Plinth for stretch ceiling: types and photos, crevices between the ceiling and the baseboard, which is better, rubber, what is needed, video how to choose

decorative moldings used for decorative stretch ceiling decorative moldings used to frame the stretch ceilings. This element is decorative. With the help of a ceiling skirting you can hide any defects in decoration and decorate the room. When choosing a ceiling skirting, you must pay special attention to the material from which it is made, because some models can not be installed in rooms with high humidity. Also, when selecting a product, pay attention to its color scheme.

How to install moldings for ceilings

finishing the ceiling starts with the installation of the floor. For the installation you will need a knife, a construction tape measure, a chair, a spatula, a cord, a pencil. Before installation, cut a piece of skirting board of the required size.

Initially, you need to form an angle. After this, take the padded cord and mark the place for installation.

decorative moldings secured to the ceiling by means of finishing putty

Algorithm mounting a plinth on a ceiling:

1. Start gluing the plinth at one corner. Fasten the product with a putty or special glue solution.
2. Fill the formed slot with a putty.
3. Stick each part of the skirting board to the back. Do not forget that you need to smear the joint with glue. So you will ensure high strength of the structure.
4. Remove any excess adhesive with a spatula.
5. If desired, decorate the skirting board with backlight.

How to eliminate the gap between the stretch ceiling and the plinth

Often during the finishing of the ceiling there are crevices between the canvas and the skirting board. They need to be eliminated without fail. When choosing the method for removing the slit, be guided by the size of the defect.

The gap between the ceiling and the baseboard can be removed with:

• Acrylic sealant. It must be poured into the gap.
• Putty.
• Inserts from a piece of plinth.

eliminate the gap between the skirting and the canvas stretched ceiling, you can use an acrylic sealant

If you intend to use an acrylic sealant or filler, it is desirable to widen the gap. For this you need to use a hacksaw. It is desirable that after the expansion of the gap, the defect has a V-shaped configuration.

Which skirting boards should be used for stretch ceilings

? It is best to use a plastic or foam plinth. These products are the most durable and inexpensive. In addition, these kinds of skirting boards can be easily installed.

The advantages of the foam plinth include:

1. Beautiful appearance. With this product, you can give the room an extraordinary or presentable appearance.
2. Low cost. Foam plinths on a pocket to any person.
3. Simple installation. Attach this design can even beginner.
4. Ability to install a baguette on gypsum plasterboard ceilings

It should be noted that foam products are very fragile. In addition, such plinths are inexpedient to use if the surface of the ceiling is uneven. Also foam products can be deformed under the influence of some chemicals, so they are difficult to look after.

decorative moldings made of PVC is environmentally friendly, has good ductility, durable

decorative moldings made of PVC has the following advantages:

• high densities. Due to this, the product is not subject to rapid contamination.
• Durability. On average PVC skirting boards serve 5-10 years.
• Variety of colors.
• Resistant to aggressive chemicals and detergents.
• Ease of installation and dismantling.
• Environmental cleanliness of the material.

Disadvantages plinths PVC include:

1. small size of the curb. This is critical if you are going to install the product on high walls.
2. The impossibility of using skirting boards when finishing narrow ceilings.
3. Insufficient flexibility of panels.

We install a rubber plinth for stretch ceilings

The rubber plinth looks attractive. Usually it is used as a decorative element when decorating ceilings in rooms with high humidity. If you need a ceiling skirting in the bath, it is advisable to choose a plinth of rubber.

Rubber skirting boards are produced in only two colors: black and white. In case you need to purchase a ceiling skirting for finishing a bright stretch ceiling, you can make molding yourself.

mount rubber skirting to the tension ceiling is carried out by means of special grooves

Installing rubber skirting at the ceiling:

• Insert the plinth into the groove.
• Lightly press the molding until it clicks into place.
• With the help of a spatula, you can fix the places where you skewered the plinth.

What skirting board is needed for curved stretch ceilings

What skirting boards are needed for finishing curvilinear structures?In this case, you need to use a flexible extruded plinth. Such products have a similar cross-section and relief.

If you use a flexible ceiling skirting to cover the eave, then it must be attached to the ceiling with a screwdriver. Do not forget to install plywood strips on adjustable suspensions.

When installing the flexible skirting boards take into account such nuances:

1. glued products only to the walls or ceiling duct.
2. For fixing use only water-soluble compounds.
3. Local clearances between the flexible plinth and the ceiling should be removed with acrylic sealants.
4. Before installation, do not forget to paint the profile.

Polyurethane skirting for stretch ceilings: features and installation

Polyurethane skirting has become widespread. Such a product has high flexibility, so that it can be used to finish curvilinear structures.

flexible polyurethane moldings retain their properties at any temperature, and does not require special care

Skirting boards made of polyurethane can be used even in unheated rooms. Products do not deform under the influence of low or high temperatures. Also skirting boards made of polyurethane are unpretentious in the care, so they can be used for finishing the stretch ceiling installed in the kitchen or balcony.

Algorithm for mounting skirting boards made of polyurethane:

• First you need to mark the surface.
• Then, adjust the angle of the skirting. To do this, you need to use carpentry.
• Apply a glue solution to the back of the skirting board.
• Press the plinth against the ceiling.
• Repeat the procedure until you have installed the products around the perimeter of the room.
• Remove adhesive residues with a spatula.

Is it always necessary to ceiling moldings Stretch ceilings

Can I do without ceiling moldings?Experts believe that a good alternative to ceiling skirting boards is a stub. It allows you to hide the gap between the stretcher and the wall.

Driving trim ceiling plinths in Miter

If you want to make a visual distinction between the stretched canvas and the wall, you can use a tissue flap. It is an ornate cord, which is made of synthetic materials. You can install such a plug by pressing the part into the groove of the profile.

For finishing ceilings can also be used:

1. L-shaped corner joints. It's quite easy to install such a detail. You just need to snap the plug into the groove.
2. T-shaped plug. It is used if the walls are tiled. The method of mounting this product is the same as for the L-shaped plug.
3. Connector. Such a plug should be used to mask the gap between walls and curvilinear stretch ceilings.

decorative moldings made of wood for ceilings

decorative moldings made of wood is often used for decoration, designed in a classic style. Such products look chic and can decorate any room. However, wooden skirting boards have significant drawbacks.

Fastening wooden skirting boards on the ceiling produced using screws

Cons plinth of wood:

• hygroscopic. The tree absorbs moisture, so it can be deformed.
• Wooden skirting boards are rotting.
• Fire hazard.

Installation of a wooden skirting board must be started with marking. It is advisable to beat it off with a paint string or outline it with chalk. Do not forget to set short bars after marking.

Fitting Algorithm decorative skirting board of wood:

1. Adjust angle skirting using miter box.
2. Nail the baguette against the wall.
3. If you do not want to nail the baguette, use the screws. Do not forget to drill holes beforehand.

Installation of ceiling moldings( video)

When selecting skirting boards for finishing stretch ceiling take into account the peculiarities of the construction. If you installed a curved stretch ceiling, use extremely flexible products. In other cases it is possible to use skirting boards made of polyurethane, plastic or foam. In rooms with high humidity, for example in the bathroom, it is more appropriate to use rubber products.