Drainage technology

click fraud protection

Basic parameters of

Basic parameters of the drain

drain This system will work long and well if it consists of pipes with good characteristics and material. Most often, the choice of the material for the drainage system depends on how much surface water, as well as how deep the pipelines will be laid,.Very often plastic pipes with the following materials are used:

  • Polyethylene material.
  • Polyethylene material with high strength.
  • Polyvinylchloride.
  • Polyethylene with low pressure.

Very often drainage systems are associated with the simplicity of installation work and the convenience of transporting elements to the object, such a unit has a high resistance to aggressive environments. The most important and positive factor is the qualitative exhaust capacity of the pipe manufacturing plant, as well as the inspection drainage wells.

Such systems always produce pipes with perforations. It can be either partial or complete with holes accepting liquid. Most often, such systems are laid to a depth of about six meters. The connection of pipelines is carried out by means of couplings, and they, in turn, consist of the same material.

Basic parameters of the drain

When laying the drainage system, it is necessary that the water intake holes are on the sides of the pipe, but it is important to know that the upper and lower part should be without any leakage. This factor must necessarily be checked and in case of leaks, everything must be eliminated and replaced.

Description of the position of the drainage system

Such a system is always laid with a certain slope, with which the water moves independently and has a certain speed. With such technology, soil erosion and siltation of the system is contraindicated. Slopes can be:

  • If the soil from clay is 0.02.
  • For sandy soil - 0,03.

To avoid an increase in work, this installation should be laid with minimal bias, and if it is larger, then the work will accumulate not a small amount, and this will come out more expensively in cash and it will take more time to establish.

If in the pipe, the water velocity reaches the maximum flow velocity, which is allowed for all regulatory documents, then it is necessary to take as much as possible the slope of the drainage system.

Characteristics of the drainage system position

Technological parameters of the

drain The most effective and used method, which the drainage technology uses, is the use of drainage pipelines. Such a system is very often used in suburban areas and in country houses. She can also use geotextile materials.

The corrugated pipe itself is made of PVC materials, with which, the inner surface of the pipe and its holes are very smooth and calmly produce water. The dimensions of the holes range from 1.5 to 5 millimeters. More often, the shelf life of such a system is about 50 years.

This installation helps to protect against soil erosion by any water, superficial or rainwater, and it does not give life to poor-quality organisms such as mold and any kind of fungi that can develop.

Technological parameters of the drain

Basic parameters of the drain device:

  1. The depth of the installation depends on the straight line, from the constituent soil.
  2. The diameter of the drainage system depends on the area of ​​dehumidification. The pipes with a diameter of 100 millimeters are most often used.
  3. The drainage pipeline will have apertures of about 1.5 millimeters and a number of positive possibilities:
    • Depth at laying about 5 meters.
    • Such an installation has stiffeners with which soil load is evenly distributed over the entire length of the pipe. Shelf life is absolutely unlimited.
    • During assembly processes, they are easily cut by any materials that are available.
    • Very easy to carry. Their mass is 50 meters in length.
    • Polyvinyl chloride pipes are much better and better than conventional polyethylene pipes.
    • More holes that help to quickly take, dump and discharge the drainage drains.

Installing such a drainage system can be assured of its durability and quality of operation. It is possible to purchase already ready-made, and you can make them independent forces. But, it is worth remembering that pipes that are made of geotextile material are produced only by the manufacturer's factory.

Technological parameters of the drain

instagram viewer