Despite the appearance of reinforced concrete structures and other building materials, brick is still a universal component for the formation of walls. It is not always possible to make a clutch with your own hands - lack of experience, time does not allow you to perform this work yourself. Therefore, before hiring experts it is necessary to analyze the cost of their services.
What affects the cost of work
First of all, you need to determine - what factors affect the price of brickwork. As in any other service.there should be transparent mechanisms of formation of value. When analyzing the proposals of many companies, you can see only approximate figures for the cost of brickwork per square meter.
Therefore, before you place an order - you need to clarify its details. They can directly affect the construction budget:
- Type of brickwork. It determines the labor intensity of work and is the main factor in the formation of value.
- Planned volume. In most cases, with large volumes, you can discuss the size of the discount.
- Location of the construction site.
- Working height. For the construction of buildings with a height of more than two floors, additional equipment and scaffolding will be required.
In addition to these factors, the individual requirements of the customer can be taken into account when calculating the cost. In particular - the quality of joints between bricks, the composition of the mortar used, etc. But for the initial analysis of the price it is enough to know the offers on the market based only on the first condition - the type of brickwork.
Supporting walls
In the professional building environment, it is also called black masonry. For its formation, not only brick, but also a cinder block, concrete blocks are used.
It is executed in several rows of bricks. Most often this technology is used for the formation of bearing walls. The complexity of the process lies in the strict observance of the geometry of the structure. Even a slight deviation of the wall can lead to a disruption in load distribution.
Depending on the materials used, the roughing is divided into the following types:
- With reinforcement. It is necessary to strengthen the wall.
- Without reinforcement. Allows you to save on construction, but in some cases affects the performance.
Partitions
This is one of the most popular ways of building construction. The main frame is made of reinforced concrete structures, which in their technical parameters largely exceed the brick walls. But for the formation of internal walls and partitions, the best option would be the use of bricks.
In half-brick
In order to save building materials, small internal partitions can be made in half-brick. The specificity of this laying is the location of the components of the structure - the spoon part is located outside. However, this method is applicable only for walls of a small area. Otherwise, the probability of destruction is high.
In brick
The technology of laying in a whole brick is almost completely analogous to the above. The difference is only in the amount of work.
Such a technique can be applied not only for the erection of partitions, but also for the walls of small structures. Depending on the conditions, it is possible to use reinforced mesh to reinforce the structure.
Cladding brick installation
Along with the construction of walls of partitions, there are facing types of bricks. They perform several functions. Aesthetic - gives the facade of the building a unique appearance. Practical - increases the degree of thermal insulation of the building, prevents moisture from entering inside the main walls.
The price for this type of work depends on the size of the raw materials, the complexity of the picture and the total area. It is important that after the end of the cladding of the facing brick, the facade of the building acquires a unique appearance without loss of quality.