substrate is recommended everywhere;
  • It is necessary to strengthen the waterproofing of the room;
  • Need good ventilation.

When installing the plasterboard in the bathroom, cut the holes in the locations of the cranes and install a small door When installing plasterboard in the bathroom, cut the holes in the crane locations and install a small door

The mounting technology does not differ from the finish in a normal room.

It is worth paying attention to communications. Many do not like that the pipes spoil the appearance of the bathroom. An excellent solution will be the installation of a box from the GKL, which will hide all objects that are objectionable to the eye, but at the same time leave the possibility for finishing, including tiling.

Do the box immediately after installing all the communications. The principle is simple: marking is performed, profiles are mounted, and plasterboard is attached to them. To smooth the joints, sometimes apply soft corners of a suitable color.

Very carefully it is necessary to concern to the further furnish. Even reinforced gypsum cardboard can not withstand too heavy finishing materials, so tiles should not be chosen too large.

All materials must be resistant to steam and moisture, then the finish will last longer and will not lose its attractive appearance.

Treatment of cracks with an antifungal spray can prevent the appearance of mold. It is also possible to treat some surfaces with water-repellent materials.

Than you can level the walls except drywall

Wall leveling requires a special approach depending on the degree of unevenness.

In addition to drywall, there are a number of other materials that perfectly handle this task:

  • Putty;
  • Plaster;
  • Wooden plates and plates;
  • Mixtures based on gypsum( type Rothband).

To level the walls with a variety of defects, plaster is applied, which is applied by a thick layer For smoothing walls with a number of defects, plaster is applied which is applied with a thick layer

The putty is used for local leveling, or for masking minor wall defects - the thick layer will not hold, it will crawl. For larger scale works, Rothband mixes are used - they are like putty on the properties, but they serve for equalization not worse than ordinary cement plaster.

The plaster itself is a proven way of leveling even the most difficult irregularities. To do this, you can use high-quality finish "by lighthouse", that is, using metal profiles.

The easiest way to use so-called "dry" materials, that is, drywall, wood and even siding. They successfully mask the small flaws of the walls, but thanks to the possibility of mounting on the frame will make the room absolutely flat and proportionate.

Do not forget that the material for leveling the walls should be selected in accordance with the further finish. For example, wood panels do not have to be painted or wallpapered - it's enough to cover with antiseptic clear varnish.

Competent wall leveling with plasterboard( video)

Wall leveling with gypsum board is the most optimal and actual option. In addition to the ease of installation, drywall can be purchased at any construction store at adequate and affordable prices. You can choose the size of sheets, thickness, and resistance to water and / or fire, which makes this material capable of application and operation in virtually any room.



instagram viewer