Fishing in a friendly company and a Russian bath away from civilization - what could be better. And this is not a dream, and not a dream. This is a reality that can be done with our own hands.
The project of a bath on wheels
The idea of a mobile bath appeared in Russia more recently. Now a hiking bath is considered a luxury, for which you have to pay serious money. In large cities, business is established. By order comes to the agreed place an auto-steam room with a beautiful picture on board, which depicts a steamed broom and a mug with a beer cap. However, the price of such a service is prohibitive. After a certain time, the bath leaves. For fans of several visits to the steam room, this service is not good. It is better to make your own bath on wheels, which can be used in the suburban area as stationary. If necessary, attach it to the car and drive out of the lake, for example. Not in the place of walking distance, but for a few hundred kilometers. So you can ensure a full rest in any place. Alternatively, convert an old truck to a steam room, and rent it to your friends and neighbors for a fee. Also a good business. So we'll figure it out than a bath on wheels better than a sauna on black with their own hands or a bath of logs with their own hands.
Benefits of a sauna on its own wheels
A good autobahn can not be compared to the field-field simulation of it, which is offered by cunning businessmen. A steam generator in a tent is not a bath. A place for washing and inhaling wet steam. For this in the production of pay for the harmfulness, about what health can we talk about?
A real bath on wheels, smelling of natural wood, with a stove and separate washroom, or a shower booth - that's what you can do with your own hands and without much expense.
There are many pictures of such baths on the Internet, in the most unusual variants: in the old bus Pazike, Gazelle or truck. It is noteworthy that all these designs are not inferior to traditional, stationary baths. Work head and hands will, but all labor costs will be repaid a hundredfold.
The project of a bath on wheels
First of all it is necessary to make a sketch of the future bath. What and where will be located, how correctly to distribute the load on the suspension of the car. Calculation of the center of gravity and permissible weight load during the movement of the machine can be done in a special program that will prompt the correct solution and indicate the permissible mass of building materials in each place of the future bath. It is necessary to take into account the capacity of the furnace and mount it in accordance with the requirements of fire safety.
Construction of baths on wheels
A similar project is quite suitable for the construction of a sauna on wheels
When traveling on roads in Russia, the hull of the bathhouse will experience a sufficient load. And outside the city - even more so. The pitching should not lead to the fact that during the trip the fixtures are loosened and the internal structures move one another. Therefore, it is so important to calculate the distances between the main centers of gravity: the furnace and the regiment. They should be located in such a way that the van does not fall to one side. Counterweight to the main centers of gravity are: grating on the floor and a fit.
Installation of the sauna at the site of the temporary disposition
After reaching the place, the trailer with the bath disengages from the car. To strengthen the bath you need to have a foot on hand. It is immediately supported by a platform, then additional supports should be added. So that the trailer does not swing, such supports will need four. After that, the rim on the trailer reclines, and the ladder is lowered down, which acts as a ladder. The whole procedure takes no more than a quarter of an hour. Collecting a bath-house can take an hour.
For reliability, the bath should be reinforced with additional stiffeners. They are made of metal profile.
The layout inside the bath is at the discretion of the owner. With sufficient space, there is the possibility of dividing the room into two sections: a steam room and a rest area.
Installing the
furnace The furnace top should be located outside. This situation is more convenient and safer. Inside the premises there will be no need to store firewood, and smoke emission will occur outside. After heating the baths on wheels it is recommended to bring to 600C, after which - start to stealthily steaming. In general, if you are interested in installing a boiler you can read about it here.
Scheme of installation of the oven for a bath on wheels
A stove in a bath is common - a stove with a welded tank for warming up hot water and a platform for a stove. How to be with the stones to get a dry steam? On the road, they can roll and fall to the floor. There is an exit. Fans of the classics drill every flat stone. Wire is made of stainless steel into the holes obtained. Obtained a kind of beads. They are for safety and weight reduction, can be removed from the heater and during the trip to transport in the cabin or at all, in another car.
One of the innovative solutions is the abandonment of the classic stove filling. Instead of natural stones, ceramic insulators are used for high-voltage transmission lines. They are easy to put on the wire, and the pair give no less than warmed stones. In addition, not every cobblestone is safe. Some sedimentary rocks contain harmful minerals, the evaporation of which is harmful to health.
Variants of planning inside the bath on wheels: there are enough seats for everyone!
Exterior finish
Siding made of natural wood used for finishing the sauna outside, can not be compared with plastic walls on which the contours of logs are drawn. A real sense of comfort can only come from natural materials. A bath with no wheels should not be anything different from a stationary one.
For puschego Force it is possible to arrange carved frames on the window and elegant steps. Kerosene lanterns add as a master stroke.
This will ensure the complete safety of people in the steam room.
Interior decoration
Finishing inside the mobile bath is no different from that in a stationary bath. Fully insulated, decorated with wood and decorated to the taste of the owner. However, one should take into account the susceptibility to shaking during the transport of the bath. Therefore, all fasteners must be made to the conscience. That nothing is shaken and fell suddenly on his head. Also, the bench inside the bath should not move out, especially towards the red-hot oven.
The covering of the walls of the steam room from the inside is done first with a foil sheet, on which the lining is subsequently nailed. Optimal, from natural linden. With a similar finish in the bath you can perform all the necessary medical and hygienic procedures: rubbed with honey and herbs.
After washing, the baths are cleaned using a hose with water. In order for the bath to dry from the inside, it is enough to hold the door open.
Interior of bathhouse on wheels
For convenience, the shelves are folded, like a shelf in a reserved car. If the area allows, inside arrange a shower and even a bio-toilet. In the rest room set a bench and a tank of cold water.
Interior inside
In a large bathhouse you can arrange a bar as a beer bar, and a plasma TV can be hung on the wall. Get a full range of services, not less than in the Sandunov Baths.
For the purpose of earning it is enough to indicate the phone number on board the machine. From willing there will be no release. The price of such a service on the market is 800-1000 rubles per hour.
Video - Bath on the Wheels
