Water heating convectors are characterized by efficiency and long life Comfortable microclimate in the house depends on three systems: heating, air conditioning and ventilation. To replace the familiar to all devices, new, modern and high-tech devices are gradually coming. This is the case with all technical devices intended for everyday life: fans have turned into air conditioners, fixed telephones into mobile devices, electric stoves with open spirals in induction cookers and heating radiators are slowly giving way to new, modern convectors.
-
- Modern water heating convector: device types
- Wall mounted water convector heating: functions of the
- How it works: water radiator with
- How the convector chooses the size of the room
- Types of water(Video)
- Examples of water convectors heating( photo)
Modern water heating convector: device types
Day, water heating convectors are increasingly choosing buyers for their homes. This device has long been appreciated by rational and practical homeowners, although it was impossible to solve the heating problem beautifully and elegantly 10-15 years ago.
Recently, as a wand-zamchalochka, there were new water convectors, which can both look great, and can not be located there, perhaps, but where we need it.
Modern water heating convectors can be of different design and dimensions
In addition to the difference in terms of aesthetic appearance, the convectors are also different depending on the installation method and design features.
Types of water convectors:
- Floor standing;
- In-floor;
- Plinth;
- Plinth;
- Wall mounted.
Modern water heating convectors, which belong to the floor type, allow to heat a room that has almost any size. These convectors usually have a steel casing, and are represented by positions with one or two built-in heat exchangers working on the principle of self-convection. The heat exchanger must be copper. If you want to buy reliable, modern convectors, be sure to pay special attention to the skirting devices. They are located around the perimeter of the room, and such equipment can provide high-quality air heating at the bottom. In addition, it practically does not occupy a useful area. The temperature of the skirting convectors, usually, does not exceed 30 degrees, therefore, you can place furniture and other things in the immediate vicinity of them absolutely calmly.
Wall-mounted water convector heating: functions of the
The essence of convection in this unit is the spread of heat directly from the heating device in the room through the air. According to the known laws of physics, heated air, from the radiator itself, tends upward, and mixes with the cold one. Then it cools and comes back. This process is constantly updated, so that the room is maintained and the temperature mode is set.
Thanks to the convector, a stable process of exchange of air masses takes place. This process generates a uniform heating of the room air at a low cost of the coolant. This makes it possible to save resources, and allows the creation of a well-coordinated scheme, including the combination of several convectors, which ensure a uniform warmth throughout the house.
When the room is heated using a central heating radiator, there is a fairly large temperature difference in the lower and upper levels of the room in the room. Today, thanks to the efforts of designers, creating a new device that allows to reduce this difference, such a device has appeared.
Wall-mounted water convector is ideal for rooms made in Art Nouveau style or high-tech
It performs the following functions:
- Completely cut off the cold flow of cold air from the windows;
- Forms comfortable temperature in the room;
- Prevents the condensation of moisture on the glass;
- Provides uniform and efficient heating of all, without exception, premises.
If you pay attention to the design of this device, you will realize that it has a big difference with a conventional radiator. Thanks to a well-designed device, all water convectors give the advantage of a higher heating rate of the room, compared to traditional, conventional radiators. This can be explained by the fact that the internal volume of the built-in heat carrier at the convector is 80-90% less than that of a conventional radiator. And effective cut-off of cold air, from the windows allows you to maintain the temperature in one mode. The only drawback of this type of convector is their high price.
Principle of operation of the device: water radiator with
fan The principle of operation of any type of convector heater is based on the laws of physics and air properties to rise up during heating. This is called convection. The device absorbs cold air in itself from below and gives out on the outside, already heated, enriched with warm, through the holes in the upper part of the body.
To increase the efficiency of the convector, and to be able to more quickly heat the air, fans are used. They can significantly accelerate the flow of air, which affects positively the operation of the device.
Wall-mounted models are the most popular in everyday life. However, there are many cases where it is more convenient to use convectors with a fan. There is also an in-floor converter with a fan, which is used in rooms with large areas.
The heated water radiator with fan distributes warm air evenly throughout the room
In general, the convector heat exchanger with fan is used in:
- Shopping centers;
- Office buildings;
- Exhibition Halls;
- Tsekhah;
- Warehouses;
- Libraries.
In private houses, convectors with a fan are rarely used, because they consume a lot of electricity.
How the choice of the convector depends on the room dimensions
The choice of suitable convectors for heating begins even when designing the heating system, at the time of construction or repair of the house. If you are planning a modern renovation, and you will have panoramic windows, then you need to look at the floor convectors, and for earlier to provide niches for their integration. In all other cases, it is possible to dispense with conventional wall models, placing them under the windows and on the deaf walls. If you have an almost open room, then your option is skirting convectors. They have minimal dimensions.
First. When choosing a convector, it is necessary to pay special attention to the power of the device. They are the same for almost all options, and is usually equal to 1 kW per 10 sq. Km. M of useful floor space. In this case, the height of the room should not be more than 3 meters. For each window opening in the room, add 0.2 kW.For solid glazing this rule does not apply.
The height of the device should be increased attention. When installing the device in a floor niche, you must first estimate its dimensions with the dimensions of the opening before starting work. The average parameter is approximately 30 cm. In this case, the material used in the manufacture of the box also plays a role. It should be made of high-quality anti-corrosion alloys.
When choosing a convector, you should consider the use of the room
The power ratio of the appliance to the room heating area:
- 5-6 m2 - 500W;
- 7-9 m2 - 750W;
- 10-12 m2 - 1000 W;
- 12-14 m2 - 1250 watts;
- 15-17 m2 - 1500 W;
- 18-19 m2 - 1750 watts;
- 20-23 m2 - 2000 W;
- 24-27 m2 - 2500 watts.
When choosing an aggregate for your premises, it is necessary to use this scale. The required heat output is calculated in the same way as in the case of conventional radiators, based on 100 watts per 1 sq. Km. M. If we talk about choosing a device manufacturer, then there are some nuances - the devices produced in Russia are very different in a good combination of price and quality. Imported equipment is better, but expensive. As for China, it is not recommended to buy cheap models from manufacturers in this country.
Types of water convectors heating( video)
Today, to replace furnace and central heating, modern solutions to the problem have appeared - convectors. Now, thanks to the variety and versatile functionality, these devices are great for use in any region. Examples
water heating convectors( photo)
