Step-by-step instruction for assembling the cabinet of the compartment with your own hands

The wardrobe is a versatile piece of furniture that allows you to organize space and save a lot of space in the apartment. The process of assembling the cabinet of a compartment is quite complicated and without knowing some of the design features and technological features it is indispensable. Masters - furniture makers, have the skills in assembling the cabinets of the compartment, and the price is not taken for the work.

Having step-by-step instructions for assembling the compartment cabinetand the scheme of its construction, you can undertake such work yourself. Preview the video on how to assemble the closet.

Selecting the space and measuring the room for the installation of the

1. coupe. All the furniture is made with perfectly straight angles, which can not be said about the floors and walls in our apartments. Therefore, armed with a plumb, square, roulette and water level( water level), measure, the prospective places of installation of the wardrobe compartment and choose if not perfect, then at least close to the ideal place.
2. Measure on the paper, making a small plan. The distances between the walls should be measured both at the bottom and at the upper level. Visually inconspicuous construction flaws, can manifest themselves when mounting the cabinet of the coupe and spoil all the work.

Step-by-step instruction for assembling the

coupe compartment. Installing the

1. base. Works on assembling the cabinets of the compartment with your own hands begin with the installation of the base. The compartment compartment - on low adjustable legs is convenient in that an ideally horizontal plane of the base can be obtained by calibrating the screw regulators on the legs.
2. End-to-end design of the legs, allows you to easily adjust the bottom. The disadvantage of this bottom is a gap of about 25 mm, into which garbage and dust can get.
3. Higher adjustable supports, covered with a decorative panel bar. It gives a more aesthetic appearance, but its installation makes sense with a perfectly flat floor surface.

Body features and stiffeners

1. Fixing the side walls with confirmations, pay attention to the stiffeners. It is on them that the stability of the entire structure depends. An important point - the back wall experienced masters assemblers are fastened with screws, and do not nail.
2. The reason for the swinging of the compartment cabinets, in the absence or incorrect installation of the stiffeners. Their role is played by transverse ties in conjunction with the rear wall wired with fiberboard sheets.
3. Simultaneously, vertical partitions and the roof of the compartment are installed for confirmations.
4. The diagram shows that when assembling the cabinets of the compartment the transverse ties are fixed with the confirmations in each section separately and at different levels. This is necessary to ensure adequate rigidity throughout the entire height of the cabinet. In the central part there is one continuous unified screed.

Installation of shelves considering the center line of the

1. framework As a rule, the installation of the shelves does not cause great difficulties during the self-assembly of the compartment cabinet. Often they are located in separate sections at different levels.
2. With the axial arrangement of the shelves, a corner furniture bracket is placed. It connects the vertical intermediate wall and the horizontal plane of the shelf.
3. For symmetrical fixing, corner joints are added from both sides of the central axis of the mounting partition.
4. There is another method of securing the shelves on the central partition of the compartment - "helicopter".This is not quite a standard method of fastening, which consists in fixing one shelf to a confirmation in the center, turning the shelf in an axis by 90 °, the adjacent shelf is attached to two confirmations. Then the regiment returns to its original position and is strengthened by the furniture tightening corners.

Assembly and installation of doors of the compartment of the compartment

1. The installation and mounting of the doors of the compartment cabinet are the final and most important stage of installation. The facade, the front part sets the overall visual picture for the wardrobes of the compartment.
2. Mirrors are attached to the front of the door leaf. For the label, a film of the "Orakal" type is used that adjoins the whole plane of the mirror and, if the mirror breaks, it will not allow the fragments to scatter.
3. Horizontal profiles are set. In the case of a tight fit of the profile in the groove, you can gently pry the kyankoy.
4. A similar process is performed with vertical profiles, and knobs are installed.
5. Next, rollers are installed, and the whole structure is fastened with lingering furniture screws.
6. On the upper part of the doors a horizontal and vertical door profile is assembled using the assembly screws and a roller is installed.
7. The lower part is going even easier. Install the roller in the groove for it and fix it with screws.
8. A guide rail is installed in the upper part of the cabinet opening. It is fixed strictly flush with bulkheads.
9. The lower rail is somewhat recessed into the depth of the cabinet. Verify that the control measurements are set vertically and horizontally using the spirit level.
10. The final touch is the installation of the stopper and fixing the compartment cabinet to the walls. In the upper parts of the cabinet of the coupe, metal fasteners are fixed with self-tapping screws and fix the structure on the wall.

The sequence of assembling the cabinets of the compartment is approximately the same for all types of this type of furniture. The assembly of the corner cabinet of the coupe is no different from the assembly of the built-in closet. Such cabinets are more stable due to the construction of the base and additional supports on the walls. Instructions for their assembly are widely presented in the photo on the Internet.