Floating ceiling: photo, profile for ceilings with illumination, design, hidden lights, video

Arrangement of the floating ceiling will hide the defects of the base and give the room an unusual appearance The stretch ceiling is not the only way to make it a soaring version. The fact is that this ceiling can only be installed by masters, but a suspended gypsum plasterboard ceiling, for example, can be made by hand.

Construction of floating ceilings: 6 steps in the

installationpasses Ceilings stages. An example can be summarized in six main stages. Depending on the design, there may be more.

The design of the floating ceiling involves six basic stages of installation:

The stages of the ceiling installation:

• The first is the preparation of the surface of the rough ceiling( puttying, priming, laying of communications);
• The second is measuring and creating a drawing of the future design;
• The third is the fastening of profiles for tension ceilings, as well as suspension structures of all levels;
• Fourth - installation of lighting;
• The fifth - the installation of the canvas with a mark of the places of fastenings for the subsequent level;
• Sixth - output of fixtures to the outside, fixing of plugs, installation of suspension elements.

As you can see, the line of work is quite logical and technologically not very complicated.

Types of floating ceilings

Varieties of soaring ceilings are very similar to those of gypsum plasterboard ceiling structures. And this is not surprising, because the principles of construction are very similar.

Single-level floating ceiling is a simple design that can be easily made by hand to a skilled home master.

Types of floating ceilings:

1. Single-level are simple structures built in a single plane,;
2. Two-level and three-level ceiling - first you need to make a frame, then attach to it a second-level and third-frame( if there is a third one);
3. Multilevel - more complex designs, their features will be in the mount, because they can not be fixed around the perimeter, so that the same flight effect.

The choice of materials is important for the floating ceiling, from it, in fact, depends not only the strength of the structure, but also the future design.

Profile for floating ceilings and other materials

The construction of the floating ceiling consists of both main and auxiliary parts.

In a number of basic materials will be:

• Fabric or film( if it is a stretched floating ceiling);
• Fasteners;
• Special profile, especially flexible, to lay the backlight tape and the fastening of the blade;
• Masking semi-transparent tape;
• LED Light Strip.

ASD11Additional baguettes, etc.

Separately it is necessary to say about the profile. It is such an aluminum baguette with an inclined groove, which, in turn, is set up with an LED strip. A big plus of such a profile is that it is perfectly used on curved sections. And the lighting only wins, because the LED backlight in this case is quietly dismantled itself, without affecting the tension structure.

Floating ceiling with illumination:

features The power supply should be installed exactly in the range of the remote control, if such is, of course, available. It is not necessary to glue the diode tape itself, it can simply be inserted into a special groove. And the ends of wires at a tape and the power unit to clean and connect it is necessary habitually. Do not forget, of course, to wrap a layer of electrical tape on top.

The installation of the LED strip is done at a certain angle, which will create an optimal level of illumination

The brightness of the tape itself will depend on the number of diodes per meter. For example, at a voltage of 12 W, their number varies from 12 to 30, and if the power supply is 24 W, the diodes can be up to 240, and they will be located in 2 rows. On average, there will be enough of 30 pieces per meter.

And after the tape, but at the same angle, you attach a translucent insert with a special layer, translucid. The fact is that this material has almost complete light-penetrating power, but as a frosted glass, it disperses the rays. As a result, you get a soft light, and uniform lighting without any sharp shadows.

Hidden lights in the floating ceiling

Due to the backlight, the same air effect is created. It is achieved by highlighting the technological gap along the entire perimeter of the room. But just fitting the LED tape into this gap will not do anything, you will only ruin the look of the ceiling and even make its structural elements noticeable.

You have the illusion that the sky has appeared in the interior;

If the ceiling design involves hanging elements that create other levels, there will be an impression that the ceiling literally soars, or rather - the impression is even stronger, and the light helps;

Neon lighting for many is preferable, as it really creates some kind of magic light.

With all the confidence of the master say that the very design of the ceiling does not represent anything special, but it turns out to be so because of the play of light.

Reviews of floating ceilings

Among the many reviews, you can identify the most positive points. What do the owners of the apartments note with soaring ceilings?

Advantages of construction:

• Installation of such a ceiling does not take very long;
• LED backlighting, the insertion of which is mandatory, is not expensive;
• Excellent these ceilings in rooms with curvilinear outline of walls;
• The illumination around the perimeter not only visually increases the size of the room, but also raises the ceiling;
• The soaring effect creates a special comfort in the house.

Well, despite the fact that many of the lights work today on the remote control, you can change the lighting in the room, literally without getting up from the couch.

Floating suspended ceilings( video)

Floating ceiling is a convenient option and hide all the defects of the base ceiling, and build something durable, and the ability to manage everything in a completely budgetary version.

Good choice!

Tensioner soaring ceiling( interior photos)