The basic prices for cutting a Bulgarian metal are the table

The ESM does not apply to power tools, which can be called widespread. For example, products such as a perforator( electric drill) or a screwdriver, available in almost every home. But if necessary, to cut metal when doing any household work "Bulgarian" is simply irreplaceable.

Precision nesting, the absence of "torn" seams, high speed, mobility - only a brief list of all its advantages. Only here to acquire the USM, if it is rarely used, it is hardly worth it - even the simplest model is cheaper than 3 900 rubles not to find. Plus - disks and nozzles for the Bulgarian. But to invite specialists or rent a "Bulgarian" - the decision is quite acceptable. How much will it cost?

Estimated prices for metal cutting USM

To list all available types, the range of metal products is unrealistic. But the above data is enough to make a general idea of ​​how much specialists will have to pay for the work.

All dimensions are in mm.

Sample type	Thickness of metal	Linear parameters	Diameter	Operating cost ( rub / 1 cut)
Profile pipe	1,5	15 x 15	9.65
20 x 10	10,1
25 x 25	12, 3
40 x 25	17.4
50 x 50	22,5
2
40 x 60	25,2
80 x 80	69
Round pipe	15	7.8
20	9.8
25	11,8
50	19,6
89	29
102 - 114	40,1
159	54,8
Channeling	6.5 x 8	19
12	29.6
16	44.8
20	59
24	69.4
Rod	8	4.98
10	5.98
12	7.98
16	16,1
22	21.9
Square ( with face)	10	6.1
12	8.1
16	16,2
20	20,2
Strip	4	20	2,99
30	4.2
40	6.98
50	7.98
5	9.98
Corner ( with side)	20 - 25	5.8
35	6.8
40	7,8
50	9,8
I-beam	10	39
14	49
18	64
25	88
Profiled sheeting	from 31
Siding	32
Tile	43

Cost of renting the "Bulgarian"

Price depends on its capacity. Therefore, you can only give estimates. The fee is calculated daily - from 169 to 430 rubles. But about the terms of the lease, the existing discounts should be specified on the spot, when concluding the contract.