Ordering a project and erecting a bath in a specialized organization is rather expensive. Even with the most conservative estimates, it will cost at least 320,000 rubles. If all the technological operations are carried out on their own, then it will be much cheaper. What should be taken into account, how can you rationally save on the construction of a bath - the reader will learn about all this from this article.
Bath project
If you do not arrange a whole bath complex on the territory( construction in 2 floors with guest rooms, a billiard room, a garage, etc.), then for the adoption of procedures it is enough to build a bathhouse of logs ranging in size from 3 x 4 to 5 x 6(m).For an individual site - a very acceptable option.
If you decide to buy a finished project, it's much cheaper to stop on a typical version. In any specialized firm, there are enough of them, as they say, for every taste. It is enough only to visit several different offices( and in many cities, such services are provided by many organizations), choose the best ones, compare prices and purchase.
A small bathhouse, which is not distinguished by any constructive difficulties, can be built without a professional project. On our site in the section "The bath with our own hands" many different recommendations for independent construction. For a person with an education, it will not be possible to deal with all the nuances of labor. You just need to spend time, and you can do without the services of professionals. Bath is not such a "strategic" object, where special knowledge is needed.
The foundation of the bath
In the private sector, it is generally accepted to target the tape. For a 3 x 4 log house you will need:
- Concrete solution - 7,5;sand - 1,5( m3).
- Bar - about 178 m.
Plus to this - insulation, waterproofing. The total cost of erecting a shallow tape will be approximately 50,000 - 60,000 rubles.
Log house
Natural moisture blanks are much cheaper. Like - the best option. But if you consider all the nuances of self-drying the tree, then this is not the best solution.
- First, you need a place to store.
- Secondly, it will be necessary to deal with many additional measures - organize sheltering of stacks, correctly place blanks in them, ensure high-quality ventilation and so on.
- Thirdly, this will take quite some time.
- Fourthly, practice shows that the independent organization of drying of wood does not give that quality of a material, as a production cycle.
It is advisable to purchase already dried wood. Here, savings in perspective, since even such samples are more expensive, but their useful life is much higher. Consequently, you do not have to often engage in caulking, replacing rotten articles and other types of repair.
For the lower crown it is better to buy larch. For walls, you can choose cheaper wood - fir or pine.
Roof baths
For a bath, there is enough single-deck construction. In this case, you do not have to mount the rafters system and spend money on materials. As a coating - metal profile, slate, welded products. They are inexpensive, and taking into account the dimensions of the roof such a roof does not require serious financial costs. Detailed construction of the roof of the bath is described here.
Finishing, communication
Data - approximate, in rubles.
- Furnace, chimney system - about 23 000.
- Insulation - within 4 000 - 5 000.
- Floors - 14.
- Caulking - 15.
- Internal equipment: benches, shelves, lockers and so on - 5 000 - 8 000.
- Cladding with lining - 15 000.
- Consumables - 10 000.
- Organization of connection to the supply line, water supply - up to 14 000.
What else can you save:
- The way of "cutting".To some, the difference does not seem very large, but here you can contribute some share in the overall process of saving. For comparison( for a bath 3 x 4): a frame in a paw - about 55 000, in a bowl - about 70 000( rubles).
- Choosing a place for a bath. The closer it is to the residential building, the fewer difficulties are in the supply of water and electricity, drainage communications.
- Selects the optimal diameter of the workpieces. There is no sense in purchasing, for example, logs of greater thickness than necessary, taking into account the climatic features of the region. It is more expensive, and stacking, fastening them is much more difficult.
