How to make a partition of gypsum board: with their own hands, step by step instructions, as correctly from the GKL itself

Making a partition of plasterboard with your own hands, you will save time and money Having plasterboard partitions with their own hands, you will save time and money Today, it is with the help of drywall partitions can be to zone the room into two or more parts, which is very convenient in large rooms or open-plan apartments. Drywall is used for a variety of purposes, for example for wall sheathing, for ceiling finishing, for partition installation. Such buildings in any room look stylish and modern, especially if you use different design techniques for decorating.

Contents:
    • partition with his hands Plasterboard - drafting
    • Make plasterboard partitions with their hands: step by step instructions
    • How to plasterboard partitions
    • How to make plasterboard partitions: Installation tips
    • advantages of the material: do plasterboard partitions
    • Instructions: how to make a partition of the drywall( video)

partition with his hands out of plasterArton - drafting

Before performing construction plasterboard partitions with their own hands, the project will require the formation of, and for which work will be done.

The project includes:

  • Drawing;
  • Application of exact dimensions;
  • Calculation of the exact amount of fastening material;
  • Calculation of profiles and plasterboard.

Drawing up a project for the installation of gypsum board partitions will guarantee a high quality Drafting installation plasterboard partitions will guarantee high quality

If you plan the installation of several partitions at the same time, then you need to start drawing with the main structure, which will support the rest of the partition.

It is necessary to create a front figure, which depicts the supporting structure, jumpers and even sockets with switches. The question is, why?In order to be able to prepare the material for their transfer to another place in the course of the work. When covering the structure with sheets, it is necessary to fix the edges on different profiles from the frame.

Thus, the load is distributed over the entire area over the frame without overloading. In the drawing, there should be a drawing of how the partition will look after installation. In addition, it is necessary to draw up a detailed plan, which prescribes each stage of the work.

Make plasterboard partitions with their hands: step by step instructions

Sometimes it is impossible to remember every nuance remember them, for example, to install the profile, its lining and the like, a step by step guide is what you need.

Well-designed step-by-step instruction is the ability to:

  • During the design phase, make changes;
  • Eliminate the formation of defects;
  • Follow a clearly defined plan.

To avoid errors in the design of the wall, you must use the laser level To avoid errors in the design of the wall, it is necessary to use a laser level

After the drawing is made for the construction and finishing works in the premises should start marking on the walls and on the floor. For accurate line drawing, it is worth using roulette and preferably a laser level.

Once the marking has been applied, the profile guides must be prepared. Namely, a sealing strip is applied to one of the sides, which will allow to fix the profile as tightly as possible, firmly and without gaps. For installation of profiles it is necessary to use dowels and screws.

The rack profile is mounted at a distance from the wall, but the first one must necessarily adjoin to it. The upper and lower rails are used to mount the racks. If there is a need to increase the soundproofing properties of the structure, a sealing tape must be applied before installing each profile. Once the latest rack-mount profile is installed, you can proceed to subsequent work.

How to make a partition of gypsum board

Before you trim the frame from the profiles you need to prepare GKL linens.

This will require:

  • In the drawing, separate the gypsum plasterboard with the elements;
  • Mark each element on the canvas;
  • Gently cut out the details.

When installing sheets, the material should be applied with untreated edges to the central part of the profiles. Fixation, as was said earlier, is carried out by self-tapping screws.

Before installation from all gipsokartonnyh sheets it is necessary to cut thinning, as each cloth will form butt angles Before installing from all gipsokartonnyh sheets it is necessary to cut thinning, as each blade will form butt corners

The step between the screws should be 3-5 cm and must be the same. Once the first sheet is installed, you can proceed to the installation of the second, and with the greatest possible care, so that joints do not form between the webs.

If the edge of the gypsum board slides off the profile, it can subsequently cause the warps to warp and, accordingly, the loss of the proper design. If it is required to lay the communication behind the plasterboard walls, they should be carried out only in a horizontal position and in a special anti-fire corrugation. In this way, it is possible to prevent fire from closing and naturally the occurrence of a fire.

It is often required to use a heater when installing a gypsum board. The choice of it depends on your personal preferences, as well as on how much strong level of heat conservation is required in the room. Mainly mineral wool and polystyrene foam are used. Expanded polystyrene is a modern product, manufactured by modern technology. It has excellent performance properties and does not lose them even over the decades.

How to make a drywall partition: installation tips

It's not that easy to make gypsum boards, especially if you need to install a door frame. To ensure that the structure is solid and has not lost its stability, it is necessary to approach the installation of the frame correctly. Installation of the door is carried out before the gypsum sheets are laid, and after the support of the partition is installed.

In other words, once all the profiles have been mounted, you can:

  • Mount the doorway;
  • Install the door frame;
  • Mount the blade.

The doorway can be either standard or irregularly shaped. Depending on the chosen design, it is sometimes necessary to make changes to the project, which should be done at the planning stage.

Mounting of clypees on the doorway is carried out after finishing gypsum boards Assembling the clypees on the doorway is carried out after finishing the gypsum boards

This can affect the purchase of material and fasteners. Wherever the door will be installed, the presence of a rack profile equipped with stiffeners is mandatory.

The reinforcement of the door opening can be carried out by means of the guide profiles. Regardless of the choice of the hardening method, the door frame must be as stable as possible. It is worth noting that gipsokartonnye partitions have one particularly distinctive feature. With their help you can hide a significant amount of communication.

Water supply systems, electrical networks are often laid inside the frame of plasterboard walls. To do this, do not need too much action and special equipment, since everything is easy and simple. Naturally, the laying of communications occurs when the frame is installed and before the cladding. When laying water pipes will require additional waterproofing to prevent the formation of rot and mold, which will lead to the gradual destruction of drywall.

Advantages of the material: we make the

gypsum board Before choosing the material for the partition, it is worth to familiarize with a number of advantages of drywall, which in many respects surpasses other finishing cloths.

Drywall is a universal material that has been used for a long time in construction and finishing works Drywall is a versatile material that has been used for a long time in construction and finishing works.

Advantages:

  1. The drywall does not weigh much, so the design does not require the erection of columns or the use of a huge number of profiles with stiffeners.
  2. Gypsum board has excellent load-bearing capacity. On the walls of such material you can attach shelves, flowers and other items.
  3. A competently made gypsum board partition will last for years and will not lose its proper appearance.

Now there is an opportunity to purchase a moisture-resistant plasterboard, accordingly the partition can be erected not only in a living room, but also in a bathroom or a toilet.

Instruction: how to make a partition of plasterboard( video)

Interior gypsum plasterboard partitions can be very different in shape and form, so you can create the most incredible design in the interior of an apartment or a private house. Partitions made of gypsum will cost at a cost not too expensive, which is the main and important advantage.