About the stained-glass film
Everyone knows that stained glass is a rather expensive treat that can be afforded by a few. Interior, containing at least one such glass, cardinally changes its appearance. But for those who can not afford the classic option, there is one of the varieties - film stained glass.
It almost does not differ from the original, but its cost is much lower. The film has a self-adhesive component, Mylar , which is super-transparent and retains its shape. The color pigment is moisture resistant and does not fade. In addition, it is sufficiently resistant to aggressive influences and solvents.
Thanks to the connection of the component of the Mylar and the ultraviolet filter, the color becomes as much as possible protected from external influences and also compacted. Sealing imparts gloss to the glass and protects against damage by means of cleaning and from scratches.
Properties of the stained-glass adhesive film
The film for the stained-glass windows of
It can be glued to the windows of doors and windows, on one or both sides. This increases the strength of the glass, and in case of breaking it keeps the glass in the frame and does not allow it to crumble. If the film is glued on one side, then it is better to choose the inside.
The film for the stained-glass window is made with a thickness of 75 microns, its transparency depends on the transparency of the glass. It can be glued at a temperature of at least +4 ° C.The advantage of this stained glass window is the ability to use acrylic or tempered glass as a surface. Due to the use of lead wires of different widths and colors, the stained-glass window looks very decorative. Two-millimeter cores are good to create small elements of the pattern.
Features of the film and its use
Stained glass film on the mirror and glass has several positive characteristics:
- rapid fabrication;
- the strength of the stained glass is larger than that made up of small individual glass;
- is an acceptable price, namely, the price-quality ratio;
- resistance to ultraviolet rays, which means that an obstacle is created for them;
- moisture resistance, the film is not afraid of water and moisture.
Transparent stained glass with a picture for windows should be glued to a low-fat and clean glass. It is best to treat glass with isopropyl alcohol. Do not use aggressive solvents for cleaning, their fumes can spoil the film, that is, soften the glue and promote the formation of whitish spots.
After washing the glass with water, do not wait for full drying or wipe dry with a rag. The surface must be wet. This will help correctly position the film on the surface.
Next, the film is taken, on the underside of which the paper protective layer is removed, and applied to the glass. Then, using a dry napkin, the bubbles are smoothed out, and water and air are expelled. Then the film needs to be wiped dry. The above should be given due attention.
