How to glue a pvc panel: wall requirements for
Naturally, not every coating can be applied with glue and not everyone can glue together with another element. PVC panels are fixed according to certain laws, for non-observance of which you can pay with your money and priceless time.
- Surface roughness. On it there should be no curvatures and roughnesses, except for this, pits or drops of not more than 4-5 mm. In case of excess, the plastic will not simply stick, or it will be broken.
- Surface condition. A well-known fact that it is difficult to glue something to the greasy and dusty plane. So, you have to clean the panels and wash off whitewash and dust, get rid of fat household chemicals.
How to glue the pvc mosaic and pick up the glue
The most correct option for gluing the pvc is the mounting glue "Moment", which is designed for technical and decorative gluing of parts.
When using this adhesive, the pistol technique is used, which allows it to be applied pointwise.
In addition, there are also such adhesives: liquid nails, assembly foam and tile adhesive( cement).All of them easily perform their immediate function, but each of them is not perfect.
If we talk about thermo-adhesives, then it's worth remembering the plastic's ability to expand, which can lead to sheet lag. Such a dirty trick will manifest itself over time, when, with constant thermal impact, the sheet simply does not have a place to expand, but instead falls off altogether.
Liquid nails do not cause such situations, but it is best to apply non-expanding sealant, which is sold in every construction shop. It is ductile and heat resistant. Professionals use only it.
How to glue PVC panels on video
Wall decoration with plastic with glue composition is a popular method of repairing walls at the moment. On the video you can learn how to select panels and how they are most often mounted.
How to glue a pvc panel: the specifics of laying on the
glue As with any other kind of finishing work, the plastic cladding process begins with the preparation of the coating. First it needs to be cleaned and primed, but before you start the primer, you should do a few more actions.
- Angles. Often in such rooms as a bathroom or toilet, the corners are rounded, so that they become geometrically even, they are equaled by a perforator. If this is not done, every turn of the wall to display plastic will be extremely difficult for you, which means that this will also affect the uniformity of the surface. With the help of a powerful hair dryer, the plastic sheet can be bent, but if there is not such a possibility?
When forming corners, the inside can be cut to bend, but an angle of 90 degrees will look much better than 60 or 120.
- Procurement of the starting strip. This is not done if you plan to install a plinth and you will mount the ceiling from plastic. But it is necessary in order to make the connection of the panel with the floor covering neat.
- And now we proceed to the PVC panels themselves. It needs to be cut in accordance with the desired length and a large room, then cleaned of dust with a tissue. After applying the glue. By the way, it can also be applied in different ways. If the room has good walls, the glue is applied along the perimeter of the strip and in the middle, and if the walls are, to put it mildly, uneven, the glue is marked pointwise. Doing everything as written in the recommendations, you can be calm, the panels will stick to the wall in the best way.
- Panel with glue applied to the wall. But there are some peculiarities of gluing for each adhesive composition:
- Liquid nails. They must be left for 5 minutes "cool", so that they can harden to the extent that they reliably adhere to the wall. Liquid nails are best glued sheets.
- Sealant. It is always necessary to press against the wall until it stops falling behind.
Advice: do not necessarily buy factory connections and try to screw them. It is enough to use the usual plastic corners, which are easy to glue on silicone or sealant. Select for the angles width of these inserts can be in the range of 20 to 50 mm.
Good luck in repair!