Is it worth painting or not?
First let's see if it is possible to paint the paving slab. Yes, it can be dyed to extend the service life, as a layer is created on the surface, which protects it from all aggressive external factors. Used for this are alkyd, polyurethane and rubber paints, which make the surface less slippery and prevent its erasure and destruction.
However, despite the possibility of performing this procedure, it is still recommended to buy a colored tile. In its production, a dye for paving tiles is added, which allows achieving any color. In turn, this eliminates the need to do painting. But, if you did decide to do it for some reason, you need to know a lot of nuances.
Specialists recommend using rubber compounds. This is due to their advantages:
- Elasticity;
- Flameproof;
- Water and weather resistance;
- Resistance to wear.
Rubber coating does not slip, which helps to avoid injuries, especially in cold seasons and during rain. The basis of such compositions are acrylic polymers, which provide durability even under severe mechanical stresses. Also, the protective layer protects the tile from moisture and temperature changes.
Paint for paving slabs: how to apply it?
Consider how to paint the paving slab. First of all, the surface is prepared. To do this, all dirt and sand is swept away with a brush or a vacuum cleaner. After that, the entire sidewalk is wetted with water from the garden hose and left to allow it to dry. For best results, you can use a washing machine that will clean the surface with a powerful head of water. But, using this machine, you need to know how to use it, so as not to damage individual tiles.
Tip! On the use of a washing machine for the sidewalk, you can consult with the seller in the cabin rental or purchase of this equipment.
During the painting, the composition must be regularly mixed. The first coat of paint is recommended to dilute with 20% mineral turpentine. However, it is necessary to familiarize yourself with the instruction for using the formulation in order to apply it correctly. Addition of turpentine will increase the adhesion of the first layer to the sidewalk. Dilute it in a separate bucket or tray. The remaining layers( two or three, depending on the situation) are applied in full force with a brush or roller. Between the application of each layer it is necessary to let them dry. On the drying time, also look at the manufacturer's packaging.
What you need to know
The painting of the paving slab is complete. Next, you need to remove all the stains from the jars and close the lid tightly. Immediately after painting, wash all tools that have been soiled with the compound. To do this, use turpentine and rinse with water. If you do not immediately wash the brush and roller, they will be spoiled, and in the future they will not be able to use them.
Before you start, you must know what the weather conditions will be like in the next few days. If the air temperature is below +10 degrees Celsius, then it's better to refrain from work. It should also be done if rain is forecasted in the next 12 hours. Dispose of all residues of paint and turpentine in an appropriate way and in no case pour them into the drain or the sink.
Tip! It is better to start work when the next 48 hours are not planned to precipitate or reduce the temperature, this will allow the paint to harden the best way.