How to make a wardrobe yourself

The problem of free space and orderly space exists in every home. The dressing room is the dream of every woman and it is possible to realize it even in a small apartment. To make a wardrobe by yourself is not difficult, it will take a little imagination and skillful hands. The positive moment of erection of a wardrobe closet is the recycling of old boring furniture and the appearance of an empty space in the apartment.

Materials for a wardrobe, a variety of materials are used. It is required to erect a partition in a suitable place for it, to install a door and shelves for things. When doing the wardrobe of the compartment with your own hands, you should think over the design and location so that it naturally fits into the overall interior of the room.

Selecting a location and marking for the

wardrobe. Thoroughly inspect and measure the likely places for arranging the wardrobe in the apartment. Pay attention to the pantry, the dead end of the corridor, the angular spaces in the large rooms, etc. On the diagram, mark the places for shelves and racks for things, the design should provide easy access to stored clothing.

1. Draw an approximate drawing on paper and decide on the materials. For the dressing room, drywall, laminated chipboard, plastic paneling MDF wall panels, OSB or other suitable materials can be used.
2. On the walls make a vertical layout of the future partition of the dressing room, checking with a plumb or level. Join the lines on the floor and ceiling. The doors have an important function, they can be made standard or sliding.

Arrangement of a wardrobe in the dead-end space of the corridor

The dead-end space of the corridor is ideal for equipping the wardrobe. You already have three finished walls and a ceiling. It remains to make a facade partition and a door. Materials for piercing are very diverse. Even better, if you change the closet for the dressing room.

1. Make markings on the walls, ceiling and floor for mounting the partition. The frame of the partition is made of a beam with a section not less than 4x4 cm, and a special profile is used for gypsum boards. Doorway, make a calculation of 90 cm in width and up to 2 meters in height. The remaining area is sewn with a square cell with a step from 75х75 cm to 1х1 meters.
2. The door opening is cut beforehand. In the upper part of the opening at the corners, small holes with a diameter of 8 - 10 mm are drilled. Longitudinal and transverse cuts can be made by electric jig saw. Cut out for the doorway sheets, you can use to make doors. The door to the wardrobe closet, you can make glazed, sliding. Thus, the place is saved and an additional light source arises.
3. A sheet of particleboard or OSB, has a fairly large dimensions of approximately 2800x2070 mm. Two such sheets, enough to cover the opening completely, four - to seal it on both sides. On the chipboard or OSB, the wallpaper is easily glued, the plasterboard requires puttying and painting.
4. It is important to correctly plan and install shelves, racks and racks for hangers on which clothes are hung. Mobile stands and racks are much more convenient than cabinet furniture. Any properly planned dressing room is divided into two parts. On one side is attached the bar for the shoulders, and on the other hand the shelves for the things.

Arrangement of a direct wardrobe wardrobe in the room

A straight wardrobe in the dressing room in the room is slightly more complicated. It is best to place it in a corner, then you will have two fixed rear walls. The construction attached to them will be much more stable and stronger.

1. If the apartment does not have a suitable corner for arranging the built-in closet with your own hands, you can make a direct cabinet in the room. To do this, mount the frame - the base of the dressing room and fix it with screws to the floor and wall. The wall itself will perform the functions of the back wall. Side walls of the wardrobe wardrobe can be made from chipboard. This will solve the issue of finishing works.
2. Facade side - can be made with sliding doors. Buy accessories and fixtures in the furniture store. These are two guides, upper and lower, rollers fastened directly to the door leaf, handles and stoppers. The door can be decorated with mirrors. Sliding doors of such a closet compartment, open full access to the items placed in it.

Arrangement of a corner cabinet from plasterboard

Correctly arranged corner cabinet wardrobe will save space and order space. Gypsum board, easy and convenient in processing material. It is not difficult to build such a cabinet with your own hands, and material costs are minimal.

1. A good solution is to equip the corner cabinet with your own hands. To do this, you need to erect a facade wall and equip the entrance. To arrange a facade partition of gypsum board, you will need two types of profile. Rack, it is used for vertical racks and has dimensions - 50x50, 50x65.And the guide, you will need it for mounting the doorway and jumpers. The profile size is 50x40 or 65x40.
2. The standard size of 2.5 g / m2 wallboard. For facade wall plasterboard, the preferred thickness is 12.5 mm. Thin dimensions are used for ceilings. Drywall is easily cut with a knife on plasterboard and fixed with screws to the profile frame.
3. After the marking has been done, the guide profiles are fixed to the floor, ceiling and walls. On one meter of the profile, three dowels are used. They are fastened vertical riser profiles, and a checkered base is made of guide profiles, with a side dimension of 65-75 cm. To strengthen the doorway, you can have a wooden beam in the profile.
4. To begin with, install and secure whole sheets that do not require adjustment. Tighten from the corner, self-tapping screws with a pitch of 250 mm. Heads of self-tapping screws are "dipped" by 1 - 2 mm. Starting putty, tap the joints of drywall sheets and the place of screwing the screws.
5. Angled joints and abutments to the wall, filled with a plastic corner profile or reinforced mesh of fiberglass. The wall of the corner cabinet shpaklyuetsya finish shpaklevkoi, polished and painted. If desired, you can wallpaper the wallpaper.