How to make a roof made of corrugated board - general characteristics of the roofing material
The repeatedly increasing structural stiffness of the material, the great variety and simplicity of execution have turned profiled flooring into an extremely wide application, including combined composite panels with various types of insulation, etc.
The types of such materials produced by the industry are usually distinguished by the height of the stiffeners, combining them into three main groups. The division is very conditional and does not mean the impossibility of applying, say, a wall panel for a roofing device and vice versa. By the way, since we are talking about the wall material, we note that the height of the ribs in this category varies from six to twenty millimeters.
A group of load-bearing materials form sheets with an edge height of over forty-four millimeters. Accordingly, the middle belongs to a group of standard sizes, called roofing, with a stiffener from twenty to forty-four millimeters. Faced with the need to provide low cost for the roof, there is nothing better than how to make a roof of corrugated board.
It is necessary to take into account the small weight of a square meter of material, its durability. The combination of these qualities with the already mentioned stiffness, strength, variety of anticorrosive finish and color scale, represents a very advantageous and high-quality version.
Some noise or "drum" effect is completely eliminated by the use of a special soundproof layer or the panels already mentioned combined with a heater.
Roof roofing with corrugated board - we collect everything we need and deliver it to the
platform. The roofing device from the materials discussed is not very difficult, but before you start the work, it's worth taking some time to learn in detail how to properly make a roof from the corrugated board.
First about buying, delivering and unloading. To get better at wholesale warehouses-shops together with fastening material, etc. Perhaps, touched by a large order, sellers will lose in price and even help with transport: this is practiced in some construction trading bases.
During transportation, it is better to place the package horizontally on a solid base, which guarantees protection against mechanical impact and damage. Similar measures should be taken during unloading. The estimated number of loaders should be at least one per two meters of the length of the profile sheet.
During the installation, sloping lags are arranged to lift each of them, along which the sequential movement is carried out. The apparent insignificance and obviousness of these measures, however, must be observed to ensure an attractive appearance of the roof and its quality.
How to properly make a roof from corrugated board - tips during mounting
In the process of work, it is ideal to consider the case when the length of each sheet provides a complete coverage of the entire ramp, including overhangs of at least half a meter. However, it is possible that when such a slope does not completely cover the acquired roofing for the roof, the installation instruction in this case recommends stacking in rows from the edges along the length.
In each row, the joints are overlapped by twenty centimeters with the filling of the gaps with mastics on the bitumen base. All material is mounted on the crate with a step of not more than forty centimeters and waterproofing, along which the slats break through to ensure ventilation between it and the sheet of decking.
Fastening of the roof is performed by self-tapping screws at low revolutions of a screwdriver or drill with the use of special rubber gaskets for compaction. During the work, it is necessary to protect the surface of the material from damage and deflections, using supports and supports, as well as soft shoes. Small fragments of chips should be removed with a brush. In addition, it is necessary to comply with safety rules when working at height: eye protection, hands, appropriate clothing, etc.
