The problems in the washing machine operation fall into two main groups:reacts to the activation and the machine turns on, but the washing program does not start.
The washing machine does not respond to the inclusion of
First of all, please check if there is electricity in the apartment. It is possible that the house was turned off or there was a short circuit that knocked out the security plugs. Check the machine and, if it is off, cock the lever. Failed again? Then look for the reason for the closure.
A residual current device( RCD) serves as a cause of power failure. This happens if the body of the washing machine is under voltage, and when you touch it, you are struck by an electric shock.
Carefully inspect the power cord - the cord from the washing machine. The probability of its breakage or damage due to frequent bends and other mechanical loads is high. To check the integrity of the cord, use a special electrical measuring instrument - a multimeter( or a tester).Replace the damaged wire. If this is not possible, find a break, connect the fragments of the cord by twisting and fix it with tape or solder. Please note, this method is an extreme measure.
Note the operation of the extension cord through which the washing machine is connected. To do this, plug the machine into the power outlet directly.
Sometimes the problem lies in the malfunction of the power outlet itself. Its suitability can be easily verified by switching on another device through it. If it works, the socket is working.
For a number of washing machines, the power is output to the power button. Its state is checked by a multimeter operating in the buzzer( sound emitter) mode. Having disconnected the machine from the mains, ring the button in the "on" position. If the device emits a sound - the current passes properly. In the off mode, the tester will remain silent. If a malfunction is detected, the power button must be replaced.
In devices of brands LG, Indesit, Samsung, Hotpoint Ariston, Bosch, Ardo, Electrolux, there is a FPS or an interference filter. Its purpose is to neutralize the electromagnetic radiation emanating from the washing machine and capable of influencing the operation of other household appliances. Usually the FPS breaks down for a long period of time or because of a short circuit. If it breaks, the electrical circuit is interrupted, the current supply is broken, and the machine does not show signs of life. To check the status of the filter, use the tester. Call first the input( to it conduct three wires), and then - output( there are two wires).The FPS is faulty and needs to be replaced if the voltage is detected at the input, but is not present at the output.
Inspect the control module. It is a printed circuit board that regulates the control of parts and assemblies of the entire device. Here is a microprocessor, which ensures the smooth operation of the elements of the machine.
To determine the cause of the problem, investigate the details of the electronic module. A damaged element or a punched track is detected by ringing with a multimeter, and then replaced or soldered. Before you repair, evaluate your own strength.
A person who has sufficient skills and relevant qualifications can repair a damaged board. Buying a new module is a costly business, so, in order not to risk, contact the professionals.
The washing machine is turned on, but the washing does not begin
The washing program does not start, although the light indicators work in the standard mode
Make sure that the hatch is tightly closed after loading the laundry. Otherwise, a special protective mechanism will not allow filling the drum with water. Then make sure that the hatch has been locked after the program starts. If the door simply snaps into place, check to see if it is live. Is the current flowing and the hatch is not blocked? Then the lock device will have to be replaced.
Watch how the drum fills with water. The presence of unusual sounds or complete silence signal that the ingress of water inside is difficult, and the machine simply has nothing to erase.
Did not help? Make sure that you have chosen the right program of washing( do not press a few buttons at the same time or accidentally did not poke past).If in doubt, turn off the machine for 30-40 seconds, and then turn it back on. The malfunction will be fixed.
Indicators randomly flash or light up simultaneously
In this case, look for the cause of the fault in the faulty wiring. In most models LG, Indesit, Samsung, Hotpoint Ariston, Bosch. Ardo, Electrolux wires often come into contact with the internal parts, because of what eventually they are damaged. Check the condition of the cables by the tester and replace the problem area.
The problem can also be covered in blown capacitors, which should be replaced.
These simple tips will quickly and competently eliminate common problems that arise in the operation of your washing machine.
