The secret of the successful use of corrugated board
Any person wants to have a beautiful and cozy house in which one can live for many years and leave it to the children. And an excellent assistant in the implementation of these ideas can serve as a corrugated board. This material allows you to build a beautiful and reliable fence for the site, protect the roof of your house, and also update the old wall covering.
Profiled sheeting is a profiled sheet, made of galvanized steel by the cold rolling method. In appearance, they are corrugated sheets of various shapes. The waves are sinusoidal, trapezoidal, and also rounded.
But the choice of appearance is not limited to. To this material served for a long time, reliably and pleased the eye, it must be properly secured. The method of mounting each house master chooses independently, but in order to protect yourself from intruders and weather anomalies, the mount must be reliable. There are several types of fastening, it is worth considering them in more detail.
Self-tapping for corrugated board: characteristic of
Very often in places of fastenings it is possible to observe the formation of rust. To avoid this, it is necessary to use amdores with for corrugated board with EPDM spacer .They are made of galvanized high-quality stainless or carbon steel. Scope: roofing works, erection of fences and walls. Also, these screws are produced with a colorful coating that makes them invisible against the background of the corrugated board. In addition, the self-tapping screws for the profile sheet are of three types:
- for fixing the profiled sheet to the wooden frame;
- for fixing corrugated board, subject to strong wind loads;
- for fixing ridge elements.
Screws for fixing corrugated board have one distinctive feature, they have a special tip-drill, which allows you to use only a screwdriver from an electric tool. In addition, work with self-tapping screws of this type allows to reduce the number of fastening operations, labor costs, and, consequently, the efficiency of work.
Rivets and screws for corrugated board - features of application
Rivets for corrugated board are designed for permanent joining of profiled sheets with solid materials of construction. They consist of an aluminum cap( steel) and a steel leg. In addition, there are unpainted and colored. The diameter of the rivets is 3.2-6.5 mm. The fixing of the deck is carried out with the help of a special hand gun. On average, 6-8 rivets are used per 1 m of coverage.
Screws for corrugated board are rods with a sharp thread and a head. The rod of the screw consists of two sections: with thread and without thread. There are screws for wood, metal and universal. Designed for wood have a larger thread than for metal. Are used to create a detachable connection between surfaces.
In the surface, it is necessary to drill a hole into which the screw is screwed, thus creating a thread inside the surface.
In general, it should be said that in addition to fixing the corrugated board, the field of application of metalware is the widest. Hardware is classically used in the manufacture of furniture, in mechanical engineering, in finishing works. In the field of application they can be:
- for fixing chipboard and wooden products, stand out with a rare thread;
- self tapping screws are distinguished by frequent carving and have a sharp tip-drill;
- for fastening gipsokartonnyh sheets, are equipped with a countersunk head, which allows to avoid deformation of the top layer of gipsokartonnyh sheets at tight pressing against profiles;
- for roofing, complete with sealing washer with rubber gasket, which helps to seal the holes;
- for window profiles and furniture fittings, have a decorative head and a drill bit with a frequent thread.