Installation of the toilet: connection to the sewer, proper installation and connection, how to connect with cast iron

The toilet should be installed very efficiently No modern apartment can go without a toilet, but in order for this piece of sanitaryware to function successfully, you need to not only choose it correctly, but also correctly install it in your apartment. Moreover, it can be done both independently and with the invitation of a specialist - the details are below.

Connecting the toilet to the sewer: materials

It is quite possible to install the toilet yourself, soAs any specific knowledge and skills are not needed. Sometimes, with the installation of this type of sanitary ware, fan tubes are also used. Pipe connections must be made using a resin strand. Pakluk, before connecting the pipes, to coat with a marmot.

Usually, to connect the toilet to the sewer, use:

• Corrugated elements;
• Eccentric cuffs;
• Plastic bends.

You should know some installation features. Corrugated cuffs, which are used to connect the toilet bowl to the sewage system, can be bent at any angle, and also stretched to a certain length. If eccentric cuffs are used, they can only be rotated about the axis to compensate for the alignment of the pipes to be connected.

Connect the toilet to the sewage system it is possible with his hands

If sewage pipes are used for the connection, in this case, connect the toilet to the sewage system at an angle or at an angle 30-40ᵒ 90ᵒ, if it does not do so, thenIt is necessary to use adapters.

Next, connect all the pipes together, while ensuring that the parts of the resin pan do not get inside, as this can sooner or later cause clogging of the toilet. The toilet itself after connection is fixed to the floor with the help of bolts and nuts, after that you can proceed to the connection to the water supply. After all the manipulations, you can use the toilet for its intended purpose.

Stages of mounting the toilet

If the toilet is being repaired, it rarely does without the toilet. You should try on a new toilet bowl, check if the old holes match with the mounting holes, if not, then it's worth to drill new ones in the floor. If the new model does not have fasteners, then the toilet can be attached with cement to the floor or epoxy resin. The subsequent installation is done neatly.

For replacement, it is necessary: ​​

• Drain the water;
• Remove bolts;
• Detach the sewer pipe;
• Remove the tank;
• And remove the old toilet bowl.

Before replacing the old toilet, it is necessary to drain the water and remove all bolts

tank toilet bowl 2 secured with bolts with rubber gaskets. Rubber gaskets are installed inside the tank, and the bolts are tightened from the outside. In this case, do not overdo it and do not tighten the bolts too much, since the tank or the base of the toilet bowl on which it is attached can crack.

The toilet is connected to the sewage system using a plastic corrugation or a branch pipe.

The connection can also be made using a branch pipe fitted with a rubber seal. You can also use the additional sanitary sealant. Check the tightness of the tank by pouring water into it, then you should wait a few minutes, check to see if there is any leakage. If everything is in order, then it is necessary to connect the water in a way when flexible liner is used. On a hose or on a pipe between a waterpipe and a tank of a toilet bowl it is necessary to establish a crane for opening or closing of water.

The correct installation of the toilet: instruction

Traditionally, the correct installation of this sanitary product begins with the dismantling of the old toilet bowl and the installation of a new one. A new toilet is purchased, depending on the type of sewer pipe. The drain pipe can be directly in the floor, or maybe a little higher. The toilet bowl is put in place of the old one, and then it is tried for fitting to the sewer pipe.

The correct installation of the toilet should begin with the dismantling of the old

If the pipe is directly in the floor, then the WC is installed simply:

1. It is necessary to purchase a special sleeve that is inserted into the drain pipe, Is one of the fasteners of the toilet bowl. The bushing is also equipped with a special gasket and bolts.
2. The toilet seat is carefully put in place so that its drain coincides with the bushing, and the fixing bolts hit the necessary fixing holes.
3. In some cases, it takes some effort to connect the toilet bowl to the hub.
4. Rubber washers are put on the mounting bolts, then the nuts are tightened, but, again, you need to make reasonable efforts not to overtighten them - so the fastening lugs of the toilet bowl can crack.

After the drain tank is fixed also with bolts provided with rubber gaskets. Gaskets are inserted inside, the tank itself is combined with the drain hole, and then connects to the toilet bowl with bolts. The last stage is the connection of the tank to the water pipe with a flexible hose, after that it remains to check the work of all the plumbing.

How to connect a toilet bowl with cast iron sewerage: nuances

Some old houses used cast-iron sewage pipes. Modern plumbing to connect with a cast-iron pipe is not very simple, but, nevertheless, there is a way out of this situation. First, the old toilet bowl is dismantled, and the bell of the cast iron pipe is cleaned.

When these jobs are completed:

1. It is recommended to close the drain to avoid unpleasant odors.
2. Afterwards, use special nozzles that are installed in place, depending on the design of the drain.
3. On the drain with a horizontal outlet fixed pipe at an angle of 30-40ᵒ.On
4. drain, vertical outlet pipes already mounted at an angle of 90ᵒ.

To connect the toilet bowl to the cast iron sewer, it is necessary to clean the socket of the

Some older models of the toilet bowls and pipes are equipped with an oblique outlet, this connection is rarely used now. For this installation, it is necessary to cover the toilet outlet with a sanitary sealant, and attach the toilet bowl through the pipes to the cast-iron pipe.

The tightness of the entire joint is provided by rubber gaskets and sanitary sealants.

In the branch pipes, for additional sealing, rubber seals must be installed. From above, the joint can be coated with cement and, after it dries, painted. Also, it is possible to coat the compound with a marmalade mixed with linseed oil, after drying, it is dyed.

Rules for connecting the toilet to the water pipe

In order for this plumbing product to work properly, it is necessary to perform not only its connection to the sewer, but also to attach the toilet bowl to the water supply system. This operation is performed only after the entire installation of the toilet, including its connection to the sewage system, is performed.

Normally, the rules for connecting to the toilet water pipe are as follows:

1. The water supply to the toilet should be carefully observed, as in case of any error, water can constantly flow into the tank, which sooner or later will flood the apartment first, And then the neighbors.
2. There are 2 types of piping - it can be carried out from the bottom of the tank and requires a more thorough sealing, and it is lateral, which is most often found in the toilet bowls of older designs.
3. The connection of the toilet bowl to the water pipe is made using a flexible hose.

Connection of the toilet to the water pipe is carried out after the installation of the sanitary ware

The latter option is simpler, it is also possible with the help of a rigid wire that is hidden in the wall. Despite the different types of connection, it is mandatory to use a tap that blocks water. The tap is necessary to shut off water in case of repair work, and also according to safety rules, for example, to cut off water in the event of a prolonged absence of a person in the apartment.

Modern plumbing products are available with different types of drains into the sewerage system, for example, in old-style homes the drain is floor-standing.

Floor drain requires additional connecting elements, as well as certain toilet bowls intended for this type. If other types of drain are used, then it is necessary to use different adapters, special corrugation and other fittings that allow to connect the toilet bowl to the sewage system.

Installation of a drain pipe for a toilet

For connection of a toilet bowl with the water drain, different sealing gaskets, and also hermetic, a special hemp and other auxiliary materials are used. The transition between the toilet bowl and the sewer pipe is usually carried out using corrugations or eccentric cuffs, as well as shaped pipes. The diameter of these products should fully correspond to the size of the toilet outlet.

The transition between the toilet and the sewer pipe can be carried out using the corrugation

Sometimes the connection can be made incorrectly - the wrong corrugation is selected, the sanitary product will be too close to the wall. Before installation, it is best to get acquainted with the construction of these sanitary products. The scheme of connecting the toilet to the sewer can be slightly different, depending on the type of system and toilet. The connection can be made both at a right angle and under the other.

How to connect the toilet to the sewer( video)

Despite the different schemes for connecting this type of sanitary ware, the main thing is that the toilet properly performs its functions. And also served for a long time, most importantly, correctly perform all the necessary operations to connect.